Abstract
Dual fuel engines are suitable for stricter regulations as they significantly decrease exhaust gas output. Hence, research and development of double wall bellows for dual fuel engines is important. In this study, optimum forming methods and welding conditions were derived to develop double wall bellows made of austenite stainless steel. The reliability of the prototypes was ensured by various performance evaluations. In this study, the buckling load and bellows stress were obtained by structural design, buckling, and stress analysis to design optimum bellows. As a result, the buckling load in the embossing shape of bellows increased by approximately 1.6 times, and no buckling and squirming occurred at 30.0 bar, which was twice that of the maximum design pressure.
배기가스의 배출을 현저하게 저감시켜 강화된 환경규제에 적합한 DF 엔진의 고압 가연성 가스를 공급하기 위한 이중관 가스 벨로우즈의 연구개발에 대한 필요성이 대두되고 있다. 본 연구에서는 최적화된 이중관 벨로우즈의 개발을 위한 것으로, 내식성재료인 오스테나이트계 스테인리스강에 대하여 이중관으로 벨로우즈화하는 성형방법과 최적화된 용접 조건을 도출하여 다양한 성능평가를 통해 생산된 시제품의 신뢰성을 확보하기 위한 연구를 수행하였다. 본 연구의 제1보에서는 최적화된 벨로우즈를 설계하기 위하여 구조설계, 좌굴해석 및 응력해석을 통해 좌굴 발생 하중 및 벨로우즈 응력을 해석하였다. 그 결과 엠보싱 형상을 가진 벨로우즈의 경우 좌굴 발생 하중이 약 1.6배 증가하였으며, 최대 설계압력보다 2배인 30.0 bar에서 어떠한 좌굴 및 스컴이 발생하지 않는다는 것을 확인하였다.