• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5452-5457
• /
• 2012

It is saving material cost and construction cost by replacing conventional building materials, and It has advantages for aesthetic value. In the Europe, the United States, Japan and other country research about BIPV is actively being carried out and marketability is also being infinity expanding. Arch type PV systems efficiency characteristics is different depending on PV array's directly connection, parallel connection and arches angle, but is a lack of analysis on this nowadays. When the arch type PV system design up, they consider about aesthetic value and they didn't consider about generation efficiency. In this paper, we try to improve the efficiency through optimization of arch type PV system and estimation of the efficiency parameters of the arch type PV system, such as latitude, longitude, temperature, insolation, arch angle and each kind loss from system organization. For improving Arched PV system efficiency, proposed multiple control inverter system, and using simulation tool of Arched PV system "Solar pro", flat-plate type and many arch type PV system configuration the driving characteristics were compared and analyzed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.1
• /
• pp.71-78
• /
• 2020

In the case of power generation using renewable energy, power production may not be smooth due to the influence of the weather. The energy storage system (ESS) is used to increase the efficiency of solar and wind power generation. ESS has been continuously fired due to a lack of battery protection systems, operation management, and control system, or careless installation, leading to very big casualties and economic losses. ESS stability and battery protection system operation management technology is indispensable. In this paper, we present a battery level calculation algorithm and a failure prediction algorithm for ESS optimization and stable operation. The proposed algorithm calculates the correct battery level by accumulating the current amount in real-time when the battery is charged and discharged, and calculates the battery failure by using the voltage imbalance between battery cells. The proposed algorithms can predict the exact battery level and failure required to operate the ESS optimally. Therefore, accurate status information on ESS battery can be measured and reliably monitored to prevent large accidents.

• Journal of IKEEE
• /
• v.13 no.4
• /
• pp.116-124
• /
• 2009

Recently the CPU performance of modem chipsets or multimedia processors of mobile phone is as high as notebook PC. That is why mobile phone has been emerged as a leading ICON on the convergence of consumer electronics. The various applications of mobile phone such as DMB, digital camera, video telephony and internet full browsing are servicing to consumers. To meet all the demands the image quality has been increasingly important. Mobile phone is a portable device which is widely using in both the indoor and outside environments, so it is needed to be overcome to deteriorate image quality depending on environmental light source. Furthermore touch window is popular on the mobile display panel and it makes contrast loss because of low transmittance of ITO film. This paper presents the image enhancement algorithm to be embedded on image enhancement SoC. In contrast enhancement, we propose Clipped histogram stretching method to make it adaptive with the input images, while S-shape curve and gain/offset method for the static application And CIELCh color space is used to sunlight readability enhancement by controlling the lightness and chroma components which is depended on the sensing value of light sensor. Finally the performance of proposed algorithm is evaluated by using histogram, RGB pixel distribution, entropy and dynamic range of resultant images. We expect that the proposed algorithm is suitable for image enhancement of embedded SoC system which is applicable for the small-sized mobile display.

• The Korean Journal of Ecology
• /
• v.4 no.3_4
• /
• pp.59-67
• /
• 1981

Stomatal resistances of the leaves in Heteromeres arbutifolia and of the stems in Ferocactus acanthodes were studied to estimate active and passive behaviors of the guard cells on a theoretical basis. Active and passive stomatal responses to light and water deficit were observed. When the change rate of existent water due to variation of osmotic potential in the guard cells and the loss rate of transpirational water from the guard cells are $\Delta$wi-$\Delta$wt and leaded to active behaviors for opening and closing stomata. However, when stems of F. acanthodes with stomata closecd under the solar irradiation were covered with black cloth and then taken off, behaviors of the guard cells occurred in the condition of $\Delta$wi<$\Delta$wt and were passive. Under the conditiion of $\Delta$wi<$\Delta$wt due to cutout from stems, passive behaviors of the guard cells in H. arbutifolia and F. acanthodes always occurred in spite of the solar irradiation and darkness, respectively. The transpirational resistance coefficients of the guard cells in stems of F. acanthodes (0.380) and Opuntia bigelovii (0.135) wer emuch higher than in leaves of H. arbutifolia (0.034). Moreover, stomatal opening in stems of F. acanthodes during the daytime could be induced by watering. Those results are interpreted as that since the guard cells in desert Crassulacean acid metabolism (CAM) plants always exist in the state of stomatal opening, nocturnal stomatal opening and daytime stomatal closing are exhibited by passive behaviors of the guard cells in the alternant conditioins of $\Delta$wi>$\Delta$wt and $\Delta$wi<$\Delta$wt, respectively.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.2
• /
• pp.170-176
• /
• 2012

In the nuclear industry, wall thinning defect of straight pipe occur the enormous loss in life evaluation and safety evaluation. To use non-destructive technique, we measure deformation, vibration, defect evaluation. But, this techniques are a weak that is the measurement of the wide area is difficult and the time is caught long. In the secondary side of nuclear power plants mostly used steel pipe, artificiality wall thinning defect make in the side and different thickness make to the each other, wall thinning defect part of deformation measure by using shearography. In addition, optical measurement through deformation, vibration, defect evaluation evaluate pipe and thickness defects of pressure vessel is to evaluate quantitatively. By shearography interferometry to measure the pipe's internal wall thinning defect and the variation of pressure use the proposed technique, the quantitative defect is to evaluate the thickness of the surplus. The amount of deformation use thickness of surplus prediction of the actual thickness defect and approximately 7 percent error by ensure reliability. According to pressure the amount of deformation and the thickness of the surplus through DB construction, nuclear power plant pipe use wall thinning part soundness evaluation. In this study, pressure vessel of thickness defect measure proposed nuclear pipe of wall thinning defect prediction and integrity assessment technology development. As a basic research defected theory and experiment, pressure vessel of advanced stability and soundness and maintainability is expected to contribute foundation establishment.

