• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04a
• /
• pp.531-534
• /
• 1995

기계부품의 설계는 공차정보를 포함한다. 이러한 공차정보는 그것의 특성에 따라 실제 부품에 속한 형상이 놓여야 할 공차영역으로 표현되고, 필요하다면, 각 공차간의 관계 도 포함하여야 한다. 기하 공차는 데이팀을 기준 좌표계로 하여 형상, 자세 및 위치를 구 속하며 이러한 관계는 변환 행렬로 표현할수 있다. 특히 이들 변환 행렬의 미소한 변화 를 나타내는 미소 변환 행렬은 각 좌표계간의 공차의 전파를 용이하게 한다. 이러한 표 현방법은 형상 모델링 시스템이나 공차에 관련된 문제에 쉽게 적용할 수 있다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.419-426
• /
• 2001

Industrial products determined by fixed size posses definite limits variety by manufacture tolerance in existence. The optimum value solved by deterministic approaches do not account of tolerance bands of design variables and material properties. If we examine optimum value considering tolerance bands of design variables and material properties, it might be useless, owing to exist infeasible region. We have two ways to prevent being useless value. The one is to minimize tolerance band, the other is to consider tolerance band in optimum design. The former needed more accuracy during manufacturing process require higher production cost, the letter is more appropriate to consider tolerance band. In this research, we consider the tolerance bands of all variables, which might have the tolerance bands used in the problem, based on optimum value of deterministic approaches. Orthogonal arrays are used to minimize the number of trial. Tolerance bands are supposed discretionary according to design variable. Appropriateness suggested by this research is examined through two examples. Mathematical problem is investigated only in terms of tolerance bands of design variables, and cantilever beam problem is explained through tolerance bands of design variable, material properties and loading conditions. It is proved that values from the presented method are satisfactory for tolerance bands of variables.

• Journal of the KSME
• /
• v.34 no.3
• /
• pp.177-184
• /
• 1994

이 글에서는 기하공차의 기본적인 개념들에 대한 설명과 삼차원측정기 응용소프트웨어에서 기하 공차를 평가하기 위한 수학적인 방법들에 대해 소개하였다. 최소영역법은 ISO규격에 의한 공차 평가법이란 점에서 근래의 연구의 대부분을 차지하고 있으나 표준적인 알고리즘이라 할 수 있는 방법은 아직 발표되지 않고 있으며 실용적인 소프트웨어의 경우 최소자승법을 근간으로 하고 있는 실정이다. 최근에는 이러한 형상추출과 기하공차평가를 포함하는 좌표식 측정기 술(coordinate metrology)이 컴퓨터통합생산(computer integrated manufacturing)시스템 구축에 있어서 아킬레스건이라 할 수 있는 컴퓨터원용검사(computer aided quality control)의 핵심적인 기술로 인식되어 선진국에서는 이미 표준기술을 확립하고자 하는 목적으로 체계적인 지원하에 연구를 수행하고 있다. 그러므로 국내에서도 품질보증에 의한 제조업 분야의 생산성 제고를 위 하여 좌표식 측정기술에 대한 연구와 투자가 시급하며 국내의 표준기술 확립이 절실히 요청되고 있다하겠다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04a
• /
• pp.535-543
• /
• 1995

조립체를 표현하는 가장 간단한 방법은 각 부품의 좌표간의 변환 행렬을 이용하여 위 치와 방향을 정의하는 것이다. 이때 각 부품은 가공단계에서 발생한 형상 오차를 가질 수 있는데 그 형용영역은 설계단게에서 공차로 지정된다. 이러한 형상 오차나 공차를 갖는 부품들이 조립시 가질수 있는 위치와 방향의 허용영역을 구한여 조립성을 판단할 수 있다. 조립성이란 주워진 위치에서 조립이 가능한 가 하는것과 조립경로가 존재하는 가 하는 것 이다. 본 연구에서는 조립성 확인을 위하여 인터벌 수를 세분하는 방법의 인터벌 분석을 이용한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.10
• /
• pp.1323-1328
• /
• 2011

In the current design process for the lower arm used in automobile parts, an optimal solution of its various design variables should be found through exploration of the design space approximated using the response surface model formulated with a first- or second-order polynomial equation. In this study, a multi-level computational DOE (design of experiment) was carried out to explore the design space showing nonlinear behavior, in terms of factors such as the total weight and applied stress of the lower arm, where a fractional-factorial orthogonal array based on the artificial neural network model was introduced. In addition, the tolerance robustness of the optimal solution was estimated using a tolerance optimization with six sigma constraints, taking into account the tolerances occurring in the design variables.

