• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.50.3-50.3
• /
• 2009

지구관측용 광학탑재체를 탑재한 저궤도위성은 내부부품보호를 위해 표면처리와 같은 수동적 기법과 히터동작과 같은 능동적 기법을 함께 사용을 한다. 내부열손실을 막기 위해 위성외부의 거의 모든 부분을 단열재(MLI)로 감싸게 되며, 각 단열재는 견고하게 고정이 된다. 광학탑재체는 구성품의 보호와 최적성능의 영상획득을 위해 다수의 히터가 장착되는데, 각 히터는 가열대상물의 온도를 실시간으로 측정하여 미리 설정된 On/Off 온도를 기준으로 제어가 된다. 궤도상에서 탑재체가 겪게 되는 다양한 궤도열환경 시나리오에 대한 열해석결과를 이용하여 히터의 위치, 용량 및 제어온도가 결정된다. 궤도상 운용 중, 위성을 보호하는 단열재 사이에 미세한 틈이 발생한 가상적인 상황을 가정하여, 탑재체 히터의 임무주기변화와 탑재체 운용에의 영향을 분석한다.

• Proceedings of the KIPE Conference
• /
• 2011.11a
• /
• pp.153-154
• /
• 2011

본 논문은 비대칭 2상 SRM의 센서리스 속도제어를 위한 초기각 검출 및 초기 기동방식과 자속관측기를 적용한 센서리스 제어에서 전동기의 온도 및 파라미터 변동에 의한 자속 오차 성분으로 인해 발생하는 위치 추정오차를 보상하기 위한 새로운 보상기를 제안한다. 제안된 방식은 전압펄스 인가로 초기각을 검출하고 검출된 초기 위치정보를 바탕으로 동일한 전압펄스 인가를 통해 비여자상이 여자상이 되는 회전자 위치를 검출하여 상여자를 교체하는 초기기동을 통해 자속관측기를 적용한 센서리스 제어로 안정적으로 진입하도록 한다. 이 때, 제안된 추정위치 보상기를 통해 추정된 센서리스 위치를 순시적으로 보상한다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.1
• /
• pp.68-73
• /
• 2003

This paper describes a newly developed vector drive system without the speed sensor using theory of a flus observer and based on the field oriented vector control. The new method of speed estimation is presented to operate with the position and magnitude of the secondary flux vector which obtain to the observer md detected current. As the speed of estimation is determined to the flux and the motor constants, this method don't need to adjust the gain of the parameter and is operated simply. On basic the derived theory for vector control, sensorless speed control system for induction motor drive is design and realized. It is determined a controllers gain and observer gain by simulation and the experiment of sensorless vector drive is realized.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.5
• /
• pp.466-476
• /
• 2011

In this paper, a high-performance current control for the single-phase PWM converter under distorted source voltages is proposed using a composite observer. By applying the composite observer, the fundamental and high-order harmonic components of the source voltage and current are extracted without a delay. The extracted fundamental component is used for a phase-lock loop (PLL) system to detect the phase angle of the source voltage. A multi-PR (proportional-resonant) controller is employed to regulate the single-phase line current. The high-order harmonic components of the line current are easily eliminated, resulting in the sinusoidal line current. The simulation and experimental results have verified the validity of the proposed method.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.3
• /
• pp.31-42
• /
• 1985

Thig paper used two feedback sensors, that is, potentiometer and tachometer in order to control DC motor. Also, the state feedback and kalman regular type in the linear system or the state feedback and on-off relay type in the non-linear system are used as control meth-ods for optimal control values. This compared and analyzed the control estimate of tracking angles by the estimate of three branches of methods of position and speed measured, position and speed by PD and position, speed and covariance by an observer.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.2
• /
• pp.57.1-57.1
• /
• 2018

한국우주전파관측망(KVN)을 이루는 각 전파망원경에는 4 주파수 동시관측 시스템을 운영하고 있다. 이 시스템에는 각 주파수별로 우주에서 오는 전파신호 세기를 모니터링하기 위한 전파세기 측정기(Total Radio-Power Detector)를 자체 기술로 설계, 제작하여 운영하고 있다. 전파세기 측정기는 수신되는 전파신호의 변화를 확인하기 위한 장치로써, KVN을 이루는 21m 전파망원경의 수신기로 천체의 전파 신호를 관측할 때 사용한다. 현재, KVN 수신 시스템은 광대역 시스템으로의 성능 향상을 위한 개발을 진행하고 있다. 이에, 개발되는 광대역 수신시스템을 지원하기 위하여, 원격지 컴퓨터에서 모니터링과 원격 제어로 자동화 운용이 가능하도록 광전송 방식의 전파세기 측정기를 새로 개발하고 있다. 이번 발표에서는 진행 중인 개발 내용과 향후 계획을 소개한다.

• Korean Journal of Remote Sensing
• /
• v.30 no.5
• /
• pp.547-557
• /
• 2014

This paper presents a method for designing circular template used in similarity measurement for image registration. Circular template has translation and rotation invariant property, which results in correct matching of control points for image registration under the condition of translation and rotation between reference and sensed images. Circular template consisting of the pixels located on the multiple circumferences of the circles whose radii vary from zero to a certain distance, is converted to two-dimensional Discrete Polar Coordinate Matrix (DPCM), whose elements are the pixels of the circular template. For sensed image, the same type of circular template and DPCM are created by rotating the circular template repeatedly by a certain degree in the range between 0 and 360 degrees and then similarity is calculated using mutual information of the two DPCMs. The best match is determined when the mutual information for each rotation angle at each pixel in search area is maximum. The proposed algorithm was tested using KOMPSAT-2 images acquired at two different times and the results indicate high accurate matching performance under image rotation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.3
• /
• pp.275-280
• /
• 2013

Conventional proportional navigation guidance law is not adequate for missiles with a strapdown seeker, because the strapdown seeker cannot measure line-of-sight rate directly. This paper suggests a guidance loop design method, in which the look angle, measured by the strapdown seeker directly, is controlled to deliver a missile to a target. Basically, the look angle control loop is regarded as an attitude control loop. By using the proposed method, it is possible to shape the midcourse trajectory by choosing the reference look angle properly. The look angle control loop can robustly maintain target lock-on against disturbances because the target is always captured in the field of view of the seeker. The performance of the proposed method is verified via 6-DOF simulations of a true short range tactical missile model.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.1
• /
• pp.13-20
• /
• 2005

This paper has proposed an algorithm for the initial pole position estimation of a permanent magnet linear synchronous motor(PMLSM). The algorithm finds the initial pole position observing the maximum values of a position generated by the new proposed two reference frames for the same force input. So, the proposed algorithm does not utilize the motor parameters and is insensitive to them. Moreover, the proposed algorithm is easily realized because the proposed method is just using PI controller

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.1
• /
• pp.36-48
• /
• 1990

A new control method for robust position control of brushless dc motor is presented. The model of brushless dc motor is approximately linearized by field-orentation method, and it is shown that augmented state variable feedback can be applied to this system. In addition, robustness is obtained without any change of overall system response. Load disturbance is detected by 0-observer of unknown and inaccessible input, and is compensated by feedforward which has fast response. Overall system is controlled by using the MC68000 microprocessor, and the performance of the proposed control algorithm is verified by the results of simulation and experiment.