• Korean Journal of Soil Science and Fertilizer
• /
• v.31
• /
• pp.36-44
• /
• 1998

우리 나라에서 토양의 점토광물에 관한 최초의 연구는 1958년 김제지방의 답 토양에 관한 연구로 (Dewan, 1958)시작되었다. 1960년대 시작하여 1970년대 까지는 주로 토양점토광물의 동정이 이루어 졌다. 점토광물의 동정(同定)에 사용된 잔적토(殘積土)(Residual Soil)로는 화강암(花崗岩), 화강편마암(花崗片麻岩), 현무암(玄武岩), 석회암(石灰岩), 혈암(頁岩), 제(第)3기층(紀層), 홍적층(洪積層) 유래 토양과 토양종류별(土壤種類別)로는 과부식회색토(寡腐植灰色土), 염류토(鹽類土), 충적토(沖積土), 적황색토(赤黃色土), 화산회토(火山灰土), 퇴적토(堆積土), 갈색토(褐色土), 암쇄토(岩碎土), 저위생산답(低位生産畓)이였으며, 토양점토광물(土壤粘土鑛物)과 작물수량성(作物收量性) 관계에 관한 연구가 실시되었다. 1980년대에 들어와서는 토양중의 1차광물과 점토광물의 풍화에 대한 안정도와 1차광물의 동정이 행해졌으며, 이밖에 Kaolinite 입자의 전하에 관한 연구등 점토광물의 흡착과 활성 연구, 점토광물의 토양개량재로서의 흡착과 화학적 특성 변화 연구와 점토광물의 토양개량 시용효과에 관한 연구가 행해졌다. 1990년대에 들어와서는 토양 중의 1차광물과 점토광물의 정량에 대한 자료가 축척되었고, 토양의 풍화에 대한 안정성과 생성기작, Zeolite와 새로운 광물이 합성되었다. 또한 합성광물을 이용한 농업과 산업광물로의 응용성 환경 산업에서의 적용가능성에 대한 평가가 시도되었다. 토양의 점토광물의 조성에 관한 연구는 토양 모재를 중심으로 이루어졌는데, 화강암(花崗岩)에서는 Halloysite, 화강편마암(花崗片麻岩)에서는 Kaolinite, Metahalloysite, Illite, 산성암(酸性岩)에서는 Kaolinite, Venrmiculite와 Chlorite의 중간광물, 현무암(玄武岩)에서는 Illite, Kaolinite, Vermiculite, 석회암(石灰岩)에서는 Vermiculite-Chlorite 중간광물, Kaolinite와 Illite, 혈암(頁岩)에서는 Kaolinite, Halloysite, Illite 외 Vermiculite-Chlorite, 화산회토(火山灰土)에서는 Allophane이 주광물이었다. Soil Taxonomy와 토양광물과의 관계에서, 답 토양에서는 Entisols의 주점토광물은 2:1형과 1:1형 광물이지만 Inceptisols와 Alfisols에서는 Halloysite가 대부분이다. 밭 토양의 경우는 Alfisols의 주점토광물은 Vermiculite, Illite, Kaolinite이었고, Ultisols에서는 Vermiculite-Chlorite 중간광물이었다. 산림토양에서는 Inceptisols중에서 Andept는 Allophane, Alfisols에서는 2:1 광물이지만, Ultisols에서는 Halloysite이다. 모재별 조암 광물의 풍화와 점토광물의 생성과정에서 화강암(花崗岩)과 화강편마암(花崗片麻岩)의 장석류(長石類)는 kaoline광물로, 이 밖의 운모광물(雲母鑛物), 녹니석(綠泥石), 각섬석(角閃石), 휘석(輝石)으로부터 생성된 illite, chlorite, vermiculite는 풍화중간에 혼층단계(混層段階)를 거쳐서 kaoline 광물로 풍화된다. 석회암(石灰岩) 토양의 smectite가 Mg농도가 높은 토양용액으로부터 침전되어 생성되었거나 운모 또는 chlorite에서 유래된 vermiculite의 변성작용에 의해 생성되고, 혈암(頁岩)토양의 점토에 illite가 주로 풍화에 저항성이 큰 미립자의 함수백운모(含水白雲母)로부터 유래되며, 현무암(玄武岩) 중의 장석류(長石類)는 kaoline광물로, 휘석(輝石)은 chlorite${\rightarrow}$illite의 풍화과정을 거친다. Zeolite, 함불석 Bentonite, Bentonite 등 우량점토 광물이 분포과 광물조성, 이화학적 특성이 조사되었고, 토양의 물리적, 화학적 성질의 개선을 필요로 하는 토양의 개량을 위해서 Bentonite, Zeolite, Vermiculite 등의 토양 개량재(改良材)로서의 기초연구와 이들 개량재 시용효과에 관한 연구 등이 주로 논토양에서 수행되었다. 점토광물과 수량관계를 보면 Montmorillonite를 주점토광물로 함유된 답 토양의 수도수량이 1:1 광물을 주점토광물로 함유하고 있는 토양에서의 수도수량 보다 높았다. 토양광물에 관한 기초연구(基礎硏究)로서 양이온교환능과 포화이온의 영향, 입자의 전기화학적 성질, 흡탈착 성질, 표면적과 등전점, 해성점토에 대한 압밀점토(壓密粘土)의 변형율(變形率)의 추정 등이 주로 연구되었다. 부가가치가 낮거나 폐기되는 광물을 이용하여 토양개량재 혹은 흡착제를 형성하는 연구가 알카리 처리에 의한 Zeolite 합성에 집중되었다.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.4
• /
• pp.331-339
• /
• 2008

