• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.311-312
• /
• 2014

이 논문은 본 논문에서는 고효율 통합컨버터(OBC/LDC) 전력회로 개발을 제안한다. 차량용 충전기의 고밀도화와 고효율화 기술을 개발함으로써 EV/PHEV용 고성능 단방향 충전기 기술의 확보를 목표로 하며 LDC와 통합을 할 수 있는 기본 구조를 제시 한다. 또한 본 논문에서는 충전기의 고효율화와 LDC와의 통합에 적합한 회로 구조를 연구하며 DC/DC 컨버터의 연구에 집중 하였다. 신규전력구조 개발을 통한 충전 효율 상승 및 LC공진을 통한 낮은 손실을 갖는 공진형 전력회로 개발을 제안하며 전력변환기의 Digital 제어회로와 Power stage 고효율화 연구를 통한 OBC/LDC 통합 구조개발을 제안한다.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.499-501
• /
• 2008

본 논문은 공진요소를 포함한 고전압 플라이백 컨버터의 설계 절차를 제시하는 것으로써, 고압 플라이백 컨버터 설계 시 기존 플라이백 컨버터의 Power Stage 설계 식을 적용하였을 때 원하는 출력 전압을 얻지 못한다. 고전압을 발생시키기 위한 고전압 플라이백 변압기는 2차 측의 많은 권선수와 높은 전압 때문에 기생 커패시턴스(parasitic capacitance)가 매우 크고, 과도상태에서 컨버터 전류 및 전압의 기생 공진(parasitic resonance)이 심각하게 발생한다. 이러한 공진요소를 고려하여 고전압 플라이백 컨버터의 특성을 해석하고 설계 절차를 제시한다. 이를 통해 고전압 플라이백 컨버터의 소형화 및 경량화를 도모하고, 고압 전원장치의 기술 축적을 위해 연구되었다. 제안된 회로의 동작원리를 설명하고, 타당성을 실험을 통하여 검증한다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.2
• /
• pp.119-125
• /
• 2011

A novel circuit structure of dual-band bandstop filters is proposed in this paper. This structure comprises two shunt-connected tri-section stepped impedance resonators with a transmission line in between. Theoretical analysis from the equivalent circuit and design procedures are described. We represented graphs for filter design from the derived synthesis equations by resonance condition of circuits. Notably, advantages of the proposed filter structure are compact size in design, wide range of realizable resonance frequency ratio, and more realizable impedances.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.6
• /
• pp.477-486
• /
• 2010

Recently, Power Conditioning System (PCS) tends to become more compact, and tends to require higher efficiency, and higher power density with better performance. To meet these requirements, a novel topology consisted of LLC resonant inverter with two resonant tanks for low power losses and Low Frequency (LF) cyclo-converter for sine wave filtering is proposed. The operating schemes are analyzed and described. A 400W proto product is built, tested and verified the performances by connecting the 110Vac 60Hz utility line.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.303-304
• /
• 2013

기술이 발전함에 따라 전력변환기의 소형화 고효율화가 요구되어지고, 이를 위해 고주파 스위칭 전력변환기가 필요로 하게 된다. 하지만 스위칭 주파수와 비례적으로 스위칭 손실이 증가하기 때문에 시스템의 효율이 감소한다. 이러한 문제를 해결하기 위해 DCM방식이나 공진을 이용한 ZVZCS(Zero-Voltage Zero-Currrent) 컨버터가 제안되고 있으나 소자의 정격용량이 커지는 단점을 갖는다. 또한 ZVT(Zero-Voltage Transition)를 포함한 소프트 스위칭 기법을 적용하는 다양한 컨버터가 제안되고 있으나 공진전류의 첨두에서 보조스위치가 스위칭을 하게 되어 보조스위치 스위칭 손실이 큰 단점이 있다. 본 논문에서는 변압기로 공진인덕터의 전압을 제한시켜 보조 스위치가 영전압/영전류 스위칭을 하게 함으로서 스위칭 손실을 발생시키지 않는 소프트 스위칭 구조를 제안한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.11
• /
• pp.1082-1089
• /
• 2004

