• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.251-255
• /
• 2007

In this paper, propagation analysis method in using 3D Ray Tracing propagation model in wireless cell planning is proposed. Through 3D Ray Tracing model, we can predict the distribution of propagation loss of the received signal. For correct and a low complex analysis, Quad Tree and Pre-Ordering and Hash Function algorithms are included in 3D Ray Tracing algorithm. And 3D Ray Tracing model is embodied in CellTREK that is developed by KT and used to plan Wibro system analysis. In CellTREK, propagation analysis is performed and that result is represented in 3D viewer. In numerical results, it is showed that the proposed scheme outperforms Modified HATA model when comparing with measurement data.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.6 no.3
• /
• pp.3-8
• /
• 2007

This study is for aspheric lens that is one of a core technology in the optical industry. The feature of a aspheric lens is not to have the spheric aberration. So in optical industry, aspheric lens are essential element to miniaturization, high effectiveness and light weight. In this study we applied a lay back-tracer method using the index of refraction to design aspheric lens. We developed the automatic design program for aspheric lens by user interfacing program VisualLISP in AutoCAD. And we manufactured aspheric lens and measured it.

• Journal of the Korean Society of Radiology
• /
• v.4 no.3
• /
• pp.27-31
• /
• 2010

Spatial resolution is determined by the performance of x-ray optics used in the x-ray imaging system. A zone plate was designed for obtaining a high spatial resolution image at x-ray energy of 8.5keV. A spatial resolution of 80 nm was estimated by the ray tracing when an x-ray tube of tungsten targe was used instead of synchrotron radiation. The designed zone plate of outermost zone width of 40nm was successfully fabricated by the electron-beam lithography.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.12
• /
• pp.3026-3032
• /
• 2000

To enhance the effective data transfer rate the multi-beam optical disk drive is presented. The Beam rotating actuator is necessary for putting multi-beam on more than one track. Ray tracing was also executed for real system set-up. The beam Rotating Actuator is made up of piezoelectric material, high stiffness wire hinge and dove prism. The actuator has about 1kHz natural frequency and suitable operational range. The dynamic equation for the actuator is derived for the control real system.

• Korean Journal of Optics and Photonics
• /
• v.6 no.1
• /
• pp.1-7
• /
• 1995

A IR zoom telescope system was designed for thermal imagery. The magnification is 4-14 and the focal length of eye piece is 25 mm. First, the frame was built up with first order optics and started design with 3rd order optics. There after, we can get the final design by optimization technique through finite ray tracing. The optical system was optimized with ray aberration or angular aberration including higer orders. Finally, The performance of the optical system was accessed by calculating the diffraction MTF from the design data. data.

• Korean Journal of Optics and Photonics
• /
• v.8 no.5
• /
• pp.431-437
• /
• 1997

A gradient-index (GRIN) substrate is proposed as a novel signal propagation medium of planar optics. The GRIN substrate provides planar-optics designers not only a 3-dimensional signal propagation space, but also an additional smart optical functioning component like as a diffraction-limited imaging lens. The novel and smart functioning of the GRIN substrate was confirmed by experiment on imaging of an input signal to multiple destinations.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.173-178
• /
• 2011

Nowadays, SELENE-2 is under development for the moon explorer rover in Japan. AXS(Active X-ray Spectrometer) sensor development among the candidated payloads will be on going by the world-wide co-operation. The thermal design, analysis and test will be specially performed by Korean institutes. CFD techniques are used for the conceptual design and analysis. Thin-shell plate meshes being applied by Monte-Carlo Ray Tracing Method are generated for the thermal radiation analysis. Lumped capacity model is employed for the thermal conduction simulation of the AXS payload itself. Various shapes of the payload configuration with thermal boundary conditions are proposed and selected on the purpose of the analysis of the initial design. The results of the analysis are supposed to be used as the baseline for the further detailed design of the AXS payload in the future.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04b
• /
• pp.634-636
• /
• 2000

기존의 병렬 볼륨 렌더링 방법들은 프로세서간의 발생하는 많은 통신량 때문에 통신 속도가 매우 빠른 병렬컴퓨터를 이용하였고 통신속도가 느린 분산 환경에서는 구현이 불가능해 보였다. 또한 가시화하려는 볼륨 데이터도 점점 방대해지고 있는 실정이다. 이에 본 논문에서는 통신 속도에 구애받지 앉을뿐더러 매우 큰 볼륨데이터를 다루는 병렬/분산 볼륨 렌더링을 제안한다. 본 방법은 고비용을 필요로 하는 원격 메모리 접근 대신에 압축을 기반으로 하여 필요한 데이터를 지역 메모리에서 빠르게 복원함으로써 좋은 성능향상(speedup)을 나타낸다. 이것은 각 프로세서가 전체 볼륨 데이터를 모두 적재하고 있다는 것을 의미한다. 다라서 렌더링 과정중에 발생하는 프로세서간의 통신을 최소화할 수 있었고, 이런 방식은 높은 통신 비용으로 효율적 병렬/분산 처리가 힘든 분산 메모리 병렬 컴퓨터나 PC/워크스테이션 클러스터상에서 매우 적합하다.

• Journal of Fashion Business
• /
• v.9 no.4
• /
• pp.170-177
• /
• 2005

Velvet fabric has soft touch, subtle luster, and good draping property. Threedimensional simulated models of cylindrical monofilaments constituting the velvet fabric were prepared. Image analysis techniques were used to measure the reflected light from the surface of velvet fabrics and the simulated images of the pile fibers. As the angle of incidence increased, the reflectance from the velvet surface became lower. Most of the reflection came from the tips of the cut piles. Crushed velvet type also was modeled using slant cylinder models on top of a base plate.

• Laser Solutions
• /
• v.17 no.1
• /
• pp.17-21
• /
• 2014

Head up display is in increasing demand for advanced devices in the modern luxury vehicles. It helps drivers focus on driving environment on the road. While HUD technology with LED has advanced, the brightness in daylight can be still an issue to be resolved. Laser light source is a possible solution to overcome the brightness problem and optimal optics design is required for the best performance. Sample design of optics is proposed and detail procedure of lens design evaluation is presented in this paper. The results were characterized by using a ray tracing method and qualitative analysis for spot and DEE is also presented. The overall error or image distortion remained in the target range of $25{\mu}m$ and the simulated image demonstrated possible use in the automotive applications.