In the upstream of Nakdong river in Bonghwa-gun, Gyeongsangbuk-do, certain areas of riverside were found to be covered by weathered mine tailings which were assumed to be migrated and deposited by flood. This study was conducted to investigate the formation and characteristics of the secondary minerals from tailings and related leaching behavior of heavy metals in the severely weathered tailing deposits by river waters. Quartz, feldspar, micas, chlorite, hornblende, talc, pyroxene (johannsenite), pyrite, and calcite were identified as primary minerals by XRD. Kaolinite can be formed by the weathering of tailings, but considering the short period of weathering time, kaolinite in the deposits is considered to be from unweathered tailings or moved from soils. The secondary minerals such as goethite, gypsum, basanite, and jarosite were also identified. The formation of the secondary minerals was affected by the species of primary minerals and pH conditions. The weathering of pyrite produced sulfate minerals such as gypsum, basanite, jarosite, and also goethite. Mn oxide was also identified by SEM, coated on the primary minerals such as quartz. This Mn oxide was poorly crystalline and thought to be the weathering product of johannsenite (Mn-pyroxene). The Fe and Mn oxides are the main minerals determining the brown/red and black colors of weathered tailings. EDS results showed that those oxides contain high concentrations of Pb, Zn, and As, indicating that, in the river, the formation of Fe and Mn oxides can control the behavior and leaching of heavy metals by co-precipitation or adsorption.

• The Journal of the Petrological Society of Korea
• /
• v.9 no.4
• /
• pp.205-210
• /
• 2000

Measurements of phase identification and degree of orientation for fine-grained (about 0.3 mm in diameter) minerals in rock samples performed by micro-area X-ray diffractometer.$Al_{2}SiO_{5}$ polymorphs (andalusite, kyanite and sillimanite) were chosen for the measurements and target minerals were existed on thin sections. Micro-area X-ray diffractometer is composed of 3(${\omega}\;{\chi}\;{\phi}$)-circle oscillating goniometer and position sensitive proportional counter (PSPC). $CuK_{\alpha}$ radiation was used as X-ray source and a pin hole ($50\;\mu\textrm{m}$$ in diameter) collimator was selected to focus radiation X-ray onto the target minerals. Phase identification and diffracted X-ray peak indexing were carried out by 3(${\omega}\;{\chi}\;{\phi}$)-circle oscillation measurement. Then, 2(${\omega}\;{\phi}$)-circle oscillation measurement was made for the purpose of searching the prevailing lattice plane of the minerals on thin section surface. Finally, for a selected peak by 2-circle oscillation measurement, X-ray pole figure measurement was executed for the purpose of check the degree of orientation of the single lattice direction and examine its pole distribution. As a result of 3-circle oscillation measurement, it was possible that phase identification among $Al_{2}SiO_{5}$ polymorphs. And from the results of 2-circle oscillation measurement and X-ray pole figure measurement, we recognized that poles of andalusite (122), kyanite (200) and sillimanite (310) lattice plances were well developed with direction normal to each mineral surface plane respectively. Therfore, the measurements used with micro-area X-ray diffractometer in this study will be a useful tool of phase identification and degree of orientation measurement for fine-grained rock forming minerals.

