• Journal of the Korean Wood Science and Technology
• /
• v.35 no.1
• /
• pp.73-80
• /
• 2007

This study was carried out to separate the heavy toxic metals in eco-building materials by low-temperature pyrolysis, especially arsenic (As) compounds in CCA wood preservative as a solid in char. The pyrolysis was carried out to heat the CCA-treated Hemlock at $280^{\circ}C$, $300^{\circ}C$, $320^{\circ}C$, and $340^{\circ}C$ for 60 mins. Laboratory scale pyrolyzer composed of [preheater$\rightarrow$pyrolyzer$\rightarrow$1st water scrubber$\rightarrow$2nd bubbling flask with 1% $HNO_3$ solution$\rightarrow$vent], and was operated to absorb the volatile metal compound particulates at the primary water scrubber and the secondary nitric acid bubbling flask with cooling condenser of $4^{\circ}C$ under nitrogen stream of 20 mL/min flow rate. And the contents of copper, chromium and arsenic compounds in its pyrolysis such as carbonized CCA treated wood, 1st washing and 2nd washing liquors as well as its raw materials, were determined using ICP-AES. The results are as follows : 1. The yield of char in low-temperature pyrolysis reached about 50 percentage similar to the result of common pyrolytic process. 2. The higher the pyrolytic temperature was, the more the volatiles of CCA, and in particular, the arsenic compounds were to be further more volatile above $320^{\circ}C$, even though the more repetitive and sequential monitorings were necessary. 3. More than 85 percentage of CCA in CCA-treated wood was left in char in such low-temperature pyrolytic condition at $300^{\circ}C$. 4. Washing system for absorption of volatile CCA in this experiment required much more contacting time between volatile gases and water to prevent the loss of CCA compounds, especially the loss of arsenic compound. 5. Therefore, more complete recovery of CCA components in CCA-treated wood required the lower temperature than $320^{\circ}C$, and the longer contacting time of volatile gases and water needed the special washing and recovery system to separate the toxic and volatile arsenic compounds in vent gases.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.3
• /
• pp.1-8
• /
• 2008

The lateral strength test of bending type was done to investigate the lateral capacity of the double bolt connection of domestic larix glulam according to bolt spacing. In the shear specimen, which is bolted connection in the inserted plate type, the hole of bolt was made, changing the diameter of bolt (12 mm and 16 mm), the number of bolt (single bolt : control and double bolt), the direction of bolt row (in parallel to grain : Type-A and in perpendicular to grain : Type-B) and the bolt spacing (Type-A : 4 d and 7 d and Type-B : 3 d and 5 d). Lateral capacity and failure mode of bolt connection were compared according to conditions. In prototype design (KBCS, 2000), the reduction factor of the allowable shear resistance that the bolt spacing is reduced was calculated. The results were as follows. 1) Bearing stress per bolt in the single and double bolt connection of Type-A was directly proportional to bolt diameter and bolt spacing. Bearing stress of Type-B decreased as bolt diameter was increased, and decreased by 2~10% when bolt diameter was increased. 2) In the single bolt connection and the double bolt connection of Type-A, the splitted failure was formed in the edge direction. When the bolt spacing was 3 d in Type-B, bolt was yielded more in the part of tension than in the part of compression, and the splitted failure started at the bolt in the part of tension. In the 5 d spacing specimen, the bolt in the part of tension was yielded similarly to bolt in the part of compression, and the splitted failure started in the part of compression. 3) In the prototype design, the reduction factor was calculated by non-dimensionizing the yielding load in the standard of bolt spacing (Type A : 7 d and Type B : 5 d). In 12 mm bolt connection, the reduction factor of bolt spacing 4 d (type-A) and single bolt connection was 0.87 and 0.55, respectively, and the reduction factor of bolt spacing 3 d (Type-B) and single bolt connection was 0.91 and 0.55, respectively. In 16 mm bolt connection, the reduction factor of bolt spacing 4 d (type-A) and single bolt connection was 0.96 and 0.76, respectively, and the reduction factor of bolt spacing 3 d (Type-B) and single bolt connection was 0.91 and 0.77, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.3
• /
• pp.30-38
• /
• 2008

