• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1414-1415
• /
• 2008

본 논문에서는 고출력 극초단파(High Power Microwave)가 쏘아지는 대상이 방어장비를 갖추고 있을 때 외부대상이 어떤 영향을 받는지를 규명하는데 목적이 있다. 입력펄스를 변조(modulation)시켜 저지대역(Stop Band) 주파수 대역에 맞추고, 펄스(Pulse)를 저대역 통과 필터의 저지대역에 통과시킨다. 이때 출력펄스의 응답(response)을 시간영역(Time-domain)에서 분석하여 정상상태(steady state)보다는 과도응답(Transient Response)을 확인하는 것을 제안한다. 이 방법은 저지대역의 파형이 필터를 통과해도 과도응답 때문에 필터가 제 역할을 하지 못한다는 이론을 규명한다. 이 이론은 고출력 극초단파가 외부대상에 미치는 영향에 있어서 전자파를 방어하려고 하여도 과도응답 상태 응답 때문에 타격을 받을 수 있다는 것을 규명한다.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1975.07a
• /
• pp.110.3-110
• /
• 1975

환경인자로써 배양액의 희석속도와 기본기질의 농도를 변화시킨 과도상태에서의 yeast의 대사기능의 면화를 고찰하고 과도응답을 해석하였다. 그 결과 기질의 잔존농도가 충분할때는 응답이 늦었으며 또 희석속도가 클수록 새로운 정상상태에 도달하는 시간이 길었다.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2007.06a
• /
• pp.29-33
• /
• 2007

최근의 반도체/display 관련 생산장비 및 검사장비들이 대형화/고속화 되어감에 따라 과거 stepping 방식에서 scanning 방식으로 전환된 장비들이 공정 상에 발생하는 과도응답 형태의 진동으로 인하여 제품 수율의 저하와 생산 효율의 감소를 가져오고 있다. 이러한 과도응답의 진동은 장비 자체의 가진력으로부터 발생하므로 건물 구조의 동강성 증대 방안이나 고효율의 방진 시스템 적용으로는 한계를 가지고 있다. 본 논문에서는 smart 재료인 MR유체를 이용한 MR damper를 이용하여 방진효율을 유지하면서 과도응답의 진동을 제어하기 위한 반 능동제어 방식의 방진/제진 시스템을 구성하였으며, 시스템 해석과 제어 시스템의 구성을 위하여 6자유도 강체 진동에 대한 운동방정식을 고려하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.3
• /
• pp.289-297
• /
• 2011

The explicit finite element method is an essential tool for solving large problems with severe nonlinear characteristics, but its results can be difficult to interpret. In particular, it can be impossible to evaluate its acceleration responses because of severe discontinuity, extreme noise or aliasing. We suggest a new post-processing method for transient responses and their response spectra. We propose smoothing methods using a Gaussian kernel without in depth knowledge of the complex frequency characteristics; such methods are successfully used in the filtering of digital signals. This smoothing can be done by measuring the velocity results and monitoring the response spectra. Gaussian kernel smoothing gives a better smoothness and representation of the peak values than other approaches do. The floor response spectra can be derived using smoothed accelerations for the design.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.2
• /
• pp.101-111
• /
• 2021

In general, several computational resources are required to perform multiple-loading transient response analyses. In this paper, we present the procedure for multiple-loading transient response analysis using the Krylov subspace model order reduction and Newmark's time integration scheme. We utilized ANSYS MAPDL, Python, and ANSYS ACT to automate the transient response analysis procedure in the ANSYS Workbench environment and studied several engineering numerical examples to demonstrate the feasibility and efficiency of the proposed approach.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1086_1087
• /
• 2009

본 논문에서는 과도 응답 특성에 따른 고분자 전해질 연료전지(PEMFC)를 모델링하였다. 연료전지에 이러한 과도특성이 일어나는 것에 원인에 대하여 분석해보고, 실제 실험을 통해 과도특성이 일어나는 것을 확인하였다. 실험결과 파형을 분석하여 Matlab & Simulink를 이용하여 PEMFC의 과도 응답 특성을 모델링하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.2
• /
• pp.105-111
• /
• 2007

A finite element analysis scheme is proposed to assess the dynamic response due to impulse excitation of ocean mining pipe system. Transient dynamic response analysis based on the proposed scheme was carried out for various types of impulses, and the magnitude of cable tension induced by impulse was discussed by using a model of 'Segero', a special purpose ship of KT-Submarine as well as ROV carrier 'Onnuri' A qualitative, prospective guideline for the relevant marine operation is obtained.

• Journal of IKEEE
• /
• v.20 no.1
• /
• pp.103-106
• /
• 2016

PWM buck converters usually use a type-III error amplifier. Since this amplifier has a big capacitor with slow slew rate, they can generate an unintended large overshoot/undershoot at the output when a large load current change occurs. They can also respond slowly by varying the reference voltage. In order to increase battery lifetime, power supplies require a various range of load current and output voltage. PWM buck converter also should have a characteristic of both fast load response and reference tracking. This paper surveys a few recent techniques for reducing the settling time, and discusses their merits and limitations.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.4
• /
• pp.575-584
• /
• 2017

It is suggested the circuit network to analyze the time response of control system. And it is analyzed the interrelation for classical control and modern control by the transfer function and the state equation. Without complicated integration of state transition equation, it is suggested to possible time response by combining the state transition matrix and the transfer function. A source program is coded to display the time response according to the unit-step and the sinusoidal input. Transient response is analyzed in the unit-step input and phase difference between current and voltage is analyzed in sinusoidal input. As writing the suggested contents in transient response or state-space analysis, it is improved the understanding for control engineering and ability for system design.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.1
• /
• pp.25-32
• /
• 2007

In this paper, a new method for first order plus dead time(FOPDT) model identification is proposed, which can identity multiple points on a process step response in terms of classification of time response. The process input and output to the test are decomposed into the transient part and the steady-state part. The steady-state part express one FOPDT model and the transient part express variously FOPDT model using least square estimation method. The optimum parameter tuning algorithm for PID controller of the Smith Predictor is proposed through ITAE as performance index. The Simulation results show the validity and improvement of performance for various processes.