• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.63-68
• /
• 2002

본 논문에서는 관통형 고주파 노이즈 필터(noise filter)를 설계하고, 제작하였다. 분포정수형(distributed constant type) 노이즈 필터는 세라믹 다층 구조(multi-layer)를 가지며, 기존의 노이즈 억압 방법인 칩 페라이트 비드, 3단자 커패시터 그리고 집중 정수형(lumped constant type) 노이즈 필터에 비해 신호의 왜곡이 적고, 고주파 노이즈 억압특성이 우수하다. 본 논문에서는 기존의 분포정수형 노이즈 필터에 관통형 via-hole을 삽입하는 새로운 구조를 제안하였다. 제작된 노이즈 필터는 100MHz의 차단 주파수, 700MHz~1700MHz에서 20㏈이상의 감쇠 특성을 나타내었다. 또한, 기존의 노이즈 필터의 단점인 방향성 덴 공정에 대한 민감도를 개선시킴으로써 양산성이 향상되었다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.4
• /
• pp.355-362
• /
• 2020

EFP composed of explosive, charge and liner generally penetrates standoff a target by Monroe effect. Its performance highly depends on penetrator characteristics and flight stability. Penetration ability can be dramatically reduced when the penetrator reaches the target with AOA, even if the penetrator has high kinetic energy and L/D ratio. Therefore, it is important to research not only penetrator characteristics and but also flight stability. In this work, the effect of liner shape on penetrator characteristics was examined using free flight test and numerical tools. It was found that tip velocity of penetrator was increased with decreasing liner thickness. It was also found that thicker liner had higher static margin leading to better flight status.

• Journal of the Korean Institute of Gas
• /
• v.3 no.1
• /
• pp.1-7
• /
• 1999

Fatigue behavior of before-and-after penetration was examined experimentally using surface pre-cracked specimens of aluminium alloy 5083-0. The fatigue crack shape before penetration is almost semicircular, and the measured aspect ratio is larger than the value obtained by calculation using K values proposed by Newman-Raju. It is found that the crack growth behavior on the back side after penetration is unique and can be divided into three stages. By using a crack propagation rule in case of long surface crack, the change in crack shape after penetration can be evaluated quantitatively.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.6
• /
• pp.397-404
• /
• 2019

Linear Shaped Charge (LSC) that is widely used as separation system in aerospace system has to charge lots of explosives due to lack of uniformity. In addition, it is hard to optimize shape of liner and explosives because of manufacturing process. In order to overcome aforementioned drawbacks, Precision Linear Shaped Charge (PLSC) is currently under development. PLSC is made in two steps: prepare liner independently and charge explosive uniformly. In this study, PLSC is designed to have proper amount of explosives and penetration test of PLSC with different stand-off distance from liner to target is conducted to confirm penetration performance. Based on the penetration test results of PLSC, the numerical analysis method using AUTODYN is established and verified. Penetration mechanism and characteristics of PLSC is analyzed from the numerical and experimental results.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.540-542
• /
• 2003

산을 관통하는 터널은 기존의 지하수위를 낮추어 지하수량 및 수질 변화와 함께 주변 식생에 영향을 미칠 수 있다. 본 연구는 서울시 내부 순환도로 건설에 따라 관악산을 관통할 예정인 터널 건설로 인한 지하수 환경변화를 이해하고자 한다. 즉, 현재 산출되는 지하수, 약수 및 지하수 화학특성을 파악하고 지하수 수문 자료와 연계하여 향 후 수질변화 가능성을 예측하고자 한다. 조사 지역에 분포하는 지하수는 지하수위가 대체로 최대 2m 정도에서 최대 20m를 넘지 않으며 일부 관정은 계절에 따라 수온 변화를 보여 지표수와 연계성을 시사한다. 전반적으로 중성에서 약산성을 띄며 이는 화강암과 화강 편마암으로 이루어진 이 지역의 지질특성에 기인한 것으로 생각된다. piper diagram에 도시하였을 경우 지표수는 지하수에 비하여 Na, K 에 비하여 Ca, Mg, Cl, SO$_4$가 우세한 반면 지하수와 약수의 경우 뚜렷한 특성 차이를 보이지 않으며 넓은 영역에 걸친 분포를 보인다.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.12
• /
• pp.51-57
• /
• 2012

In this study, numerical analysis was carried out for both partially penetrated SCP(sand compaction pile) and fully penetrated SCP constructed into the ground. Midas GTS was used as a FEM analysis program, which is widely used in geotechnical engineering. For the analysis, ground displacement, effective stress and pore water pressure at the time both just after embankment on the ground and 365days later were compared and analyzed. As the results, the effect regarding partially penetrated SCP was similar to the effect regarding fully penetrated SCP under the bottom of the center of embankment when considering the safety towards shear failure.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.1
• /
• pp.31-40
• /
• 1992

This paper presents an automatic feature recognition system for recognizing and extracting feature information needed for the process planning input from a 3D CAD system. A given part is modeled by using the AutoCAD and feature information is automatically extracted from the AutoCAD database. The type of parts considered in this study is prismatic parts composed of faces perpendicular to the X, Y, Z axes and the types of features recognized by the proposed system are through steps, blind steps, through slots, blind slots, and pockets. Features are recognized by using the concept of convex points and concave points. Case studies are implemented to evaluate feasibilities of the function of the proposed system. The developed system is programmed by using Turbo Pascal on the IBM PC/AT on which the AutoCAD and the proposed system are implemented.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.2
• /
• pp.187-196
• /
• 2013

CFT structures require a diaphragm to prevent buckling of steel at connections. An outer diaphragm has better concrete filling than a through diaphragm due to a large bore, but due to the larger size than the through diaphragm, it has poorer constructability and cooperation with building equipment. The building structure has a floor slab that was unified with the upper diaphragm, so the outer diaphragm was placed at the upper bound. Moreover, the through diaphragmwas placed at the lower connection to avoid obstruction of the building equipment. The CFT structure with the improved concrete filling showed the same structural behavior as the CFT structure with the use of the same type of diaphragms at the upper and lower connections.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.487-489
• /
• 2004

마이크로 사이즈 공음극 플라즈마 전극에 대한 제작 및 방전 실험을 진행하였다. 방전 전극은 200~500 um의 hole 형상을 제작하였으며 70~850 torr He 분위기에서 방전 실험하였다. 실험 샘플은 막힌 공음극 형상과, 관통된 공음극 두가지 형상을 실험하였다. 마이크로 공음극 플라즈마의 공음극 크기에 따른 결과에서 사이즈가 작을수록 총 전류 값은 낮아지나, 전류 밀도는 증가하였다. 막힌 공음극에서는 양저항 특성을, 관통된 공음극에서는 부저항 결과를 얻었다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.7
• /
• pp.781-786
• /
• 2015

In this paper, we analyzed characteristic of window type current transformer and we performed the optimal design consider to the loss; in order to design the current transformer figured signal of overcurrent warning circuit. The core size of window type current transformer was determined by the secondary coil turns. We analyzed current waveform, which is appeared by the number of coil turns on the core, we made sure the relation of secondary coil turns and load resistance in order to improve the non-sinusoidal wave by the flux saturation of the current transformer core. Additionally, we did improvement of the accuracy and optimal design through the transformation of the inner diameter and the stack length when the outer diameter of core is sustaining.