• Proceedings of KOSOMES biannual meeting
• /
• 2018.06a
• /
• pp.82-82
• /
• 2018

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.3
• /
• pp.40-51
• /
• 2021

MLS (Mobile Laser Scanning) which is a scanning method done by moving the LiDAR (Light Detection and Ranging) is widely employed to capture indoor PCD (Point Cloud Data) for floor plan generation in the AEC (Architecture, Engineering, and Construction) industry. The movement and rotation of LiDAR in the scanning phase cause deformation (i.e. skew) of PCD and impose a significant impact on quality of output. Thus, a de-skewing method is required to increase the accuracy of geometric representation. De-skewing methods which use position and pose information of LiDAR collected by IMU (Inertial Measurement Unit) have been mainly developed to refine the PCD. However, the existing methods have limitations on de-skewing PCD without IMU. In this study, a novel algorithm for de-skewing 2D PCD captured from MLS without IMU is presented. The algorithm de-skews PCD using scan matching between points captured from adjacent scan positions. Based on the comparison of the deskewed floor plan with the benchmark derived from TLS (Terrestrial Laser Scanning), the performance of proposed algorithm is verified by reducing the average mismatched area 49.82%. The result of this study shows that the accurate floor plan is generated by the de-skewing algorithm without IMU.

• Current Research on Agriculture and Life Sciences
• /
• v.32 no.3
• /
• pp.159-163
• /
• 2014

Agricultural unmanned helicopters have become a new paradigm for aerial application. Yet, such agricultural helicopters require easy and affordable attitude control systems. Therefore, this study presents an affordable attitude measurement system using a DCM (direction cosine matrix) algorithm that would be applied to agricultural unmanned helicopters. An IMU using a low-cost MEMS and an algorithm to estimate the attitude of the helicopter were applied in a gimbals structure to evaluate the accuracy of the attitude measurements. The estimation errors in the attitude were determined in comparison with the true angles determined by absolute position encoders. The DCM algorithm and sensors showed an accuracy of about 1.1% for the roll and pitch angle estimation. However, the accuracy of the yaw angle estimation at 3.7% was relatively larger. Such errors may be due to the magnetic field of the stepping motor and encoder system. Notwithstanding, since the intrinsic behavior of the agricultural helicopter remains steady, the determination of attitude would be reliable and practical.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.20 no.2
• /
• pp.18-25
• /
• 2012

The availability of the GPS signal has been expanded greatly in the field of society overall through the development and construction of the GNSS(Global Navigation Satellite System). Furthermore, in the military, aviation and field of space, the GPS signal is applied widely through the combination of INS consisting of gyroscope and accelerometer, IMU, AHRS with the addition of magnetic sensor. Particularly, the performance of these equipments or sensors is very important with GPS and PAR(Precision Approach Radar) in the flight control of the aircraft. This paper deals with MATLAB simulation and ROLSO(Reduced Order Luenberger State Observer) design to reduce the load of system and realize the stable lateral direction approach control in an appropriate time for reduction of the horizontal error which is importantly considered while an aircraft lands instead of the FOLSO(Full Order Luenberger State Observer) using all measurement values. Consequently, ROLSO is expected to be used for the aircraft's attitude control in the aircraft landing causing the burden to the pilots.

• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.379-385
• /
• 2007

관성 센서는 외부 장치의 도움 없이 3차원 공간상에서 움직임 측정이 가능하다. 최근 MEMS 기술의 발달로 소형 저가 관성 센서(가속도 센서 혹은 각속도 센서) 제작이 가능해져 관성 센서를 소형 휴대 기기에 내장하여 사용자의 움직임을 감지하거나 의도 파악하는 연구가 진행되고 있다. 본 연구에서는 관성 센서가 내장된 휴대 기기를 이용하여 3차원 공간상에서 6가지 위치에 따라서 각기 다른 6가지 소리를 발생하는 가상의 멀티 타악기 시스템을 제안한다. 즉, 휴대 기기를 상/하로 흔들면 가상 타악기의 타점 위치에 왔을 때 비트 음을 발생하고, 6개의 다른 위치를 구분하여 다른 타점의 위치에서 휴대 기기를 흔들면 각각 그 위치와 미리 지정된 소리가 발생하도록 하였다. 이러한 가상의 멀티 타악기 시스템을 위해서 3차원 공간상에서 실시간으로 사용자의 움직임을 감지하고 휴대 기기의 위치를 파악하는 것이 필요하다. 저가의 관성 센서를 이용하여 사용자가 휴대 기기를 움직이는 동작이 있는 상황에서 실시간으로 휴대 기기의 위치를 추정하는 것은 쉽지 않지만 본 연구에서는 다양한 사용자의 움직임 동작 분석을 통하여 사용자가 가상의 멀티 타악기를 상/하로 흔드는 동작을 감지하고 다른 위치로 이동하는 동작을 구분하였다. 개발된 동작 감지 알고리즘과 위치 구분 알고리즘을 휴대 기기에 적용되어 실제로 가상의 타악기 시스템을 구현하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.1
• /
• pp.36-45
• /
• 2017

