• The Journal of Korean Society for School & Community Health Education
• /
• v.9 no.2
• /
• pp.15-31
• /
• 2008

Objective: This study is a quasi-experimental study by nonequivalent control group pretest-posttest design, performed in order to identify whether the program developed on the basis of Ajzen(1988, 1991)'s theory of planned behavior (TPB) for predicting the safety behavior of students of department of dental technology affects intention toward safety behavior and general behavior. Therefore, the purpose of this study is to identify whether the safety education in laboratories in which knowledge is reinforced on the basis of the TPB theory affects safety behavior. Methodology: The theoretical framework of this study was established on the basis of the TPB by Ajzen(1988, 1991). This study was performed between May 20 and December 5, 2006, and the subjects included 101 in the experimental group and 98 in the control group, a total of 199. The experimental group was educated through six 50-minute sessions (twice a week) for three weeks. The experimental group was pretested, educated, and then asked to answer the pro-questionnaire after finishing the sixth session, but the control group was free from intervention. The research tool in this study was developed by the authors with reference to the process of tool development used in Schifter and Ajzen (1985) based on Ajzen and Fishbein(1980)'s tool development guide. Results: The data were analyzed through SPSS 14.0 version. The reliability test of attitude, subjective norm, perceived norm, intention, and behavior toward safety behavior as TPB variables was calculated of Cronbach's alpha coefficient, and general characteristics and the homogeneity test of the experimental and the control groups were analyzed through t test and $X^2$ test. According to the results of the analysis, the experiment group may be higher than the control group after the safety education in the scores of attitude, the subjective norm, the perceived norm, and the intention toward safety behavior as TPB independent variables showed no significant difference, but there was significant difference in the behavior and the knowledge. Meanwhile, according to the results of the pretest and posttest, eleven items in the experimental group and two items in the control group showed significant difference in the behaviors, and twelve in the former and four in the latter were significantly different in the knowledge. Conclusion: The safety education program developed on the basis of TPB was identified to enhance safety behavior and knowledge. Therefore, the safety education program used in this study for students of department of dental technology may be utilized as database for safety education in the department of dental technology.

• Journal of Broadcast Engineering
• /
• v.16 no.1
• /
• pp.23-32
• /
• 2011

Design and Implementation of Clipcast Service via Terrestrial DMB This paper outlines the system design and the implementation process of clipcast service that can send clips of video, mp3, text, images, etc. to terrestrial DMB terminals. To provide clipcast service in terrestrial DMB, a separate data channel needs to be allocated and this requires changes in the existing bandwidth allocation. Clipcast contents can be sent after midnight at around 3 to 4 AM, when terrestrial DMB viewship is low. If the video service bit rate is lowered to 352 Kbps and the TPEG service band is fully used, then 320 Kbps bit rate can be allocated to clipcast. To enable clipcast service, the terminals' DMB program must be executed, and this can be done through SMS and EPG. Clipcast service applies MOT protocol to transmit multimedia objects, and transmits twice in carousel format for stable transmission of files. Therefore, 72Mbyte data can be transmitted in one hour, which corresponds to about 20 minutes of full motion video service at 500Kbps data rate. When running the clip transmitted through terrestrial DMB data channel, information regarding the length of each clip is received through communication with the CMS(Content Management Server), then error-free files are displayed. The clips can be provided to the users as preview contents of the complete VOD contents. In order to use the complete content, the user needs to access the URL allocated for that specific content and download the content by completing a billing process. This paper suggests the design and implementation of terrestrial DMB system to provide clipcast service, which enables file download services as provided in MediaFLO, DVB-H, and the other mobile broadcasting systems. Unlike the other mobile broadcasting systems, the proposed system applies more reliable SMS method to activate the DMB terminals for highly stable clipcast service. This allows hybrid, i.e, both SMS and EPG activations of terminals for clipcast services.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.5
• /
• pp.133-137
• /
• 2017