Petroleum-based resin adhesives have extensively been used for the production of wood panels. However, with the increase of manufacturing cost and the environmental issue, such as the emission of volatile organic compounds, of the adhesive resins, it is necessary to be developed new adhesive systems. In this study, the potential of okara, which is a residue wasted from the production of tofu, for the development of bio-based adhesives was investigated. At first, the physical and chemical properties of okara were examined. After okara was hydrolyzed in acidic and/or alkaline solutions, okara-based adhesive resins were formulated with the mixtures of the okara hydrolyzates and phenol formaldehyde (PF) prepolymer. The adhesive resins were used for the fabrication of plywood panels, and then the adhesive strength and formaldehyde emission of the plywood panels were measured to examine the applicability of the resin adhesives for the production of plywood panels. The solids content and pH of the okara used in this study were around 20% and weak acidic state, respectively. In the analysis of its chemical composition, the content of carbohydrate was the highest, and followed by protein. The shear strengths of plywood fabricated with okara-based resin adhesives exceeded a minimum requirement of KS standard for ordinary plywood, but its wood failure did not reach the minimum requirement. In addition, the formaldehyde emissions of all plywood panels were higher than that of E1 specified in the KS standard. Based on these results, okara has the potential to be used as a raw material of environmentally friendly adhesive resin systems for the production of wood panels, but further researches - biological hydrolysis of okara and various formulations of PF prepolymer - are required to improve the adhesive strength and formaldehyde emission of okara-based resin adhesives.

• Journal of Chest Surgery
• /
• v.40 no.2 s.271
• /
• pp.90-96
• /
• 2007

Background: Postoperative atrial fibrillation is the most frequently arrhythmic complication associated with coronary artery bypass graft surgery. This study was designed to investigate the incidence of atrial fibrillation in patients undergoing OPCAB and on-pump CABG and to identify the risk factors associated with its development. Material and Method: 247 consecutive patients were evaluated among 306 patients who underwent the coronary artery bypass graft surgery between January, 2002 and December, 2005. 178 patients underwent OPCAB (OPCAB group) and 69 patients underwent On-pump CABG (On-pump CABG group). The incidence and the risk factors of atrial fibrillation in two groups were determined. Result: There were no significant differences between two groups with respect to the preoperative demographic characteristics of the patients. The incidences of postoperative atrial fibrillation were 25 cases (14%) in OPCAB group and 15 cases (21%) in On-pump CABG group. Age over 65 years, net positive fluid imbalance for postoperative 3 days, and chest tube bleeding for postoperative 3 days were independent predictive factors in OPCAB group. Age over 65 years and net positive fluid imbalance for postoperative 3 days were independent predictive factors in On-pump CABG group. In multivariate analysis, age over 65 years was the only risk factor of postoperative atrial fibrillation in both groups. Conclusion: Atrial fibrillation is a common complication after procedures of myocardial revascularization. There wasn't a low incidence of postoperative atrial fibrillation in OPCAB, compared with On-pump CABG. Age over 65 years was associated with postoperative atrial fibrillation irrespective of the use of cardiopulmonary bypass.

• Korean Journal of Soil Science and Fertilizer
• /
• v.3 no.1
• /
• pp.49-54
• /
• 1970

In an effort of determine the metabolism and bio-synthesis of nitrogen, was studied at variance of souble nitrogens, free amino acids and total alcohol soluble amino acids during the growth of younger soybean plants, and saybean divides into cotyledon and embryonic organ (shoot and root system) in this experiment. 1. In the soluble nitrogen of soybean, ratio of increase and decrease in the amino acids of them was displayed the near phenomena both cotyledon and embryonic organ of soybean. But, in the 17th days after seed germination, that is the developmeatal stage of adult leaf of soybeans, was appear the maximum value. It has been suggested that the stage of first half period of growth as boundary the stage of adult leaf development which indicated clear morphologically, at the younger soybean plants, is the step that nitrogen assimilation. 2. It was investigated the amino acids of seventeen kinds in the seed state, but at the third days after seed germination, was investigated the amino acids of nineteen kinds. Ultimately, it appears the translocation from cotyledon to embryonic organ in the distribution of amino acid, the nineth day which differentiation begining day of embryonic organ, then after, it happen the variation of number of inspected amino acid in the cotyledon and embryonic organ but only the variance changes in the distribution and quantitative aspects. Especially, the most conspicuous fact was indicated the accumulation of Asparagine, that is the phenomena of Asparagine-accumulation was constitute, not with standing no fertilization from outside. It may be concluded from the results of this investigation that the difference of special phenomena of soybean from the embryo of other plans. 3. In the initial stage of differentiation at embryonic organ number of inspected amino acid was very few, and then, it was slightly appeared the increase-phenomena in the number of them. It was that the amino acid inspecting the initial stage was translocated from the cotyledon. It is suggested that the intermediate-metabolism of amino acid was constituted on the basis of above the result. 4. The phenomena of increase and decrease of total alcohol soluble amino acid were essentially identical to the water soluble amino acid of soybean, but it was appeared the severe difference of amounts in both of them.