Abstract It is necessary to verify the properties of an inertial measurement unit in the flight environment before applying to military applications. In this paper, we presented a new approach to verify an inertial measurement unit(IMU) in regard to the performance and the robustness in flight environments for the high-dynamics vehicle systems. We proposed two methods for verification of an IMU. We confirmed normal operation of an IMU and properties in flight environment by using direct comparison method. And we proposed real time multi-navigation system to complement the first method. The proposed method made it possible to compare navigation result at the same time. Therefore, it is easy to analyze the performance of an inertial navigation system and robustness during the vehicle flight. To verify the proposed method, we carried out a flight test as well as an experimental test of flight vibration on the ground. As a result of the experiment, we confirmed flight environment properties of an IMU. Therefore, we shows that the proposed method can serve the reliability improvement of IMU.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.2
• /
• pp.134-141
• /
• 2013

This paper explores a real-time system implementation to couple tightly StrapDown Inertial Navigation System(SDINS) and Global Positioning System(GPS) mounted on the aircraft. When implementing the SDINS/GPS coupled system in real-time processor, we have to deliberate SDINS's unique characteristics based on the ring laser gyro, and besides, lever-arm, measurements, and error compensation method. The novel modeling method is applied to system the misalignment error term of gyro to estimate the cumulative heading attitude errors while the aircraft banking to turn repeatedly. Captive Flight Test results show that the proposed modeling strategy has good performance.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.5
• /
• pp.74-80
• /
• 2006

GPS, which has been opened to the public since the 1980's, uses the C/A code time of arrival to estimate the position, and measures the carrier doppler frequency to estimate the velocity. In development from the 1990's, DGPS has improved position accuracy by eliminating common errors and CDGPS has achieved cm-level position accuracy using carrier phase. In this paper, a modified LSAST ambiguity resolution method for CDGPS is proposed to improve reliability and computational efficiency. Also the test results of cm level relative positioning of a moving vehicle using single frequency GPS receivers are compared to INS position. This research result can be widely used for the development of high precision INS, unmanned autonomous driving, survey and mapping, etc.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.11
• /
• pp.1031-1038
• /
• 2016

In the UAVs, the position error of the inertial navigation system is constantly increased when global positioning system goes wrong due to interference. It makes impossible to ensure mission and flight safety. If the data-link system provide the position of the UAV for inertial navigation system periodically, then the UAV may operate normally under malfunction of the global positioning system. In this paper, we introduce an algorithm for estimating the position of the UAV using the monopulse tracking and distance measurement of the line-of-sight data-link system. Also, we propose a method to improve the performance of position estimation. And we assured ourselves that this method can be applied in the UAVs.

• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.81-82
• /
• 2014

산업계에서 많이 사용되는 고압 전동기는 일반적으로 관성이 크므로, 인버터 입력 전원의 고장 또는 정전 사고 후 복전 시, 전동기를 멈추고 재기동하기까지 오랜시간이 걸린다. 이러한 재기동 시간을 줄이기 위해, 고압 전동기를 멈추지 않고, 자유 회전 상태에서 재기동이 가능한 플라잉 스타트(flying start) 기능이 요구된다. 본 논문에서는 전압 측정 장치를 사용한 플라잉 스타트 방법을 제안한다. 제안한 방법은 전압 측정 장치를 통해 측정된 전동기의 잔류 전압 정보를 사용하여 전압의 크기, 주파수, 위상을 보상한다. 자사의 고압 인버터를 사용하여 실험을 통해 그 유효성을 검증하였다.