• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.1
• /
• pp.110-117
• /
• 2012

This study was performed to determine light-adaptability under indoor lighting for Korean wild Daphniphyllum macropodum, and to provide an introduction plan for indoor spaces of landscape architecture. The experimental plants, Daphniphyllum macropodum were purchased from a farmhouse in Jejudo as anannualplant, and it was acclimatized in the glass-green house of the general farm of Gyeongnam National University of Science and Technology for40 days. The experiment was performed from February 15, 2010 to November 15, 2010. First, in the case of the fluorescent lamp, the growth and development condition was poor because the plants withered, or the leaves fell off under the 100lux to 500lux, but the condition under 1,000lux was good In the aspects of the number of leaves, form of the tree, photosynthesis rate in its body, and the value of sight, the best light intensity for the growth condition was under the 1,000lux. Second, in the case of the LED light, the growth and development condition was poor because the plants withered, or the leaves fell off under 100lux to 1,000lux, but the smooth growth and development was done under a more light intensity. The best intensity for the growth condition was under 2,000lux. Third, in the case of the three-wave light, the withering was serious by 1,000lux, and the growth and development was the worst amongst the four introduced lighting systems, therefore, growth under the three-wave light was incongruous. The best intensity for the growth condition was under 2,000lux. Fourth, in the case of the optical fiver, the withering did not existed under 100lux and growth was possible. The growth and development was the amongst in the four introduced lighting systems. Generally, in the more light intensity, more growth was observed, but the value of sight was higher under 1,000lux than under 2,000lux because the falling rate of leaves and the form of the tree was stable. The most effective light was under 1,000lux due to the high photosynthesis in its body. When Daphniphyllum macropodum is introduced into the indoor landscaping space considering the light, the optical fiber, fluorescent lamp, and LED light are suitable to introduce. The three-wave light is unfit. The most proper light intensity by the light source, in the case of the optical fiber, and fluorescent lamp, is 1,000lux, and, in the case of LED light, is 2,000lux. The wild Daphniphyllum macropodum is the species of tree to substitute the Schefflera actinophylla which is the introduced species, and it is expected to be use as the central tree in indoor spaces.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.4
• /
• pp.479-488
• /
• 2002

In recent years the amount of digital video used has risen dramatically to keep pace with the increasing use of the Internet and consequently an automated method is needed for indexing digital video databases. Textual information, both superimposed and embedded scene texts, appearing in a digital video can be a crucial clue for helping the video indexing. In this paper, a new method is presented to extract both superimposed and embedded scene texts in a freeze-frame of news video. The algorithm is summarized in the following three steps. For the first step, a color image is converted into a gray-level image and applies contrast stretching to enhance the contrast of the input image. Then, a modified local adaptive thresholding is applied to the contrast-stretched image. The second step is divided into three processes: eliminating text-like components by applying erosion, dilation, and (OpenClose+CloseOpen)/2 morphological operations, maintaining text components using (OpenClose+CloseOpen)/2 operation with a new Geo-correction method, and subtracting two result images for eliminating false-positive components further. In the third filtering step, the characteristics of each component such as the ratio of the number of pixels in each candidate component to the number of its boundary pixels and the ratio of the minor to the major axis of each bounding box are used. Acceptable results have been obtained using the proposed method on 300 news images with a recognition rate of 93.6%. Also, my method indicates a good performance on all the various kinds of images by adjusting the size of the structuring element.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.10
• /
• pp.1395-1401
• /
• 2012

This study investigated the cognition-related effects on antioxidant activities, ${\gamma}$-aminobutyric acid (GABA) contents, and AChE inhibitory activities in ethanol extracts from Zingiber officinale Rosc. (Korea), Curcuma longa L. (Korea), Curcuma longa L. (Myanmar), and Curcuma aromatica Salisb. (India). These extracts were investigated to determine the relationships among total polyphenols as well as DPPH and ABTS radical scavenging activities, GABA contents, and acetylcholinestrase (AChE) inhibitory activity. For the results, C. longa L. from Myanmar exhibited the highest contents of curcumin (97.1 ${\mu}g/mg$), total polyphenols (98.4 ${\mu}g/mg$), and GABA (1.31 ${\mu}g/mg$), as well as the strongest radical scavenging activities and AChE inhibitory activity. In addition, C. aromatica Salisb from India, which had the highest total polyphenol content (98.4 ${\mu}g/mg$) and strongest radical scavenging activities, exhibited relatively high AChE inhibitory activity similar to that of C. longa L. from Myanmar. On the other hand, Z. officinale Rosc. and C. longa L. from Korea showed low contents of curcumin (12.2 ${\mu}g/mg$) and polyphenols (85.7 ${\mu}g/mg$), as well as low AChE inhibitory activities. However, we could detect 1.11 ${\mu}g/mg$ of GABA in these extracts, which was similar to that of C. longa L. from Myanmar. Therefore, GABA content was not correlated with AChE inhibitory activity. Based on the results, AChE inhibitory activity is highly correlated with polyphenol contents in Zingibearceae family. Overall, among the Zingiberaceae tested, C. longa L. from Myanmar might be a strong candidate as a cognitive-enhancing ingredient.