In this paper, miniaturization of an elliptic-response open-loop resonator filter and design flexibility using similarity transformation of the coupling matrix are proposed. Moreover, the filter with wider fractional bandwidth is designed by the proposed method. In order to verify the proposed method, three 4th-order elliptic-response open-loop resonator filters with a relative bandwidth of 4 % at the center frequency of 2.0 GHz are designed. One is realized with constant-width microstrip line resonator and the others are implemented with different-width microstrip line resonator. Compared with the former one, the latter have shown the size reduction of 13 % and 25 %, respectively. Since it may not be possible to implement the resonators with very narrow spacing for the required coupling coefficient filters with two different configurations representing same response characteristic through similarity transformation of the coupling matrix are proposed. From this design flexibility, a filter with a relative bandwidth of 8 % at the center frequency of 2.0 GHz is designed with realizable design parameters.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.12
• /
• pp.175-180
• /
• 2010

In this paper, we have investigated ultrahigh frequency nano-mechanical resonators, made of DWCNTs with various wall lengths, via classical molecular dynamics simulations. We have aimed our analysis on the frequency variations of these resonators with the DWCNT wall lengths. The results show that the variations can be well fitted by either the Pearson VII function when the resonant frequency of normalized by its maximum frequency is plotted as a function of the inner/outer wall length ratio L5/L10 for different values of the outer wall length L10, and the Gauss distribution function when the resonant frequency of normalized by its maximum frequency is plotted as a function of the outer/inner wall length ratio for different values of the inner wall length.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.4
• /
• pp.16-21
• /
• 2017

In this paper, a Small-sized and planer resonator design of Magnetic Resonance - Wireless Power Transfer(MR-WPT) were proposed for practical applications of mobile devices, such as a laptop, a smart-phone and a tablet pc. The proposed MR-WPT system were based on four coil MR-WPT and designed as a transmitter part (Tx) and a receiver part (Rx) both are the same shape with the same loop and resonator. There are four different spiral coil type of resonators with variable of line length, width, gap and turns in $50mm{\times}50mm$ size. The both of top and bottom side of substrate(acrylic; ${\varepsilon}_r=2.56$, tan ${\delta}=0.008$) ere used to generate high inductance and capacitance in limited small volume. Loops were designed on the same plane of resonator to reduce their volume, and there are three different size. The proposed MR-WPT system were fabricated with two acrylic substrate plane of Tx and Rx each, the Rx and Tx loops and resonators were fabricated of copper sheets. There are 12 combinations of 3 loops and 4 resonators, each combination were measured to calculate transfer efficiency and resonance frequency in transfer distance from 1cm to 5cm. The measured results, the highest transfer efficiency was about 70%, and average transfer efficiency was 40%, on the resonance frequency was about 6.78 MHz, which is standard band by A4WP. We proposed small-sized and planer resonator of MR-WPT and showed possibility of mobile applications for small devices.

• Journal of the Korean Society for Railway
• /
• v.20 no.3
• /
• pp.329-338
• /
• 2017

A recent trend of technical development in auxiliary-power-supplies (APS) is to replace 60Hz low frequency transformers with isolated type dc/dc converters. This paper introduces the technical trend in APS structures and proposes a power converter circuit suitable for high-efficient and light-weight APS. By utilizing the resonant converter, which achieves ZCS, to reduce switching losses, various types of APS structures (1-stage and 2-stage) are reviewed, and they are verified by simulation. The full-bridge resonant LLC converter is designed with a 1-stage power converting structure; the resonant converter topology is designed with a 2-stage power converting structure that has a pre-regulator converter to compensate for the wide input voltage range. Both a step-down converter and a step-up converter are designed and compared for the pre-regulator in the 2-stage structure. Operational characteristics are compared with simulation results and loss analyses are presented to proposes appropriate system structure and topologies.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.939-947
• /
• 2001

This paper presents the penetrated electric fields and resonant frequencies inside a metallic enclosure with aperture excited by an external dipole source. In the theoretical analysis, integral equations for the current distribution and electric field distributions on the aperture are solved by applying Galerkin\`s method of moments. The results show that the electric fields inside metallic enclosure is maximum at the near the aperture and resonant frequencies are the same as calculated of the enclosure without aperture. To verify the theoretical analysis the electric field inside enclosure and resonant frequencies are compared with the experimental results.