• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.4
• /
• pp.255-262
• /
• 2018

In order to determine the three-dimensional position in photogrammetry, a spatial resection is a pre-requisite step to determine exterior orientation parameters. The existing spatial resection method is a non-linear equation that requires initial values of exterior orientation parameters and has a problem that a gimbal lock phenomenon may occur. On the other hand, the spatial resection using quaternion is a closed form solution that does not require initial values of EOP (Exterior Orientation Parameters) and is a method that can eliminate the problem of gimbal lock. In this study, to analyze the stability of the quaternion-based spatial resection, the exterior orientation parameters were determined according to the different layout of control points and were compared with the determined values using existing non-linear equation. As a result, it can be seen that the quaternionbased spatial resection is affected by the layout of the control points. Therefore, if the initial value of exterior orientation parameters could not be obtained, it would be more effective to estimate the initial exterior orientation values using the quaternion-based spatial resection and apply it to the collinearity equation-based spatial resection method.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.6
• /
• pp.465-472
• /
• 2019

The SPR (Single Photo Resection) is widely used as a method of estimating the EOPs (Exterior Orientation parameters) at the time of taking a photograph, but it requires an initial value and has a disadvantage of being sensitive to the initial value. In this study, we introduce quaternion-based single photo resection and PnP (Perspective-n-Point) algorithm that do not require initial values and compare the results. Photos were taken using a general smartphone, and the ground control point acquisition was based on the hybrid MMS (Mobile Mapping System) point cloud data possessed by the researchers. As a result, when the collinear condition based SPR is true value, quaternion-based SPR has higher attitude angle estimation accuracy than PnP algorithm. In case of camera position estimation, both algorithms showed accuracy within 0.8m when compared with ground control points.

• Bulletin of the Korean Space Science Society
• /
• 2010.04a
• /
• pp.38.1-38.1
• /
• 2010

고해상도 위성들로부터 최상의 영상을 획득하기 위해서는 설계 단계에서 운용 조건이 반영된 위성 영상 품질 예측이 필수적이다. 이 발표에서는 실질적인 위성 궤도 및 자세 정보와 정사영상, DEM(Digital Elevation Model)으로부터 공선조건식을 기반으로 하는 Direct Sensor Modeling을 이용하여 고해상도 가상영상을 생성하는 방법을 제시하였다. Target으로 사용된 정사영상은 $19951\times21055$ size의 USA Wisconsin주의 1m 해상도 영상이며, 이 영상으로부터 0.7m 해상도의 가상영상을 생성하였다. 이 연구를 통하여 위성의 설계 단계에서 궤도상 영상 품질 예측할 수 있으며, 운영 과정에서는 실제 촬영된 영상과 비교 분석을 통하여 위성 및 탑재체의 상태 파악 및 보정이 가능할 것으로 기대된다.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.410-416
• /
• 2001

An algorithm of 3-D particle image velocimetry(3D-PIV) was developed for the measurement of 3-D velocity field of complex flows. The measurement system consists of two or three CCD camera and one RGB image grabber. In this study, stereo photogrammetty was applied for the 3-D matching of tracer particles. Epipolar line was used to decect the stereo pair. 3-D CFD data was used to estimate algorithm. 3-D position data of the first frame and the second frame was used to find velocity vector. Continuity equation was applied to extract error vector. The algorithm result involved error vecotor of about 0.13 %. In Pentium III 450MHz processor, the calculation time of cross-correlation for 1500 particles needed about 1 minute.

• Tunnel and Underground Space
• /
• v.13 no.6
• /
• pp.486-494
• /
• 2003

When the orientations of joints are measured on a rock exposure, there are frequent cases that are difficult to approach by the surveyor to the target joints or to set up scanlines on the slope. In this study, to complement such limit and weak points, a new algorithm was developed to interpret joint orientation from analyzing the images of rock slope. As a method of arranging the multiple images of a rock slope, the multistage convergent photographing system was introduced to overcome the limitation of photographing direction which existing method such as parallel stereophotogrammetric system has and to cover the range of image measurement, which is the overlapping area between the image pair, to a maximum extent. To determine camera parameters in the perspective projection equation that are the main elements of the analysis method, a new method was developed introducing three ground control points and single ground guide point. This method could be considered to be very simple compared with other existing methods using a number of ground control points and complicated analysis process. So the global coordinates of a specific point on a rock slope could be analyzed with this new method. The orientation of a joint could be calculated using the normal vector of the joint surface which can be derived from the global coordinates of several points on the joint surface analyzed from the images.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.4
• /
• pp.295-303
• /
• 2018

