• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.2
• /
• pp.291-304
• /
• 1999

In this work, a mathematical modeling of SAW coupled mode in SAW resonator filter, which is very useful in analyzing the characteristics of periodic electrode structure such as SAW reflective array and inter-digital transducers. was considered by mathematical analytic approach. The design and simulation method for resonator filter was also proposed by equivalent transduction matrix using this mathematical modeling. In order for a designer to simulate, and to design the coupled mode SAW resonator filters effectively that could be applied to mobile communication system, a design simulator for coupled mode filter was implemented by graphic user interface, and it was investigated by designing and analyzing practical SAW coupled mode resonator filter from a view point of application of this simulator.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.133.1-133.1
• /
• 2014

이 발표에서 우리는 수백 나노미터 크기인 두 개의 나노 금속 원반 또는 나노 블록이 백 나노미터 이하의 간격으로 결합된 초미세 이중 금속 플라즈몬 광공진기를 제안하고 그 응용을 살펴본다. 원반구조 경우, 반지름이 476 nm인 나노원반 두 개가 100 nm 두께의 유전체 원반의 양쪽에 위치하여 1550 nm 공진파장을 가진 표면 플라즈몬 whispering-gallery-mode (WGM)을 유전체 내에 형성한다. 유전체의 두께를 일정하게 유지할 경우, WGM의 공진파장은 원반의 반지름에 따라 줄어든다. 반면, 반지름이 일정할 때에는 두 금속 원반 사이의 유전체 두께가 줄어듦에 따라 두 금속 원반 사이에 작용하는 표면 플라즈몬의 결합이 강해져서 공진파장이 길어진다. 따라서, 일반적으로 공진기의 크기가 줄어듦에 따라 공진파장이 짧아지는 것과 달리, 제안된 원반구조에서 발생하는 WGM는 원반의 반지름과 유전체의 두께를 함께 줄여도 공진파장이 동일하게 유지되는 차별화된 특성을 가지고 있다. 최종적으로 같은 공진파장을 가지는 WGM를 반지름 88 m, 유전체 두께 10 nm의 공진기에서도 여기시킬 수 있음으로, 모드부피(V)를 1/160으로 줄일 수 있다. 이에 비해, 공진모드의 품위값(Q)은 증가된 금속의 흡수손실에 의해 1/3정도 줄어듦으로써, 공진기와 물질의 상호작용 정도를 보여주는 Q/V값은 크기가 줄어든 공진기에서 오히려 50배 가량 증가함을 확인할 수 있다. 이 같은 초미세 플라즈몬 공진기는 매우 작은 굴절율 센서로서 응용을 가지고 있으며, 1160 nm/(단위 굴절율 변화)의 높은 민감도를 보인다. 한편, $200{\times}150{\times}100nm3$의 크기를 가진 두 개의 금속 나노블록이 10 nm의 공기 간격을 가지고 결합된 나노 공진기는, 공기 간격 내에 강하게 집적된 838 nm의 공진파장을 가진 플라즈몬 공진기 모드를 여기시킨다. 제안된 공진모드는 공기간격이 줄어듦에 따라 공진파장이 급격하게 증가하는 특성을 가지므로 옹스토롬 정도의 분해능을 가진 두께 변화 센서로 응용할 수 있다. 예를 들어, 공기간격 2 nm에서는 1A 두께 변화에 대해 공진파장 변화는 약 40 nm로 매우 민감하게 변화한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.273-279
• /
• 2013

In this paper, a novel split ring resonator is proposed for improvement of phase noise characteristics that is weak point of oscillator using planar type microstrip line resonator, and oscillator for 5.8GHz band is designed using proposed split ring resonator. At the fundamental frequency of 5.8GHz, 7.22dBm output power and -83.5 dBc@100kHz phase noise have been measured for oscillator with split ring resonator. The phase noise characteristics of oscillator is improved about 9.7dB compared to one using the general ${\lambda}$/4 microstrip resonator. Because it is possible that varactor diode or lumped capacitor is placed on the gaps of split ring resonator, resonant frequency can be controlled by bias voltage. We can design voltage controlled oscillator using proposed split ring resonator. Thus, due to its simple fabrication process and planar type, it is expected that the technique in this paper can be widely used for low phase noise oscillators for both MIC and MMIC applications.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.4
• /
• pp.201-208
• /
• 2013

This paper is a study of an empirical design of an open-ended coaxial cavity resonator. It can be done by using the radius of the inner conductor, the inner radius and the length of the resonator. However, the basic coaxial transmission -line theory can be seen that the characteristics of the resonant frequency and the Q value are varied by the change of length, regardless of the value of radius of the inner conductor and inner radius of the resonator. We find out the impact of radius of the inner conductor, inner radius of the resonator and the length of the resonator parameter and propose the optimized empirical resonator design method by reducing the error between the theoretical value and the design value. Based on the simulation, several resonators are fabricated by the size of 14 mm for the radius of inner conductor, 2 mm, 5 mm, 10 mm respectively for the inner radius of resonator, and 8.5 mm for the length of the resonator. The resonant frequencies of the produced resonators were measured at 6.1, 5.7, 6.5 GHz respectively. According to the result of simulation and measurement, we know that we can design the relatively exact open-ended coaxial cavity resonator by applying the basic coaxial transmission-line theory directly when the length of the resonator is less than 10 mm, and adding the correction factor of 0.5 GHz to the calculated resonant frequency in case of more than 10 mm of the length of the resonator.