• Science of Emotion and Sensibility
• /
• v.17 no.3
• /
• pp.129-142
• /
• 2014

Due to the increase of the aged population and population of the disabled today, there is a growing demand for rehabilitation medical instruments. Furthermore, there is a growing demand for evaluation indices for services that should be provided for uses of the rehabilitation medical instruments. In order to evaluate rehabilitation medical instrument designs in this study, the basic index for design evaluations shall be identified to search for assessment plans. Through this, new evaluation indices will be deduced through discussions and analysis of rehabilitation medical experts, biomedical engineers, and designers. The results of this study are summarized as follows. First, the existing design evaluation indices were collected and analyzed to construct 10 rehabilitation medical instrument design evaluation indices and 44 sub-evaluation items. These will be important evaluation standards for designing rehabilitation medical instruments in the future. Second, the design evaluation indices that must be taken into consideration when developing health care rehabilitation medical instruments are the 10 design evaluation indices of usability, cognition, safety, learning, motility, durability, economic feasibility, space, aesthetics and environmental aspects. Third, design evaluation indices of environment, space, cognition, usability, economic feasibility and aesthetics are indices that must be taken into consideration for product design, while learning, safety, motility and durability are factors that must be given special consideration for rehabilitation medical instrument design evaluation indices. Fourth, if existing product design evaluation indices placed importance on environment, space, cognition, usability, economic feasibility and aesthetics of products for design evaluation indices, rehabilitation medical instrument design evaluation indices placed importance on learning, safety, motility and durability on top of usability and economic feasibility, which are the differences between the design evaluation indices of rehabilitation medical instrument and other product designs. The 10 rehabilitation medical device design evaluation indices and 44 sub-evaluation items were carried out in this study. This research is only on the overall rehabilitation medical device design evaluation indices. In future research, the evaluation indices will be applied in the actual rehabilitation medical design device through production of prototypes, while making revisions and supplementations where necessary.

• Analytical Science and Technology
• /
• v.17 no.6
• /
• pp.496-513
• /
• 2004

This study was carried out to evaluate the performance of sampling and analytical methodology used for the measurement of toxic volatile organic compounds (VOCs) in the ambient air. VOCs were determined by the adsorbent tube sampling and automatic thermal desorption coupled with GC/MSD analysis. Target analytes were 33 compounds including major aromatic compounds such as BTEX, and halogenated compounds. The methodology was investigated with a wide range of different adsorbents which are commercially available and have been frequently adopted for the VOC measurement. A total of 10 adsorbents were tested in this study: 6 carbon-based adsorbents such as Carbotrap, Carbopack B, Carbosieve S-III, Carboxen 1000, Carbotrap C, Activated Charcoal; and 4 polymer-based adsorbents including Tenax, Porapak Q, Chromosorb 102, and Chromosorb 106. The sampling performance was evaluated with respect to the sampling capacity of VOCs with single-adsorbent and multiple-adsorbents methods for standard samples and field samples. As a result, the best adsorbents for single-adsorbent method in the sampling of toxic organic compounds (including benzene, toluene, xylenes etc.) appeared to be Carbotrap, Carbopack B and Tenax TA. On the other hand, Chromosorb 102, Chromosorb 106 and Porapak Q were found to be unsuitable adsorbents for VOC measurement based on thermal desorption method. Multi-adsorbent packings were evaluated with 4 carbon-based adsorbents, which classified by 3 combination sets of double adsorbents and 2 combination sets of triple adsorbents. The results indicated that the most suitable combination for toixc VOC measurements is Carbotrap C with Carbotrap. Multi-sorbents tubes packed with a strong adsorbent such as Carbosieve S-III or Carboxen 1000 were found to be relatively unsuitable for several compounds, not only owing to the effect of migration of adsorbed compounds from weaker adsorbent to stronger adsorbent, but to hydrophobic nature of the adsorbents. Therefore, it should be addressed that selection of a proper adsorbent (or combination of multi sorbents) is extremely important to obtain reliable data for the concentrations of toxic VOCs in indoor and outdoor environments.