• 한국석유지질학회:학술대회논문집
• /
• autumn
• /
• pp.69-69
• /
• 2000

• Journal of the Mineralogical Society of Korea
• /
• v.32 no.4
• /
• pp.287-301
• /
• 2019

Preservation of the original form is the principle for conservation, management and utilization of cultural heritages. Thus, non-destructive analysis of these samples are important field of the conservation science. In this study, examined the applicability of nondestructive surface X-ray diffraction analysis (ND-XRD) for cultural heritage by materials (rock specimen, jade stone, pigment painted specimen, earthen artifact, metal artifact). In result, all type of sample is recorded suitable X-ray diffraction patterns for identifying mineral composition in case of surface condition with adequate particle size and arrangement. And diffraction pattern is reflected surface information than matrix. Therefore, ND-XRD is thought to be applicable not only mineral identification but also interpretation of manufacturing technique and alteration trend about layered sample (in horizontally or vertically). Whereas some exceptional diffraction patterns were recorded due to overlapping information on specific crystal planes. It caused by skip the sample treatment (powdering and randomly orientation). It could be advantageously used for mineral identification, such as preferred orientation of clay minerals. In contrast, irregular diffraction pattern caused by single crystalline effect is required careful evaluation.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.4
• /
• pp.395-402
• /
• 2010

Mineralogical characterization was performed for the mineral assemblages precipitated at the boundary between limestone bedrock and bat guano deposits in the Gossi Cave, Korea. Francoanellite, taranakite, ardealite, brushite and monetite are observed as phosphate minerals and gypsum and a small amount of barite as sulfate minerals in the guano deposits. With the increase of depth, phosphates are changed as following sequence: taranakite ${\rightarrow}$ francoanellite ${\rightarrow}$ ardealite ${\rightarrow}$ brushite ${\rightarrow}$ monetite. This sequence indicates that the major parameters controlling the physico-chemical conditions under which these mineral assemblages were deposited are pH and relative humidity.

• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.1
• /
• pp.1-9
• /
• 1991

A study was carried out to investigate the composition of rock-forming minerals and mineralogical characteristics of the five major parent rocks in Korea. The identification was done through the analyses of chemical. X-ray diffraction, thermal(DTA, TG), infrared spectroscopic, and microscopic methods. Among these methods, X-ray diffraction was considered to be the most rapid and effective way to identify minerals in the parent rocks. The main rock-forming minerals of the parent rocks were feldspars, quartz, and micas in granite and granite-gneiss, calcite and dolomite in limestone, quartz and calcite in shale, plagioclase and augite in basalt. A small amount of sesquioxides was identified as a accessory mineral by means of DTA from the parent rocks of Weoljeong series(granite) and Cheongsan series(granite-gneiss). The abrasion pH affecting the soil formation ranged from 7.5 to 8.4 in the parent rocks containing ferromagnesian minerals and carbonates. In the granite and granite-gneiss of which the main rock-forming minerals were feldspars and quartz with low content of biotite, the abrasion pH ranged from 6.2 to 6.4. In chemical composition of the parent rocks, Si, AI, and K oxides tented to increase with higher contents of quartz, feldspars, and muscovite, while Fe and Mg oxides with higher content of biotite, chlorite, amphiboles, and augite. Higher ignition loss in limestone and shale resulted in the release of $CO_2$ from calcite and/or dolomite.

