• Journal of vocational education research
• /
• v.37 no.4
• /
• pp.1-22
• /
• 2018

The study tried to investigate the school curriculum organization and teacher's perceptions about test subjects in vocational education division of the college scholastic ability test based in the 2015 revised national curriculum. This study asked vocational teachers to fill in basic questionnaire that consists of 9 relevant and subjective items for the school curriculum organization and test subjects in vocational education division of the college scholastic ability test based in the 2015 revised national curriculum. For this, the survey was conducted 58 schools of 92 schools in technical specialized high schools, meister high schools and vocational high schools about test subjects of 2015 revised national curriculum. As a result, the 'Successful career life' subject was 53.5%, the most organized in the first grade. 'test course 1' was 55.2% and 'test course 2' was 72.4% the most organized in the first grade. The Opinions on the test courses were the highest in the two subjects in the same series as the present. The teacher's perceptions showed that the current test subjects in vocational education division of the college scholastic ability test are valid. The most important factor affecting difficulty was 'The Ministry Education's policy' in vocational education division of the college scholastic ability test.

• Applied Chemistry for Engineering
• /
• v.10 no.7
• /
• pp.990-995
• /
• 1999

To determine the effect of chemical structure of linear amine curing agents on thermal and mechanical properties, standard epoxy resin DGEBA was cured with ethylene diamine(EDA) and hexamethylene diamine(HMDA) in a stoichiometrically equivalent ratio. From this work, the effect of linear amine curing agents on the thermal and mechanical properties is significantly influenced by the chemical structure or chain length of curing agents. In contrast, the results show that the DGEBA/EDA system having the two carbons had higher values in the thermal stability, maximum conversion of epoxide, density, glass transition temperature, tensile modulus, flexural strength, and flexural modulus than the DGEBA/HMDA system having the six carbons, whereas the DGEBA/EDA cure system had relatively low values in the shrinkage(%), thermal expansion coefficient, tensile strength, and had similar values in the maximum exothermic temperature, and conversion of epoxide compared to the DGEBA/HMDA cure system. This findings indicate that packing ability in the HMDA structure affects the thermal and mechanical properties.

• Applied Chemistry for Engineering
• /
• v.26 no.5
• /
• pp.615-620
• /
• 2015

Polypropylene (PP)/bamboo fiber (BF) composites were fabricated by twin screw extruder in order to investigate effects of the compatibilizer on physical properties of PP/BF composites. The content of BF changed from 10 to 25 wt% and that of the compatibilizer was fixed at 3 wt%. Maleic anhydride grafted PP (PP-g-MAH) was used to increase the compatibility between PP and BF as a compatibilizer. Chemical structures of the composites were confirmed by the existence of carbonyl group (C=O) stretching peak at $1,700cm^{-1}$ in FT-IR spectrum. Considering the degradation and mechanical properties, the optimum extrusion conditions were selected to be $210^{\circ}C$ and 100 rpm, respectively. There was no distinct changes in melting temperature of the composites, but the crystallization temperature increased by $10-20^{\circ}C$ owing to the heterogeneous nuclei of BF. It was checked that the optimum BF content was in the range of 15-20 wt% from the results of tensile and flexural properties of the composites. The effect of the compatibilizer on mechanical properties was confirmed by SEM images of fractured surface and contact angles.

• Applied Chemistry for Engineering
• /
• v.30 no.6
• /
• pp.681-686
• /
• 2019

In this work, the effect of the culture medium composition on microbial growth and ethanol production in Clostridium autoethanogenum culture was investigated to enhance the ethanol productivity. D-Ca-pantothenate, vitamin B₁₂ (as vitamins), and sodium sulfide (as sulfur source) were selected as examined components, and the effects of components' concentration on cell growth and ethanol production was investigated. For D-Ca-pantothenate concentrations varing from 0.5, 5, 50 and 500 mg/L, a slight increase in the ethanol production was observed at the 0.5 mg/L, but negligible differences in microbial growth and ethanol production were measured for the concentration ranges examined. The effect of vitamin B₁₂ concentrations from 0.1, 1.0, 10, and 100 mg/L on the microbial growth and ethanol production was investigated, and it was found that the ethanol production using a 0.1 mg/L of vitamin B₁₂ concentration increased by 245% compared to that of using the basic medium concentration (10 mg/L). The effect of sodium sulfide concentrations (0.5, 5, and 10 g/L) on the microbial growth and ethanol production was also studied, and the inhibition of microbial growth was observed when the sodium sulfide usage was over 0.5 g/L. In conclusion, changes in D-Ca-pantothenate and sodium sulfide concentrations did not affect the ethanol production, whereas even a 100 times lower concentration of vitamin B₁₂ than that of the basic medium improved the production.

