• Journal of Dental Rehabilitation and Applied Science
• /
• v.37 no.2
• /
• pp.61-72
• /
• 2021

A beautiful smile is made when it is symmetrical and gums are displayed less than 2 - 3 mm. Excessive gingival display also known as "gummy smile" is often recognized to be unaesthetic. Causes of gummy smile can be caused by delayed eruption, vertical maxillary excess, hypermobile upper lip, or a short upper lip. Meanwhile botulinum toxin which is an exotoxin produced from Clostridium botulinum, works by blocking the release of acetylcholine from the cholinergic nerve end plates leading to inactivity of the muscles. The application site and weakens the muscle tone is drawing attention as a gummy smile treatment caused by hypermobile upper lip. There have been many studies about the method of injecting botulinum toxin into muscles around the lips, but there is still no standardized research method and treatment method, so there is controversy over the therapeutic effect. The aim of this study is to review the previous studies about the predictors of indication and effects of gummy smile treatment using botulinum toxin injection. Especially we tried to propose a protocol for optimal dose and efficient injection point through the anatomical considerations for gummy smile treatment using botulinum toxin.

• Korean Journal of Organic Agriculture
• /
• v.20 no.4
• /
• pp.631-642
• /
• 2012

This study was carried out to determine the effect of SCB compost leachate on the growth and yield of rice. Field experiment was conducted on sandy loam soil under the different fertilizer management; 80%, 100%, 130% N level of SCB leachate based on 13kg N/10a of conventional farmer application level and chemical fertilizer as control. The plant height and tiller's number of 80 and 100% N levels of SCB leachate were lower than that of the chemical fertilizer plot. But in the plot of 130% N level of SCB leachate the plant height and tillers was higher than that of chemical fertilizer. And the SPAD reading value of leaf in plot of 130% N level was higher than that of the chemical fertilizer. Rice yield in the 80% and 100% SCB leachate was increased from 12 to 13% that of plot of chemical fertilizer. But rice yield of 130% N-level was decreased 7% compared with chemical fertilizer. Rice quality of the application levels of 80 and 100% SCB leachate levels was significantly better than those of chemical fertilizer and 130% level of SCB leachate. In conclusion, the 100% N application of SCB leachate was improved yield and quality of rice.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.6
• /
• pp.47-55
• /
• 2011

The performance of data transmission from mobile devices to cloud storages is limited by the amount of data being transferred, communication speed and battery consumption of mobile devices. Especially, when the large-scale data communication takes place using mobile devices, such as smart phones, the performance turbulence and power consumption become an obstacle to establish the reliable communication environment. In this paper, we present an efficient data transmission method using USB Hijacking. In our approach, the synchronization to transfer a large amount of data between mobile devices and user PC is executed by using USB Hijacking. Also, there is no need to concern about data capacity and battery consumption in the data communication. We presented several experimental results to verify the effectiveness and suitability of our approach.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.37 no.5
• /
• pp.261-271
• /
• 1988

This paper presents a hierarchical algorithm of the measurement system design by system partitioning. With the increase of system size, the conventional algorithms of the optimal measurement system design confront the problems of excessive memory requirements, long computation time and cumulative computation errors. In order to overcome these problems, a hierarchical approach by system partitioning is proposed with the introduction of equivalent measurements for all the extemal measurements. This approach has the advantage of remarkable reduction in computation time and memory requirements, and guarantees sufficient calculation accuracy in its application to large power systems. The proposed algorithm has been tested for various systems, which shows its applicability to practical power systems.

• Korean Journal of Organic Agriculture
• /
• v.14 no.1
• /
• pp.55-67
• /
• 2006

A survey of 31 organic farmers were conducted to investigate the actual conditions of organic matter application. The amounts of organic matter application in the fields were higher in order of fruit, vegetable and rice farm. The average was 50 ton/ha in vegetable farms. In the green vegetable farms saw dust and animal manure were mainly utilized to make compost. Rice straw, wood chip, and forest bushes were also used for composting. In the fruit vegetable farms materials relatively lower in nitrogen content such as rice straw and cattle manure were used in vegetative period and materials higher in nitrogen content such as oil cake and wild grass were used in reproductive phase. Nutrient balance investigated in the farm in Icheon region who produce lettuce, angelica, and kale continuously in one cropping year indicated surplus in three major nutrients. Nitrogen and phosphorous were in excess by 29 and 10 kg respectively in the organic rice farm in yang-pyoung region. While soil chemical properties in the organic farms are within the adequate range in open field, it is much higher than the limits in the greenhouse soils. Overall application of organic matter is in an oversupply state. This results suggested that the organic matter management should be based on the soil conditions for sustainable cultivation. Chemical composition of organic matters and soil test reports should be considered prior to the application of organic matter.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2001.03a
• /
• pp.97-108
• /
• 2001