The purpose of this study was to validate for GATE (Geant4 Application for Tomographic Emission) simulation by comparing the results of GATE simulation and experiment in real SPECT system. Futhermore, we want to prove that it is possible that the quantitative research of gamma camera/SPECT imaging for therapeutic radio isotope by using GATE simulation. In this study, the SPECT system on simulation referred to the parameters of Stream-R Forte version 1.2 (Philips Medical System, Best and Heerlen, Netherlands). To understand the I-131 image of gamma camera/SPECT system, we acquired the energy spectrum and measured the full width at half maximum (FWHM) which comes from line spread function (LSF) with and without scatter material in real SPECT system. And to compare with experiment, we also measured the FWHM and acquired the energy spectrum without scatter material in GATE simulation. As a result, without scatter material, the energy peak was almost same location, which are located nearby 364 keV, and other spectrum factors are same tendency in both cases. The FWHM was increased by increasing the distance of source to detector, and the error rate was approximately 3.8%. When we used the line source with scatter material, energy spectrum also indicated similar tendency in both cases. As you confirmed earlier, GATE simulation included real instrument and radioisotope characters for therapeutic radioisotope. Therefore this result that it was possible that various quantitative study for therapeutic radioisotope imaging in gamma camera/SPECT using GATE simulation.

• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.63-74
• /
• 2006

During the construction of circular underground pipe, the non-proper compaction along the pipe and the decrease of compaction efficiency have been the main problems to induce the failure of underground pipe or facility. The use of CLSM (controlled low strength materials) should be one of the possible applications to overcome those problems. In this research, the full-scaled field test and the numeric analysis using PENTAGON-3D FEM program were carried out for three different cases on the change of backfill materials, including the common sand, the soil from construction site, and the CLSM. From the full-scaled test in field, the use of in-situ CLSM as backfill materials reduced the vertical and lateral deformation of the pipe, as well as the deformation of the ground surface. The main reason for reducing the deformation would be the characteristics of the CLSM, especially self-leveling and self-hardening properties. The measured earth pressure at the surround of the corrugated pipe using the CLSM backfills was the smaller than the other cases, and the absolute value was almost zero. Judging from the full-scaled field test and FEM analysis, the use of CLSM as backfill materials should be one of the best choices reducing the failure of the underground pipes.

• Journal of Korean Home Economics Education Association
• /
• v.18 no.4 s.42
• /
• pp.39-54
• /
• 2006

The main purpose of this study is to analyze the influence of gender equality consciousness of middle and high school student on the preference for Technology Home Economics and its teaming effectiveness. For this purpose, the gender equality consciousness, the preference and learning effectiveness of Technology Home Economics were measured among a number of 404 middle and high school students in Chuncheon city. The results of this study were summarized as following: 1. The gender equality consciousness of female students was higher than that of male students. 2. Middle and high school students had the higher preference and learning effectiveness for the Home Economics area in Technology Home Economics than they had for the Technology. 3. Female student's preference and learning effectiveness for the Home Economics area in Technology Home Economics were higher than male student's. Male student's preference and Loaming effectiveness for the Technology area in Technology Home Economics were higher than female student's. 4. The group which had relatively high gender equality consciousness score showed the higher preference and learning effectiveness for the Home Economics area in Technology Home Economics than the group with low gender equality consciousness score. In contrast, the group with low gender equality consciousness score had the higher preference for the Technology area in Technology Home Economics than the group with high gender equality consciousness score. In conclusion, gender equality consciousness and gender type had the most strong influence on the preference and learning effectiveness for Technology Home Economics among middle-high school students.