• Korean Journal of Optics and Photonics
• /
• v.13 no.1
• /
• pp.51-57
• /
• 2002

We have calculated the optimum refractive index and normalized thickness of a single layer antireflection coating on the facet of buried channel waveguides as a function of waveguide width for several waveguide depths using the angular spectrum method and field profiles obtained by the effective index method (EIM) and the variational method (VM), respectively, and discussed the results. In the area of large waveguide width, the optimum parameters of a single layer antireflection coating obtained by both methods are almost the same. However, as waveguide width decreases, the parameters obtained by the VM approach those of a single layer antireflection coating between cladding layer and air, while those obtained by the EIM do not approach those, and the difference between the two parameters is large. The tolerance maps of the quasi-TE and quasi-TM modes obtained by the VM for square waveguides are located in almost the same area regardless of refractive index contrast, while those obtained by the free space radiation mode (FSRM) method for refractive index contrast of 10% are located in the different area. Thus, we think that the tolerance maps obtained by the VM are more exact than those obtained by the FSRM method.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.11
• /
• pp.112-119
• /
• 2002

Generally, it is very difficult to inspect geometric shape of large 2D objects after machining. To maintain the accuracy for inspection, a robot vision is used to divide overall shape into several enlarged images, and image processing technique is applied to acquire one minute geometric contour. The inspection is to compare the NC data with the measured contour data by the vision system, and the algorithm is to rotate to minimize the maximum deviation after coinciding two geometric centers. This paper experimentally shows that the proposed algorithm is very useful for inspection of large machined objects.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.10a
• /
• pp.195-199
• /
• 2008

본 논문은 택시들의 승차율을 높이고 승객들의 대기시간을 최소화하기 위하여 제주 택시들의 이동이력 데이터를 기반으로 하여 공차들을 승객을 만날 가능성이 많은 지역으로 배치하는 기법을 제시한다. 이동이력 데이터에 포함된 공차 보고와 승차 보고 수 사이의 스케일 차이를 극복하기 위하여 전체수와 영역내 합에 대한 비율로 정규화하는 방법을 설명하고 장단점을 분석한다. 또 시간대별, 요일별, 주간별 택시들의 승객 대기시간에 대한 통계 데이터에 기반하여 가장 수요와 공급이 적정하게 유지되는 시간구간을 발견하고 이 구간에 대한 택시 분포와 현재의 택시 분포의 차이에 의해 수요보다 공급이 많은 곳의 택시를 재배치한다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.9
• /
• pp.643-651
• /
• 2001

Fused vertical directional coupler switches (FVCSs) with switching operation induced section (SOIS) and extinction ratio enhanced section (ERES) are proposed. In these FVCSs, switching operation is achieved by changing the refractive indices of both cores in SOIS and improvement of extinction ratios larger than 30dB for both cross and bar states is achieved by controlling the asymmetry of refractive indices between both cores in ERES. In addition, the design guidelines to have high extinction ratios larger than 30dB with large tolerances of the refractive index of cores are presented.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.954-964
• /
• 2015

In this research, an overlapped illumination model was newly proposed for designing a freeform LED lens with a uniform illuminance distribution on its illuminating plane. Based on the proposed model and conventional illumination models, freeform lenses were designed and their performances and tolerances were compared. As a result of the tolerance analysis about thickness change in lens, position, size change, central direction change of light emission and characteristic change in LED source. This proposed model and divergent illumination model are similar to the performance about central direction change of light emission in LED source. but the uniformity illumination value in this proposed model is more remarkably value than it in divergent illumination model about characteristic change in LED source.