The stereo camera system has a fixed baseline and therefore has a constant scale. However, it is difficult to measure the actual three-dimensional coordinate since the scale is not fixed when relative orientation parameters are determined through the key-point matching in the stereo image each time. Therefore, the purpose of this study was to perform the stereo camera calibration that simultaneously determines the internal characteristics of the left and right cameras and the camera relationship between them using the modified collinearity equation and compared it with the two independent single cameras calibration. In the experiment using the images taken at close range, the RMSE (Root Mean Square Error) of ${\pm}0.014m$ was occurred when the three dimensional distances were compared in the single calibration results. On the other hand, the accuracy of the three-dimensional distance of the stereo camera calibration was better because the stereo camera results were almost no error compared to the results from two single cameras. In the comparison of the epipolar images, the RMSE of the stereo camera was 0.3 pixel more than that of the two single cameras, but the effect was not significant.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.507-510
• /
• 2002

An algorithm of 3-D particle image velocimetry(3D-PIV) was developed for the measurement of 3-D velocity Held of complex flows. The measurement system consists of two or three CCD camera and one RGB image grabber. Flows size is $1500{\times}100{\times}180(mm)$, particle is Nylon12(1mm) and illuminator is Hollogen type lamp(100w). The stereo photogrammetry is adopted for the three dimensional geometrical mesurement of tracer particle. For the stereo-pair matching, the camera parameters should be decide in advance by a camera calibration. Camera parameter calculation equation is collinearity equation. In order to calculate the particle 3-D position based on the stereo photograrnrnetry, the eleven parameters of each camera should be obtained by the calibration of the camera. Epipolar line is used for stereo pair matching. The 3-D position of particle is calculated from the three camera parameters, centers of projection of the three cameras, and photographic coordinates of a particle, which is based on the collinear condition. To find velocity vector used 3-D position data of the first frame and the second frame. To extract error vector applied continuity equation. This study developed of various 3D-PIV animation technique.

• Korean Journal of Remote Sensing
• /
• v.14 no.1
• /
• pp.69-82
• /
• 1998

SAR imagery can overcome the limitations of electro-optical sensor imagery and provide us Information which plays a supplementary role. But it is necessary to remove a variety of geometric errors in SAR imagery. An accurate geometric correction of SAR imagery is not easy task to achieve, though some techniques and theories are introduced. We also have difficulties such as transformation problem between 'International' ellipsoid in Radarsat system and 'Bessel' ellipsoid. Two widely used correction method, one is made by simulated image, and the other by collinearity equation, usually use DEM. In this study, the merits and demerits of geocoding methods respectively and the effective method for Korean terrain were found.

• Proceedings of the KSRS Conference
• /
• 2009.03a
• /
• pp.35-38
• /
• 2009

본 논문은 KOMPSAT-2, KOMPSAT-3 등과 같은 고해상도 위성영상의 정사보정 방법과 그에 따른 시험용 소프트웨어 개발을 목표로 한다. 정사보정은 위성 카메라의 자세나의 지표의 피복인위에 의하여 발생하는 인위를 제거하여 정사투영 된 특성을 갖는 영상을 구하는 과정을 말한다. 정사보정을 위해서는 위성 카메라의 기하학적인 특성과 지표면의 관계식을 나타내는 공선조건 식으로부터 지상기준점 및 수치표고모델을 통하여 구해진다. 본 논문에서는 고해상도 위성영상의 정사보정 방법을 구현하고, 실제 위성영상 데이터에 적용하여 구현된 소프트웨어의 성능을 평가한다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.4 s.34
• /
• pp.67-73
• /
• 2005

The urbanization of Korea has been rapidly progressed since 1960, but satellite imagery have provided the information only after 1975. Recently released CORONA imagery is one of the few source of satellite image which can provide 1960's topographic information of the Korean Peninsular. It can be applied to change detection in various fields such as urban, forest, and environmental planning. In this research mosaic image of past Korean Peninsular using CORONA imagery in the 1960s were generated. A polynomial equation and a modified collinearity equation were applied for geo-referencing and a comparative analysis was conducted. In this research the 2nd polynomial equations were used for geo-referencing of CORONA imagery. After carrying out geo-referencing, mosaic image was generated using Erdas Imagine. It is assumed that this result image is very useful for various fields such as generation of thematic maps, urban planning, and change detection.