• Korean Journal of Weed Science
• /
• v.7 no.2
• /
• pp.144-155
• /
• 1987

Water extracts of polygonum hydropiper and Polygonum aviculare completely inhibited the germination of lettuce seeds. Methanol extracts from these two species also inhibited the seed germination of lettuce (Lactuca sativa) and Oenothera odorata. Fifteen phenolic acids in total were identified by GLC from P. hydropiper and eighteen from P. aviculare. The most common phenolic acids identified from P. hydropiper were sinapic, salicylic+vanillic and ferulic acid presented in all the fractions. In addition, salicylic+vanillic, tannic+gallic, sinapic, ferulic and p-coumaric acid seemed to be important phenolic compounds in terms of quantity. However, salicylic+vanillic acids were the unique phenolic acids occurred in all the fractions of P. aviculare. The others such as tannic+gallic, sinapic, ferulic, p-coumaric acid, p-cresol and catechol present in large amount appeared also the important phenolic substances influencing allelopathic effects of P. aviculare. Linolenic acid and oxalic acid were the major fatty and organic acids in both plant species, presented in 2.38mg/g and 20.588mg/g in P. hydropiper, 3.70mg/g and 14.288mg/g in P. aviculare, respectively, which seem to be exhibiting allelopathic effects of these plants. Total alkaloids were presented in low amount such as 0.20% in P. hydropiper arid 0.22% in P. aviculare which may not be important elements. Pet. ether extracts were 2.42% in P. hydropiper and 1.65% in P. aviculare, which exhibit another potential for allelopathic effects that need further investigation. Various authentic phenolic compounds at different concentrations inhibited the germination of lettuce seed, indicating that the phenolic substances identified here may be directly related to biologically active substance.

• Tunnel and Underground Space
• /
• v.22 no.4
• /
• pp.266-275
• /
• 2012

In this study, a method is devised to implement a supercritical $CO_2$ ($scCO_2$) injection environment on a laboratory scale and to investigate the effects of $scCO_2$ on the properties of rock specimens. Specimens of shale and sandstone normally constituting the cap rock and reservoir rock, respectively, were kept in a laboratory reactor chamber with $scCO_2$ for two weeks. From this stage, a chemical reaction between rock surface and the $scCO_2$ was induced. The effect of saline water was also investigated by comparing three conditions ($scCO_2$-rock, $scCO_2-H_2O$-rock and $scCO_2$-brine(1M)-rock). Finally, we checked the changes in the properties before and after the reaction by destructive and nondestructive testing procedures. The swelling of shale was a main concern in this case. The experimental results suggested that $scCO_2$ has a greater effect on the swelling of the shale than pure water and brine. It was also observed that the largest swelling displacement of shale occurred after a reaction with the $H_2O-scCO_2$ solution. The results of a series of the destructive and nondestructive tests indicate that although each of the property changes of the rock differed depending on the reaction conditions, the $H_2O-scCO_2$ solution had the greatest effect. In this study, shale was highly sensitive to the reaction conditions. These results provide fundamental information pertaining to the stability of $CO_2$ storage sites due to physical and chemical reactions between the rocks in these sites and $scCO_2$.