• Journal of Plant Biotechnology
• /
• v.44 no.4
• /
• pp.409-415
• /
• 2017

The vegetation period of trees might be prolonged by the delay of the leaf senescence in autumn. Thus, we focused on the generation of senescence-delayed transgenic trees to enhance biomass production. The PagMYC2, a gene containing the basic helix-loop-helix domain, was selected as a candidate for a senescence-delayed transgenic tree. The PagMYC2 gene was specifically induced after treatment with phytohormone jasmonic acid, and upregulated by abiotic stresses such as salinity, osmotic pressure and a low temperature. The constitutive overexpression of the PagMYC2 delayed the leaf senescence and inhibited chlorophyll degradation in the transgenic poplars. Leaf senescence analysis was performed in the leaf tissues of the PagMYC2-over-expression transgenic poplars. The transgenic poplars exhibited higher photochemical efficiency than did a wild type plant under a short-day condition (6 hours light/18 hours darkness) or a low temperature condition ($15^{\circ}C$) that was similar to the weather conditions of autumn. These results suggest that the PagMYC2 is a useful genetic resource to improve biomass production, which is able to sustain growth with senescence-delayed leaves for a long time in autumn.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.2
• /
• pp.177-182
• /
• 2008

The Gemological characteristics of B.C. jade from Cassiar Mine, British Colombia, Canada, have been investigated, using polarizing microscopy, Mohs' hardness, refractive index and density measurements, X-ray powder diffraction, X-ray fluorescence spectrometry, ICP-MS, Infrared absorption spectrometry, and DTA/TGA. The B.C. jade is deeply green (spinach peen or olive green) in color and is translucent. It shows a resinous or waxy luster. The principal mineral of the material is tremolite-actinolite solid solution and minor amount of Cr-garnet and unidentified opaque minerals are accompanied. Mohs' hardness value ($5.5{\sim}6$). refractive index (1.62), and specific gravity (3.01) are measured. It is very highly tough and shows hackly fracture. The high Fe content ($Fe_2O_3\;4.14{\sim}4.66\;wt%$) in B.C. jade is attributable to a deepening of green color of the material. The B.C. jade starts to dehydrate at v and dehydration is completed at $1000.8^{\circ}C$, transforming tremolite-actinolite solid solution to enstatite, diopside, quartz, and water in its place. This possible reaction is supported by the weight loss of B.C. jade (1.93 wt%) at $1000.8^{\circ}C$ indicated by TGA curve.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.83-89
• /
• 2018

The thermal characteristics of concrete specimens were analyzed using cement paste specimens with artificial cracks. In order to understand the temperature characteristics of the specimen depending on the crack depth, the specimen was heated and the minimum temperatures of the specimens at which cracks appear were investigated according to the crack depth. It was confirmed that the surface temperature distribution of the specimen varies depending on whether the specimen is cracked or not, because of the single and multiple reflections of the incident energy. Furthermore, as the temperature distribution of the specimen reaches a steady state, the temperature data tends to decrease with the crack depth. Through the observation of the normalized temperatures, it was found that the temperature of the specimens obtained from this experiment reached a steady state after 10 minutes. At this time, the standard deviation of the normalized temperature is around 0.01 or less, and the temperature decreases linearly with increasing crack depth. This result is considered to be closely related to the area where multiple reflections occur in the cracked region. If the correlation between the crack region and the incident energy is analyzed for various specimens, it can be applied to the diffuse reflection of the light.

• Journal of Korea Soil Environment Society
• /
• v.5 no.1
• /
• pp.75-83
• /
• 2000

Recently, many landfills are constructed by using geosynthetics with earth materials. Geotextiles in geosynthetics are applied for the various purposes such as filters of the leachate collection and removal system and protectors of geomembrane liner. However geotextiles can be exposed to direct sunlight during the construction of landfill for several months. As you know the exposure of polymers to sunlight can be a major source of degradation of them. This study is to suggest a criteria on the installation of heavy weight geotextiles at the landfill. For this purpose, several different geotextiles were evaluated by outdoor exposure at two different locations and under the different seasons for one and half years. As the results of outdoor exposure, polypropylene geotextiles with 500g/$m^2$ and 700g/$\textrm{m}^2$were maintained around 40% of the initial strength during for one and half years. However, the polypropylene geotextile of 1000g/$\textrm{m}^2$showed 65% of the retained strength for the same duration of exposure. The retained strength of all polypropylene geotextile reduced dramatically with the cumulative sunshine radiation on a horizontal surface of around 1500MJ/$\textrm{m}^2$.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.9
• /
• pp.482-496
• /
• 2016

Algal blooms of cyanobacteria (blue-green Algae) due to the eutrophication of rivers and lakes can cause not only the damage by its biological toxins but also the economic loss in drinking water treatment. The natural algae coagulant, a commercial product known as W.H. containing the algicidal and allelopathic material derived from oak, can control algal problems proactively through the coagulation flotation process. However, because there have been no applications of the process for pre-treatment in drinking water plants, we could find no report on the optimum injection dose of W.H.. In this study, we have conducted several sets of jar-tests while changing W.H. dose and concentration of chl-a for (1) Han-river samples and (2) subcultured cyanobacteria samples, and monitored the removal mechanisms of algae intensively. Based on these jar-test results, two linear equations with variables of chl-a and turbidity have been deduced to predict the optimal W.H. dose after the multiple regression analysis using IBM-SPSS. Also, prototypes of automatic control logic have been suggested to inject the optimal W.H. dose promptly in response to the variation of water quality.