• Analytical Science and Technology
• /
• v.29 no.4
• /
• pp.170-178
• /
• 2016

Accuracy and precision of ID methods for different spike isotopes of ⁷⁶Se, ⁷⁷Se, and ⁷⁸Se were compared for the analysis of Selenium using quadrupole ICP/MS equipped with Octopole reaction cell. From the analysis of Se inorganic standard solution, all of three spikes showed less than 1 % error and 1 % RSD for both short-term (a day) and long-term (several months) periods. They showed similar results with each other and ⁷⁸Se showed was a bit better than ⁷⁶Se and ⁷⁷Se. However, different spikes showed different results when NIST SRM 1568a and SRM 2967 were analyzed because of the several interferences on the m/z measured and calculated. Interferences due to the generation of SeH from ORC was considered as well as As and Br in matrix. The results showed similar accuracy and precisions against SRM 1568a, which has a simple background matrix, for all three spikes and the recovery rate was about 80% with steadiness. The %RSD was a bit higher than inorganic standard (1.8 %, 8.6 %, and 6.3 % for ⁷⁸Se, ⁷⁶Se and ⁷⁷Se, respectively) but low enough to conclude that this experiment is reliable. However, mussel tissue has a complex matrix showed inaccurate results in case of ⁷⁸Se isotope spike (over 100 % RSD). ⁷⁶Se and ⁷⁷Se showd relatively good results of around 98.6 % and 104.2 % recovery rate. The errors were less than 5 % but the precision was a bit higher value of 15 % RSD. This clearly shows that Br interferences are so large that a simple mathematical calibration is not enough for a complex-matrixed sample. In conclusion, all three spikes show similar results when matrix is simple. However, ⁷⁸Se should be avoided when large amount of Br exists in matrix. Either ⁷⁶Se or ⁷⁷Se would provide accurate results.

• The Korean Journal of Pesticide Science
• /
• v.7 no.3
• /
• pp.176-181
• /
• 2003

The leaching behaviour of [aniline-$^{14}C$]mefenacet in soil was investigated using glass columns (5 cm I.D. $\times$ 30 cm. H) packed with two types of soils with different physicochemical properties. $^{14}C$-Mefenacet (8.33 kBq) and mefenacet (in total, 1.05 mg/kg) were treated onto soil columns and rice plants (Oryza sativa L.) were grown for 17 weeks on these columns. Leachates from the columns were collected at the rate of 122.5 mL per week. $^{14}C$-Activities leached from soil A (OM, 3.1%; CEC, 86 mmol(+)/kg; texture, loam) columns with and without rice plants were 1.95 and 4.19% of the originally applied, whereas those from soil B (OM, 1.3%; CEC, 71 mmol(+)/kg; texture, loam) were 2.69 and 7.05%, respectively. These results indicated that larger amounts of $^{14}C$ were percolated from soil B with less organic matter and from the columns without vegetation. $^{14}C$-Activities absorbed by rice plants from soil A and B were 8.95 and 8.47%, respectively, most of which remained in the root and shoot excluding unhulled grains and ears without grains. $62\sim73%$ of the originally applied $^{14}C$ remained in the depth of $0\sim5cm$ in soil. The mass balance indicated that the losses by volatilization and/or mineralization amounted to $3.4\sim9.2%$ of the originally applied. $^{14}C$-Radioactivities in the aqueous phase of the leachates ranged from 59.4 to 97.7% of the radioactivities in leachates, showing the fast transformation of mefenacet to the polar metabolites.

• The Korean Journal of Pesticide Science
• /
• v.10 no.4
• /
• pp.313-319
• /
• 2006