• Tunnel and Underground Space
• /
• v.21 no.1
• /
• pp.33-40
• /
• 2011

This study focuses on having a temperature and water pressure effects on the change of material properties of rocks. Granite and limestone specimens from Gagok Mine were thermally treated with predetermined temperatures of 200, 300, 400, 500, 600 and $700^{\circ}C$ (excepting $700^{\circ}C$ for limestone) to estimate the reduction of material properties of rocks caused by heat. Specific gravity, effective porosity, elastic wave velocity, uniaxial compressive strength, Young's modulus and Poisson's ratio for pre-heated specimens were measured. With increasing temperature, material properties of both rock specimens change sequentially. Significant changes of specific gravity, effective porosity and elastic wave porosity occur above $400^{\circ}C$ for granite and $300^{\circ}C$ for limestone. Changes of uniaxial compressive strength, Young's modulus and Poisson's ratio seem to be similar to those of physical properties. GSI of 500, 600 and $700^{\circ}C$ specimens inferred by using uniaxial compressive strength and Young's modulus of preheated granite specimens is found to be 81, 66 and 58 each. In case of pre-heated limestone specimens of 400, 500 and $600^{\circ}C$, the corresponding GSI is 76, 71 and 65 each. 500, 600 and $700^{\circ}C$ granite specimens and 400, 500 and $600^{\circ}C$ limestone specimens were pressurized to 7.5 MPa and their effective porosity, elastic wave velocity, uniaxial compressive strength and Young's modulus were measured. The average value of material properties (mentioned above) of 500, 600 and $700^{\circ}C$ granite specimens under water pressure compared with material properties of non-pressurized pre-heated specimens exhibits the reduction of 7.6, 11.3 and 14.9%, respectively. In case of 400, 500 and $600^{\circ}C$ limestone specimens under water pressure, the average value of material properties decreases by 8.2, 13.8 and 21.9%, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.1 s.129
• /
• pp.87-96
• /
• 2005

This study was carried out to evaluate the shear bond strength and adhesive bond durability of structural glued laminated timber (glulam) manufactured with mixed species lumber of Korean red pine, Korean pine and Japanese larch, using resorcinol adhesive and water-based polymeric-isocyanate adhesive (WPI). Each board used as a glulam lamina was graded by visual inspection. The visual lumber grade of the all species was very low due to the large size and number of knots and the steep slope of grain. In view of the results, appropriate pruning, sawing and drying processes might be needed to produce high grade lamina lumber with small knot size and drying defect free. Shear bond strength of every tested glulam specimen ranged between 7.9 and $9.9N/mm^2$, and much higher than the Korean Standard (KS) for glulam shear bond strength, $7.1N/mm^2$. There was not much shear bond strength difference between wood/resorcinol and wood/WPI. The resorcinol adhesive bond durability exceeded KS requirements. However, delamination on the end-grain surfaces of WPI glulam submerged in both room temperature and boiling water severely occurred, and its durability did not meet KS requirements. Further investigations may be required, and special care should be taken, to ensure long service life of WPI glulam used for exterior application. Results of this study are expected to be useful for improvement of mechanical properties and structural performance of mixed species glulam.

• Journal of Plant Biotechnology
• /
• v.29 no.3
• /
• pp.151-159
• /
• 2002

Genetic map and molecular marker have a great importance in improving and facilitating crop breeding program as well as in genome analysis and map-based cloning of genes representing desirable characters. This study aimed at developing RAPD markers and constructing a genetic linkage map using 82 BC$_1$F$_1$individuals originated from the cross between '835' and B$_2$in radish (Raphanus sativus L.). One of the parents for genetic linkage map construction, '835'(P$_1$) of egg type is susceptible to Fusarium wilt and have medium resistance to virus infection and the other parent, B$_2$(P$_2$) of round type, is susceptible to Fusarium wilt and virus, Screening of 394 RAPD primers in BC$_1$F$_1$) population resulted in selecting 128 polymorphic markers which displayed 1:1 segregation pattern. Two markers failed to display 1:1 segregation and showed the segregation ratio skewed to maternal genotype. Selected markers were categorized into 14 linkage group based on LOD score represented by MAPMAKER/EXP program. Five groups composed of single marker among them were excluded from the linkage map, and consequently, the remaining groups are well matched with the number of radish chromosome (n＝9). The linkage map constructed with 128 markers covers 1,688.3 cM and the average distance between markers was 13.8 cM. For developing STS marker, we determined the partial nucleotide sequence of OPE10 marker at both ends and designed a oligonucleotide primer pair based on this sequence. STS PCR using the primer pair displayed a single, clear band of which segregation is perfectly matched with that of OPE10 marker. This implies that RAPD markers could readily convert into clear and reliable STS markers.