• Applied Chemistry for Engineering
• /
• v.31 no.4
• /
• pp.423-428
• /
• 2020

In this work, we investigated the effect of the concentration of medium components on microbial growth and ethanol production in order to improve ethanol productivity in the Clostridium autoethanogenum culture process using syngas as a sole carbon source. Molybenum, nickel and cobalt (as heavy metal ions) were selected as examined components, and the effects of components concentration on the cell growth and ethanol production was examined. Among molybdenum concentrations of 0, 0.001, 0.01 and 0.1 g/L. a slight increase in ethanol production was observed at 0.001 g/L, but significant differences in the microbial growth and ethanol production were not observed in the examined concentration range. In the case of nickel concentration of 0, 0.001, 0.01 and 0.1 g/L, the change in the microbial growth and ethanol production was investigated, and it was found that the ethanol production using 0.001 g/L increased by 26% compared to that of using the basal medium concentration (0.01g/L). The effect of cobalt concentrations (0, 0.018, 0.18 and 1.8 g/L) on the microbial growth and ethanol production was also investigated, and the inhibition of microbial growth was observed when the cobalt usage was over 0.18 g/L. In conclusion, cobalt did not show any further improvement of ethanol production by changing concentration, however, molybdenum and nickel showed increases in the produced ethanol concentration compared to that of using 1/10 times of the basal medium concentration.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.5 no.4
• /
• pp.83-93
• /
• 1994

1886년 고트리브 다이믈러와 칼 벤즈가 가솔린 자동차를 개발한 이후 100여년이 지난 지금 자동차는 비약적으로 진보, 발전하여 현대 산업사회와 개인의 생활에 있어 산업운송수단과 이동수단으 로서 필요불가결하게 되어 밀접한 관계를 갖고 있다. 우리나라 자동차 공업의 역사는 자동차가 사회적, 경제적 효용에 따라 그 생산과 보유대수가 날이 갈수록 증가 일로에 있으며, 자동차의 생산대수는 전세 계에서 년간 약 50,606천대('94년)로서 중요한 국가 기간 산업으로 자리하고 있다. 한편 전기, 전자공업의 발전에 따른 자동차의 Car Electronics가 많이 채용되게 됨에 따라 현재의 자 동차에는 대부분이 전자제어 System으로 구성되어 있다. 최근에는 Micro Processor를 이용한 전자부품이 많이 사용되어 전자파에 대한 문제가 다양하게 발생 하고 있다. 예를 들면 미국 캘리포니아주에서 전자점화제어장치와 연료분사 장치를 설치한 구미의 자동 차가 주행중 28MHz, 28W의 아마추어 무선을 탑제한 자동차가 통과할 때 엔진이 고르지 못한 보고가 있 었고, 화학섬유로된 옷을 착용한 전자부품이 다른 부품에 영향을 주는 사례가 맣아지고 있다. 따라서 자동차에는 여러가지의 전장품, 전자기기를 탑재하기 때문에 자동차 자체에서 발생하는 것과 외부로 부터 받는 전자장해 EMI(Electromagnetic Interference), EMS(Electromagnetic Susceptibility) 가 문제로 되어 자동차 및 부품 maker에 의한 EMC(Electromagnetic Compatibility) 평가의 중요성이 고조되고 있다. 차제무전기, 차제무전기, Car-Radio는잡음방해를 많이 받기도 하지만, 잡음원이 되기 도 한다. 또한 Engine 제어, 차속제어, Brake 제어등에 이용되는 전자제품은 방해에 의한 오동작 또는 파괴가 발생하여 주행기능, 안전성에 문제가 야기되지 않도록 해야 한다. 이러한 전자기 환경은 모두 RF(Radio Frequence)와 자동차에서의 전자파 장해 문제의 원이 될 수 있다. 자동차 및 그 부품의 전자기 방해에 관한 규격화는 1987년부터 괄목할 만하게 진행되어 이에 따른 규제 움직임이 IEC(International Electrotechnical Commission: 국제전기기술위원회) 산하의 하부기 구인 CISPR(International Special Committeeon Radio Interference: 국제 무선 장해 특별위원회)가 전자기 방해파에 대한 측정법 통일안을 제안 하였고, ISO(International Standardization Organiza- tion: 국제표준화 기구) 가운데 TC 22/SC3가 자동차의 전장품에 대한 장해를 논의히고 있다. 특히, 자동차의 EMC에 관한 국가 규격은 국제 규격에서 저술한 바와 같이 특별히 규정된 것이 없고 VDE(Verband Deutscher Elektrotechniker: 서독전기기술 협회)와 SAE(Society of Automotive Engi- neers: 자동차 기술자 협회)에서 비교적 활발하고 Jaso(Japanese Automobile Standards Organization: 일본 자동차 표준협회)에서 많이 진행중에 있다. 본 고에서는 자동차의 전자제어에 따른 잡음 발생 요인과 전자파 간섭 관련 자동차 규격과 시험평가 방법에 대해 간단히 소개 하였다.