절리가 발달한 암반의 거동평가를 위한 해석적 방법은 연속체 모델과 불연속체 모델을 사용하는 방법으로 대별할 수 있으며, 연속체 모델을 사용할 경우에는 유한요소법이나 유한차분법을 이용하는 방법이 주종을 이루고 있다. 불연속체 모델은 개별 블록들의 움직임을 일일이 계산하므로 매우 매력적인 방법이지만 현재의 지반조사 기술수준으로는 지반내의 절리발달사항을 정확히 파악하기가 매우 어려우며, 컴퓨터의 계산용량이 너무 과다해지는 단점이 있다. 따라서, 불연속면을 포함한 암반을 연속체로 가정한 편재절리 모델(ubiquitous joint model)을 이용한 연구가 요구된다. 한편, 터널의 경우는 사면의 경우와는 달리 파괴면의 형상을 사전에 가정하기 어렵기 때문에 한계평형법에 기초한 해석법 등을 적용하여 안전율을 구하기가 곤란하다. 이러한 이유에서 터널을 대상으로 한 수치해석은 안전율을 구하기보다는 안정성을 평가하는 데만 제한적으로 사용되어 왔다. 본 논문에서는 편재절리모델을 이용한 절리암반터널의 거동 평가기법과 수치해석에 의해 터널의 안전율을 구하는 방법을 제시하는 데에 그 목적이 있다. 이를 위해 터널의 안전율 구하는 방법을 강도감소기법에 근거하여 제시하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.1118-1122
• /
• 2005

수중보는 하천, 하수관 또는 인공수로에 건기시 유지수량을 확보할 목적으로 설치되며 제한 범위 이상의 물이 유입되는 경우 원활한 치수를 위하여 이를 자동적으로 방출시키도록 자동으로 수문을 개폐시키는 장치가 필요하다. 보통 10년 주기 내외의 평균 강우량에 맞추어서 그 용량이 결정되어야 경제성을 확보할 수 있게 된다. 그러나 10년 주기의 평균 강우량을 초과하는 강우가 발생할 경우에 유입되는 전체 수량을 유입시키면 해당 기기에 상당한 손상을 입히게 된다. 또한 재현기간을 너무 길게 잡을 경우, 해당 수처리의 설치비용이 과다하게 되고, 경제성이 낮아질 수 밖에 없다. 따라서 수처리를 위한 장치의 규모는 적정한 재현기간에 맞추어 설계하고, 재현기간을 초과하여 강우가 발생할 경우 강우 유입을 우회시킬 필요가 있게 된다. 이와 같이 수량을 우회 또는 통과시킬 목적으로 초과유량을 방출할 수 있는 완충회전수문 실험 모형을 제작하여 여러 차례의 실험을 토대로 한계수심 및 충격량을 이론적으로 산정하였다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1344-1345
• /
• 2011

경북 군위군 고로면에 위치한 저수용량 48,000천톤의 군위 다목적댐에 설치된 소수력발전기에 대한 설치공사 중 수차 설계도면 해석오류에 의한 Guide Vane(이하 G/V로 함.) 과다개방으로 인한 설비고장 및 개선사례, 년 중 댐 수위 변동을 감안한 정격수위와 저수위 시의 수차효율 시험을 통한 댐 수위별 최적의 발전설비 운영방안을 검토하여 저탄소 녹색에너지원인 군위다목적댐 소수력의 발전수익 증대를 도모하였다.

• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.95-97
• /
• 2004

케이블 변압기용 케이블에는 반도전층이 설치되며 권선의 각 턴에 대하여 외측 반도층을 접지함으로써 권선에 과다 전계가 인가될 때 이로 인한 전압 스트레스를 막아주는 역할을 한다. 따라서 케이블 변압기에서는 변압기 용량에 따라 이 반도전층의 저항률과 두께 등을 적절히 선정하는 것이 매우 중요하다. 케이블 권선에서 반도전층의 높은 저항률은 두 개의 접지점 사이의 반도전층에서 높은 전계분포를 발생시키고, 낮은 저항률은 반도전층에서 높은 전력손실을 발생시킨다. 본 논문에서는 해석하고자 하늘 모델에 FEM 해석을 적용하고, 반도전층 두께에 따른 특성해석을 수행한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.8 no.1
• /
• pp.30-37
• /
• 1983

In this paper I have proposed a heuristic layout algorism which is important in the CAD system of VLSI. I have designed a placement algorism to be used the method which depends upon the synthetic judgment of human. The placement algorism can reflect the position of a module in a logical design circuit diagram drawn up by human beings. Also, in order to show the usefulness of the new method I have compared through a program experiment it with the former method of cluster development placement. Moreover, a routing algorism is proposed in order to reduce the excessive problem of memory capacity. Of course this new algorism compensates for the former Maze's defects.