• Journal of Energy Engineering
• /
• v.24 no.4
• /
• pp.200-210
• /
• 2015

The modeling for fast pyrolysis of biomass in fluidized bed reactor has been developed for accurate prediction of bio-oil and gas products and for yield improvement. The purpose of this study is to analyze and to compare the CFD(Computational Fluid Dynamics) simulation results with the experimental data from the CFD simulation results with the experimental data from the reference(Mellin et al., 2014) for gas products generated during fast pyrolysis of biomass in fluidized bed reactor. CFD(ANSYS FLUENT v.15.0) was used for the simulation. Complex pyrolysis reaction scheme of biomass subcomponents was applied for the simulation of pyrolysis reaction. This pyrolysis reaction scheme was included reaction of cellulose, hemicellulose, lignin in detail, gas products obtained from pyrolysis were mainly $CO_2$, CO, $CH_4$, $H_2$, $C_2H_4$. The deviation between the simulation results from this study and experimental data from the reference was calculated about 3.7%p, 4.6%p, 3.9%p for $CH_4$, $H_2$, $C_2H_4$ respectively, whereas 9.6%p and 6.7%p for $CO_2$ and CO which are relatively high. Through this study, it is possible to predict gas products accurately by using CFD simulation approach. Moreover, this modeling approach should be developed to predict fluidized bed reactor performance and other gas product yields.

• The Journal of the Korea Contents Association
• /
• v.11 no.5
• /
• pp.242-251
• /
• 2011

A curriculum of study demands a change as period of time and society evolve. Therefore, at this point where changes are required, this study is to analyze and evaluate the curriculums which will enhance and improve current studies as a preceding stage. The research was based on the survey by groups of education experts and 19 universities with current curriculum of study in radiologic science, and their references. The study was focused on the scope of work by radiologic technologist, change of college systems, academic research about radiologic science, and the improvement and the future of radiologic science field in perspective to globalization and the digital era. In terms of work scope, angiography and interventional radiology at 6 to 8 schools, fluoroscopy at 4 schools, ultrasound and practices at 6 schools, magnetic resonance image at 2 schools were found to be unestablished. The basic medical subjects, humuan physiology, human anatomy and practices, medical terminology courses were set up at most schools; however, pathology at 5 schools, image anatomy at 6 schools, clinical medicine at 11 schools were yet opened. Among the basic science and engineering subjects, general biology and its practices at 11 schools, general physics and its practices at 14 schools, and general chemistry and its practices at 8 schools were established which is about a half from a total number of schools. Only 4-5 schools established digital subjects such as, health computer, computer programming, PACS which are the basic major subjects. In order to provide academic improvement in radiologic science, digitalized education and globalization, and basis for future-oriented education for the field of radiologic science, including expanded scope of work, it is acknowledged that curriculums that are opened and run at each school need to be standardized. Therefore, the need for introduction of certificate for the radiologic science education courses are suggested.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.2
• /
• pp.29-39
• /
• 2011

Recent interests in the quality of urban space have raised awareness on the role and importance of landscape planning. Although laws and guidelines are officially ready to be imposed as for landscape planning, we do not have concrete materials that can be utilized in the course of practices. The aim of this paper in this regard is to disclose the possible difference in awareness on 'visual landscape control elements' among experts engaged with urban space planning. The expert groups are distinguished to three which are for a planning, design and engineering and the survey is made by questionnaires. The results are analyzed through basic technology statistics in SPSS and independent-sample t-test provided. The survey is done by tens of 'control elements' and the result is that specially, group 1 and group 2 in mixed landscape has the most discrepancy in awareness on those elements but relatively, they has less discrepancy in awareness on compare with other groups through all landscape area. In case of artificial landscape and mixed landscape in 'landscape controled area', the result for comparing between G1 and G2 is that there are the most discrepancy in awareness which are 7 control elements. In case of mixed landscape in 'landscape promoted area', there are 4 control elements for discrepancy in awareness between G2 and G3 which is quite different. The control elements which show the most discrepancy in awareness is height, floor space and building to land ratio in order. The shape elements has only discrepancy in awareness for comparing between G1 and G2 of artificial landscape in 'landscape controled area'. In terms of the average evaluation score of the appropriateness of these control elements, G1 seems to appreciate the role of these elements in systematic landscape planning more than the other group does. In other words, relatively low scores are given by G2 as for the overall functionality of visual landscape control elements. The texture, floor space and building of land ratio has low evaluation score for all area and types. It means that it should reverify for appropriateness of performance for landscape planning as visual landscape control elements.