Two hundred bacterial strains were isolated from the soil around healthy tomato plants in a polyvinyl house, where most of the other plants showed bacterial wilt symptoms. The strains were screened in vitro for their antibacterial activity. Among them, a strain, KPB3 showed strong bactericidal activity against bacterial wilt pathogen, Ralstonia solanacearum. The strain KPB3 was identified using physiological and biochemical tests, and 16S rRNA analyses. Based on these tests, the strain was found to be closer to genus Paenibacillus. To control the bacterial wilt caused by R. solanacearum, greenhouse experiments were conducted to determine the effectiveness of the Paenibacillus strain KPB3. Drench application of this strain ($4{\times}10^8$ CFU $mL^{-1}$) into the pots containing tomato plants, post-inoculated with the pathogen, R. solanacearum could drastically reduce the disease severity, compared to the non-treated plants. To evaluate effectiveness of this strain under field conditions, experiments were carried out in polyvinyl houses infested with R. solanacearum, during spring and autumn of the year 2006. It was observed that, during spring, bacterial wilt was more prevalent compared to the autumn. During spring, 50.9% disease incidences occurred in non-treated controls, while, Paenibacillus strain KPB3 treated plants showed 24.6% disease incidences. Similarly, during autumn, around 17.2% plants were infected with bacterial wilt in non- treated polyvinyl houses, compared to the Paenibacillus strain KPB3 treated plants, which showed 7.0% disease incidences. These results demonstrated that, Paenibacillus strain KPB3 is a potential biological control agent against bacterial wilt caused by R. solanacearum, effective under greenhouse as well as field conditions. This is the first report showing biocontrol of R. solanacearum using a Paenibacillus spp. under field conditions.

• The Korean Journal of Pesticide Science
• /
• v.4 no.3
• /
• pp.82-88
• /
• 2000

The objective of this study was to determine if wood vinegar of Quercus mongolica Fisch has herbicidal activity. Growth of plants, such as barnyard grass (Echinochloa crus-gulli P. Beauv), quackgrass (Agropyron smithii RYDB), canola (Brassica napus L.), velvetleaf (Abutilon avicennae), indian jointvetch (Aeschynomene indica), and common sorghum (Sorghum bicolor) grown on agar batch treated with 0.01% wood vinegar were similar to that of plant without wood vinegar. The growth of such plants, however, reduced at $0.1{\sim}1%$ concentrations, and inhibited totally at >5% concentration. In greenhouse study, soil-applied wood vinegar did not inhibit tile growth of canola, barnyard grass, large crabgrass, and Abutilon avicennae even at the highest concentration, 80L $80L^{-1}\;10a^{-1}$, while foliar-applied wood vinegar did inhibit the growth of plants at higher than 40L $80L^{-1}\;10a^{-1}$. Growth of canola, barnyard grass, large crabgrass, and Abutilon avicennae treated with wood vinegar (80L $80L^{-1}\;10a^{-1}$) was reduced by 71, 46, 24, and 47%, respectively. In field experiment conducted at Chunchon and Taebeck, biomass of weeds treated with wood vinegar at less than 40L $80L^{-1}\;10a^{-1}$ were close to that of weeds treated without wood vinegar, while biomass of weeds at 80L $80L^{-1}\;10a^{-1}$ was reduced by 34-36%, compared to that of control, at both sites. However, the herbicidal activity of wood vinegar was much lower than that of glyphosate. Results in this study show that wood vinegar of Quercus mongolica Fisch has herbicidal activity, although the herbicidal activity was lower than that of glyphosate, a commercial herbicide.

• The Korean Journal of Pesticide Science
• /
• v.4 no.3
• /
• pp.19-26
• /
• 2000

In order to select potent bioactive isolates, 70 Fusarium isolates obtained from soil and 21 plant species were screened by antifungal, insecticidal, herbicidal, and duckweed bioassays after culturing in potato dextrose broth and rice solid media. Eight (11.4%) of the 70 liquid broth cultures showed disease-controlling activities more than 80% against at least one of the 6 plant diseases tested. Fusarium sp. FO-68 isolate exhibited the most potent antifungal activity; it controlled rice blast, wheat leaf rust, and barley powdery mildew with control values more than 95%. Out of 70 solid cultures, 21 (30.0%) controlled at least one plant disease more than 80% and F. equiseti FO-68 isolate showed disease-controlling activities more than 95% against 3 plant diseases such as rice blast, tomato late blight, and wheat leaf rust. As for tile insecticidal activities, 2 liquid and 1 solid cultures showed potent insecticidal activities against pest insects more than 80%, Liquid cultures of F. oxysporum FO-61 and Fusarium sp. FO-80 isolates exhibited insecticidal activities more than 80% against green peach aphid and diamondback moth, respectively. The solid culture of Fusarium sp. FO-510 isolate had 80% insecticidal activity against green peach aphid. However, none of liquid and solid cultures of the 70 Fusarium isolates showed potent herbicidal activities against 10 upland weeds. As the results of duckweed assay, 3 liquid cultures showed 70% growth inhibitory activity at concentrations less than 1.25% of culture supernatants and 9 solid cultures had a potent inhibitory activity against duckweed growth. On the other hand, there was a significant correlation between antifungal activities and herbicidal activities against duckweed of both liquid and solid cultures of tile 70 Fusarium isolates.