• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.161-165
• /
• 2011

본 논문에서는 고유진동수 조절이 가능한 새로운 형태의 액체댐퍼를 개발하였다. 동조댐퍼는 구조물의 설계단계에서 응답평가를 통해 필요성이 요구된다. 건물은 설계단계에서 고유진동수와 시공 후 고유진동수가 상이하다. 액체댐퍼의 형태는 설계단계에서 건물의 고유진동수를 동조시킬 수 있도록 설계되기 때문에 고유진동수가 고정이 될 수 있다. 본 연구에서는 제안한 댐퍼의 전체적인 형태는 기존의 Liquid Column Vibration Absorber(LCVA)와 같다. 기존의 LCVA는 시공 후 건물의 고유진동수에 동조시키기 위해 물높이를 조절하나 층고 때문에 제한이 있다. 우리가 제안한 새로운 형태의 액체댐퍼는 물높이 조절 뿐 아니라 수직관의 면적을 조절하여 고유진동수를 조절 할 수 있도록 개발하였다. LCVA의 수직관을 일정한 면적의 독립된 셀로 나누었으며 이 셀을 각각 밀폐시킬 수 있도록 하였다. 밀폐된 셀 안으로는 공기압력에 의해 물이 차지 않고 차 있는 물도 움직이지 않게 된다. 밀폐된 셀의 개수를 조정하여 수직관의 면적이 조절하여 고유진동수를 변화시킬 수 있다. 제작된 액체댐퍼의 밀폐된 셀 개수를 조절하여 진동대 실험을 통해 댐퍼의 고유진동수를 파악하였다. 실험으로 나온 고유진동수와 이론적으로 산정한 고유진동수를 비교하여 댐퍼의 사용성을 평가하였다. 개발된 액체 댐퍼의 수직관의 면적 조절을 통해 고유진동수 조절이 용이하여 실제로 사용이 가능함을 확인할 수 있었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.5
• /
• pp.128-135
• /
• 2021

Thin-walled tubes have been widely used as energy absorbing devices because they are light and have high energy-absorption efficiency. However, the downside is that conventional thin-walled tubes usually exhibit an excessive initial peak crushing force (IPCF) and a large fluctuation in the load-displacement curve, and thus lack stability as energy absorbing devices. Corrugated tubes were introduced to reduce IPCF and to increase the stability of collision energy-absorbing devices. Since the performance of corrugated tubes is highly influence by geometry, design optimization methods can be utilized to optimize the performance of corrugated tubes. In this paper, we utilize shape design optimization based on an adaptive surrogate model for crashworthiness analysis. The amplitude and wavelength of the corrugation, as well as curvature changes in the features, are the design variables. A morphing methodology is adopted to perform shape design parameterization. Through numerical examples, we compare optimal design results based on the adaptive surrogate model, with optimal results based on conventional surrogate models, and we show that direct optimal design methods produce more efficient results.

• 대한치과보철학회:학술대회논문집
• /
• 1993.12a
• /
• pp.45-45
• /
• 1993

• Korean Architects
• /
• no.7 s.351
• /
• pp.117-120
• /
• 1998

• Proceedings of the Korea Water Resources Association Conference
• /
• 2002.02a
• /
• pp.203-222
• /
• 2002

• The Science & Technology
• /
• v.15 no.1 s.152
• /
• pp.22-23
• /
• 1982

• Korean Architects
• /
• no.5 s.301
• /
• pp.90-103
• /
• 1994

• Journal of Korea Water Resources Association
• /
• v.35 no.6
• /
• pp.665-675
• /
• 2002

It is very closely related with the reliability of the pipe network to predict pipe burst and diminish burst effect in water distribution system. Most of the engineers have not consider pipe layout and the effect of pipe burst in conservative pipe network design. In this study, The effect of pipe burst in the network is analyzed with respect to pipe network geometric topology and the method of increasing the system reliability is presented by reducing pipe-burst effect. In existing pipe system, it is only designed to the closed loop system but in case of each pipe burst, it cannot transmit appropriate water to consumers and occurs severe hydraulic head drop in many nodes. The techniques developed in this study allow proper pipe diameter and pipe layout to pipe system through the analysis of pipe-burst effect. Thus, when each pipe is bursted, pipe system is prevented from severe pressure head drop in demand nodes and can supply stable flowrate to consumer.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.6
• /
• pp.499-503
• /
• 2016

Dual fuel engines are suitable for stricter regulations as they significantly decrease exhaust gas output. Hence, research and development of double wall bellows for dual fuel engines is important. In this study, optimum forming methods and welding conditions were derived to develop double wall bellows made of austenite stainless steel. The reliability of the prototypes was ensured by various performance evaluations. In this study, the buckling load and bellows stress were obtained by structural design, buckling, and stress analysis to design optimum bellows. As a result, the buckling load in the embossing shape of bellows increased by approximately 1.6 times, and no buckling and squirming occurred at 30.0 bar, which was twice that of the maximum design pressure.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.8
• /
• pp.73-82
• /
• 2010

The GFRP(Glass-Fiber Reinforced Plastic) pipe is designed to behave safely against the external forces and to secure stability of deformation and settlements of pipe, since it is laid under the ground. In this study, the evaluation for the pressure stability was carried out by performing the laboratory experiments to figure out the mechanical properties of Glass-Fiber Reinforced Plastic pipe, take a theoretical approach, and suggest the mechanical properties necessary for the analysis and design of GFRP. Numerical analysis is also conducted to evaluate on the field application through the comparison concerning relations between deformation and differential settlement in the GFRP and hume pipes when all and half sections are under the surcharge load.