• Tuberculosis and Respiratory Diseases
• /
• v.47 no.6
• /
• pp.817-823
• /
• 1999

Background: The prevalence of allergic disease has increased substantially over the past decades. The reasons for these trends are complex but include increased environmental allergen exposure. Environmental control measures are of particular importance in the prevention and management of allergic disease. Thus, we purposed to evaluate the changes of causative allergens in allergic patients in Chonbuk provincial area that began industralized recently. Method: To evaluate the allergens epidemiologically, we performed skin prick tests and RAST in 201 allergic patients from February, 1984 to February, 1985 and 339 patients from February, 1997 to February, 1998. Results: The Following results were obtained. 1) Total sensitization rates did not change significantly(74.2% vs 75.8%, p=0.664). 2) Positive reaction rates to pollens were similar(35.8% vs 30.1%, p=0.17). 3) Positive rates to HDM(house dust mite) were decreased(66.1% vs 56.3%, p=0.02). 4) Positive rates to fungi and animal danders were decreased significantly(p<0.001). Conclusion : Environmental allergens associated with hygine in Chonbuk provincial areas such as HDM and fungi are decreased significantly during 13 years.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.7 no.3
• /
• pp.145-162
• /
• 1974

시판되는 굴, 담치, 백합 등 패류는 깨끗한 수역에서 생산되어야 한다는 것은 공중보건상 매우 중요하다. 따라서 이들 서식해역에 대한 위생상태를 평가하는 것은 패류위생관리에 있어 가장 기본적인 일이다. 본 조사는 미국 Alabama주 West Fowl River 지역에 있어 패류위생관리상 양식장의 등급분류와 관련한 굴(Crassostrea virginica) 및 그 서식수의 위생학적 성상을 알기 위하여 실시되었다. 이 연구는 미국 국제개발처(AID) 연수계획에 의하여 이루워 졌음을 밝혀 둔다. 조사지역에 있어서의 감염원은 가옥, 소업체, 가축, 물새, 야생동물 등에 의한 일반적인 발기물과 배설물로 되어 있고 특별한 하수나 공업배출물은 없었다. 이 조사는 이 지방에 있어 건조기인 10월에 실시되었으며 조사기간중의 총 강우양은 0.08mm, 평균 기온은 $21.3^{\circ}C$, 바람은 동풍이 우세하였다. 저질은 뻘로 되어 있고 저호시 평균수침은 약 1m이며 조사기관중 평균 수온은 $26.0^{\circ}C$였다. 염분은 조사지점에 따라 상이하였으며 바다로 향한 강의 흐름에 따라 증가하고 평균 염분은 $18.0\~28.7\%$의 범위에 있었다. 해수 및 굴 양자의 Coliform 함양은 Fecal coliform 보다 시종 높았으며 Coliform 및 Fecal coliform의 수는 바다로 향한 강의 흐름에 따라 점차 감소하였다. 이것은 해수의 오염은 주로 지표수의 유입에 의한다는 것을 말하고 있다. 굴의 Coliform 및 Fecal coliform MPN은 해수의 그것보다 $11\~12$배 높았다. 조사수역에 설정한 7개소 Sampling station 중 오직 Station 7만이 패류양식장 허가해역의 세균학적 수질기준에 합당하였으며 굴의 Fecal coliform MPN은 시판용 패류의 세균학적 기준을 초과하고 있었다. EC test 양성시험관에서 분리된 세균의 $97.6\%$가 E. coli group로 나타나 EC test는 Echerichie Coli 시험에 매우 효과적인 방법임을 알 수 있다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.5
• /
• pp.537-543
• /
• 2012

In this study, we experimentally investigate a noise mechanism related to the machining accuracy of the reducer in the driving state. We fabricate a planetary reducer and four types of gears for use in the planetary reducer. We use signal analysis to determine the noise and vibration of the reducer at different motor speeds; the motor speed is increased from 0 rpm to the maximum speed in a stepwise manner. In addition, we obtain the sound level by using a sound level meter. The machining accuracy of gears is evaluated by public organizations, Korea Testing Laboratory (KTL), on the basis of the Japanese Industrial Standard (JIS). We analyze and compare the results with the noise and vibration of the reducer.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.5
• /
• pp.49-56
• /
• 2022

In this study, numerical simulations for reducing noise between floors in an apartment building was carried out using Active Noise Control (ANC) technology. In order to examine the feasibility of using ANC to reduce noise between floors, accelerometers and microphones for noise collection were installed in the inter-floor noise test facility to measure noise and vibration caused by the impact ball drop test. By using the measured data, Filtered-x Least Mean Square (Fx-LMS) algorithm-based ANC simulations were carried out. In the simulations, after deriving optimal simulation conditions including the adaptive control convergence coefficient, the noise reduction effect was analyzed through numerical simulations using the number of installed accelerometers and speakers as variables. Finally, it was confirmed that the noise between floors could be reduced using ANC technology under limited conditions.