• Journal of Conservation Science
• /
• v.32 no.4
• /
• pp.511-520
• /
• 2016

The purpose of this study was to estimate the firing temperature of fired clay brick by applying high temperature X-ray diffraction(XRD) analysis. The clay bricks, which were excavated from a Buddhist temple in Karatepa, Uzbekistan were composed of quartz, plagioclase, alkali feldspar, mica, chlorite, limestone, hornblende, etc. Some clay bricks contained gypsum, which was presumed to have been used to improve the adhesive strength of the brick. Estimating the firing temperature using a geologic thermometer, the UZ-1 sample was identified as being in the quartz, plagioclase, pyroxene series, and the firing temperature was estimated to be $900-1200^{\circ}C$. On the other hand, applying the high temperature XRD method to the UZ-5 sample, it was found that the limestone was destroyed at $1000^{\circ}C$ and the diffraction peak of chlorite was weakened at $1050^{\circ}C$. Moreover, pyroxene series minerals developed at $1050^{\circ}C$ in the reproduction experiment. These results indicate that the clay bricks used in the temple were produced in a kiln that reached a temperature of more than $1000^{\circ}C$. Thus, high temperature XRD analysis can more accurately estimate firing temperatures as compared to the firing temperature mineral identification method and it can be used to determine the creation and extinction temperature range of minerals.

• Economic and Environmental Geology
• /
• v.51 no.6
• /
• pp.473-483
• /
• 2018

Green-blue coloured supergene minerals are covering host rocks along the gallery wall in the Gukjeon mine, a lead - zinc skarn deposit located in Miryang, Gyeongsangnam-do. These minerals have been described as azurite or malachite, but recent study recognized that the green minerals are devilline and blue minerals are Cu-Zn hydrated sulfates, but exact identification and detailed mineral characteristics are also not well known. In this study, we divide green-blue minerals into five groups (GJG) according to their external features and conducted XRD and SEM analyzes in order to identify mineral name and clarify the mineralogical characteristics. GJG-1, a bright bluish green group, consists of brochantite and quartz and GJG-2, a pale green colour with easily crumbly, of schulenbergite and a small amount of gypsum. Although pale blue GJG-3 and glassy lustrous bluish green GJG-4 have the same mineral assemblages with serpierite and gypsum in spite of different colour and luster, gypsum content may control the physical properties. GJG-5 with a gel phase mixture of pale blue and dark blue mineral is comprised of hydrowoodwardite, glaucocerinite, bechererite, serpierite and gypsum. The six green-blue minerals from the Gukjeon mine could be classified by Cu:Zn ratio, (Si + Al) content, Si:Al ratio, and Ca content. The physico-chemical environment of mineral formation is considered to be controlled by the geochemical factors in the surrounding fluid, and it looks forward that the accurate formation environment will be revealed through additional research. This paper gives greater mineralogical significance in the first report of several hydrated sulfate such as serpierite, glaucocerinite and bechererite in Korea. It has also rarely been reported the occurrence of several Cu-Zn hydrated sulfate in the same deposit in the world.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.266-271
• /
• 2004

지리적으로 이격된 마산과 서부산 지역의 불국사 화강암 분포지에서 정량적인 풍화도를 판별하기 위해 화학적 풍화지수와 등급을 산정하였다. 연구를 위해 채취된 시료에 대해 풍화 생성광물 동정, 전암분석, 산침수에 의한 이온용출 시험을 실시하였으며, 풍화지수와 지형적인 요소와 풍화속도를 고려하여 풍화등급들 산정하였다. 분석 결과 동일한 물리적, 광물학적 특성을 가지고 있으나 풍화에 따라 생성되는 점토광물의 종류와 함량에서 차이를 보여주며, 풍화의 진행 경로과 범위는 매우 상이한 결과를 보여 준다. 이러한 결과는 암석의 풍화가 모암의 조건 외에 지형, 지질구조, 기온, 강수량과 같은 환경적인 요소에 밀접하게 관련되어 있는 것을 의미할 뿐만 아니라 풍화도 산정에서 환경적인 요소에 대한 해석이 반드시 요구된다.