• The Journal of Engineering Geology
• /
• v.18 no.4
• /
• pp.415-422
• /
• 2008

Pumping test was conducted to understand hydraulic conductivity for leaky confined aquifer with high permeability. Test aquifer was formed in $25{\sim}35\;m$ below ground surface at predetermined site of riverbank filtration which junction of Nakdong river and Milyang river in the Ttaan isle, Gimhae city, Korea Monitoring wells were located at intervals of 2 m and 5 m from pumping well in south-west direction (MW1 and MW2 wells) and northeast direction (MW3 and MW4 wells), respectively. Pumping test was continuously conducted for constant pumping rate of $2,500m^3/day$, hydraulic conductivity was estimated using AQTESOLV 3.5 program. Hydraulic conductivity were estimated to be $1.745{\times}10^{-3}m/sec$ for pumping well (PW), $2.452{\times}10^{-3}m/sec$ for between PW and MW1 wells, $2.161{\times}10^{-3}m/sec$ for between PW and MW2 wells, $2.270{\times}10^{-3}m/sec$ for between PW and MW3 wells and $2.591{\times}10^{-3}m/sec$ for between PW and MW4 wells. The function of hydraulic conductivity (K) as monitoring distance (d) were estimated to be logK = 0.0693logd - 2.671 for south-west direction (PW-MW1-MW2 line), logK = 0.0817logd - 2.655 for north-east direction (PW-MW3-MW 4 line). Scale exponent of hydraulic conductivity as test volume was estimated using Schulze-Makuch et al.(1999) method. Scale exponent of this aquifer was estimated to be 0.15. It means that test aquifer has very low heterogeneity. The radius of influence estimated using transmissivity, maximum groundwater level displacement, distance from pumping well and pumping rate during pumping test were 7.148 m for south-west direction and 6.912 m for north-east direction. The increasing rate of hydraulic conductivity from pumping well to maximum radius of influence were estimated to be 1.40 times for south-west direction and 1.49 times for north-east direction. Thus, heterogeneity of test aquifer was a little higher in north-east direction.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.387-393
• /
• 2021

In this study, finite element analysis was performed to evaluate a method of increasing the fatigue life of the pipe connection structure commonly used in the topside structure of offshore platforms. MSC Patran/Nastran, a commercial analysis program, was used, and the critical structural model was selected from the global analysis. To realize the stress concentration phenomenon according to the load, modeling using 8-node solid elements was implemented. The main loads were considered to be two lateral loads and a tensile load on a diagonal pipe. To check the hotspot stress at the main location, a 0.01 mm dummy shell element was applied. After calculating the main stress at the 0.5-t and 1.5-t locations, the stress generated in the weld was estimated through extrapolation. In some sections, this stress was observed to be below the fatigue life that should be satisfied, and reinforcement was required. For reinforcement, a bracket was added to reduce the stress concentration factor where the fatigue life was insufficient without changing the thickness or diameter of the previously designed pipe. Regarding the tensile load, the stress in the bracket toe increased by 23 %, whereas the stress inside and outside of the pipe, which was a problem, decreased by approximately 8 %. Regarding the flexural load, the stress at the bracket toe increased by 3 %, whereas the stress inside and outside of the pipe, which was also a problem, decreased by approximately 48 %. Owing to the new bracket reinforcement, the stress in the bracket toe increased, but the S-N curve itself was better than that of the pipe joint, so it was not a significant problem. The improvement method of fatigue life is expected to be useful; it can efficiently increase the fatigue life while minimizing changes to the initial design.