• Journal of Advanced Navigation Technology
• /
• v.25 no.1
• /
• pp.90-95
• /
• 2021

In this paper, the design method for a high-sensitivity compact resonator for chipless RFID tags is proposed. Proposed high-sensitivity compact resonator uses an interdigital-capacitor structure instead of a capacitor-shaped strip structure in a conventional ELC resonator. The length of the electrode plate of the IDC structure is longer than that of the conventional capacitor-shaped structure, resulting in a larger equivalent capacitance of the resonator. This can lower the resonant peak frequency of the RCS characteristic. Two resonators with the same length of the square loop and the width of the strip are fabricated on an RF-301 substrate with a thickness of 0.8 mm. The experiment results show that the resonant peak frequency and value of the bistatic RCS for the ELC resonator were 4.305 GHz and -30.39 dBsm, whereas those of the proposed IDC resonator were 3.295 GHz and -36.91 dBsm. Therefore, the size of the resonator is reduced by 23.5% based on the measured resonant peak frequency of the RCS characteristic.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.1
• /
• pp.67-72
• /
• 2019

In this study, we investigate the echo reduction performance of miniaturinzed Helmholtz resonators using smaller than wavelength acoustic metamaterial structures. The Helmholtz resonators are formed using air structures which exhibit large impedance mismatch with the surrounding underwater environment. Using the multi-physics software package, we find that significant reduction in the sonar signature is expected and frequency tailoring is possible by controlling the degree of space coiling and inner volume of the resonators. We find that for the basic Helmholtz resonators, up to 7 dB reduction in echo is expected at 10,000 Hz while when the miniaturized Helmoholtz resonators are used, up to 14 dB reduction in echo is expected at 5,000 Hz. In addition, frequency tailoring is demonstrated by varying the internal volume of the Helmholtz resonators and broadband characteristic is shown using superposition of various degree of space coiled structures. Through this study we investigate the effectiveness of the miniaturized Helmholtz resonators formed using air structures and the echo reduction results show promisses in the application of achieving underwater stealth.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.6
• /
• pp.653-658
• /
• 2015

In this paper, the Square Split Ring Resonator(: SRR) of Defected Ground Structure(: DGS), applicable to MMIC(: Monolithic Microwave Integrated Circuit) design, is proposed. The mathematical method to solve the equivalent parameter of the resonator from the measured results of resonator is introduced in this paper. To verify the method, SRR-DGS resonator with 2.95 GHz center frequency is fabricated, for measuring characteristics and calculating the equivalent parameter. The result from this process is compared with the data of the ADS simulation, and as a result both were identical.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.1
• /
• pp.14-19
• /
• 2003

In this paper, a λ/4 hair-pin resonator is proposed to reduce the size of resonators. A LTCC MLC bandpass filter is designed using the λ/4 hair-pin resonators. The electromagnetic coupling structure between two planar resonators is analysed. The equivalent circuit is derived to explain the behavior of the LTCC MLC bandpass filter using λ/4 hair-pin resonators. A design procedure is also described. The simulated and measured results of 1.8 GHz band 2-pole bandpass filter are presented.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.250-256
• /
• 2008

In this paper, an X-band oscillator is presented using a new miniaturized microstrip hairpin resonator. The newly designed hairpin resonator on the microstrip line employs the spiral structure, which shows a higher loaded quality factor and the 50 % reduced circuit area compared to the conventional one at 9.2 GHz. The oscillator using proposed resonator shows the output power of 10.87 dBm, the second harmonic suppression of 41.99 dBc, and the phase noise performance of -101.49 dBc/Hz at 100 kHz offset, which is better than the conventional resonator oscillator by 6.17 dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.3
• /
• pp.343-354
• /
• 2012

In this paper, various spiral zeroth-order resonators are proposed for wireless power transmission. Since a zerothorder resonance(ZOR) mode of meta-material transmission lines has the characteristic of an infinite wavelength, its frequency is independent of physical length. Also, to obtain high transmission efficiencies high-Q resonators and strong coupling coefficient between coupled resonators are required. Therefore, the resonators consist of spiral inductor and lumped capacitor to use the ZOR mode and they are optimized via parametric study and circuit analysis for a high-Q resonator design. The optimized resonators are simulated and compared with a conventional spiral resonator and one of them was fabricated and measured. The fabricated one has a dimension of $20cm{\times}20cm{\times}8cm$($0.009{\lambda}_0{\times}0.009_{\lambda}_0{\times}0.004{\lambda}_0$) and the transmission efficiency of 80 % is measured at 13.56 MHz at transmitted distance of 40 cm.