• 한국항공우주학회지
• /
• 제48권8호
• /
• pp.555-563
• /
• 2020

전진익 항공기는 평익 항공기와 비교하였을 때 우월한 공력 특성을 갖고 있다. 그러나 전진익 항공기는 종래의 주익에 비하여 낮은 발산 속도를 갖고 있게 되고, 이는 설계 단계에서 필수적으로 고려하여야 한다. 이러한 문제를 해결하기 위하여 공력탄성학적 테일러링에 대한 연구가 이루어졌다. 적층 판의 최적의 적층 배열을 찾기 위해선 반복적인 계산이 필요하고 이를 위하여 모델링이 용이하고 계산 효율성이 우수한 1차원 보 축소 해석을 수행한다. 해석을 위하여 다물체 동역학 프로그램인 DYMORE를 사용하였고 이를 해석해와 비교하였다. 또한 NACA0015 형상의 다중 셀 구조 단면을 해석하기 위하여 상용 프로그램 VABS를 사용하였고 전진익 항공기의 날개를 보다 현실적으로 해석하기 위하여 oblique 기능을 사용하였다. 공력탄성학적 테일러링을 통하여 얻은 최적의 발산 속도는 238.9m/s이고 이는 기존에 동일 중량, 단일 방향으로 적층한 날개에 비하여 42% 가량 개선된 수치이다. 하지만 공력탄성학적 테일러링이 부주의하게 적용할 경우 기존 단일 적층 날개에 비하여 오히려 감소된 발산 속도를 가질 수 있음을 확인하였다.

• 한국전산유체공학회지
• /
• 제8권4호
• /
• pp.16-25
• /
• 2003

The design method for transonic turbine blades has been developed based on Wavier-Stokes equations. The present computing process is done on the four separate steps, i.e., determination of the blade profile, generation of the computational grids, cascade flow simulation and analysis of the computed results in the sense of the aerodynamic performance. The blade shapes are designed using the cubic polynomials under the control of the design parameters. Numerical methods for the flow equations are based on Van-Leer's FVS with an upwind TVD scheme on the finite volume. In the present study, numerical simulation has been done to investigate the effects of the design parameters on the aerodynamic peformance of the axial-flow turbine blades. Applications are made to the VKI transonic rotor blades. Computed results are analyzed with respect to four parameters and compared with the experimental data.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권2호
• /
• pp.284-291
• /
• 2008

This study presents an aerodynamic design and numerical analysis of a centrifugal compressor in gas turbines for SOFC-gas turbine hybrid system application. Total-to-total pressure ratio of the compressor is 3.6:1 that could be used widely for small and large SOFC-gas turbine systems. The compressor consists of a centrifugal impeller and a wedge diffuser. Conceptual design and aerodynamic design with mean line analysis and quasi-3D analysis are performed, and aerodynamic parameters as well as design variables are discussed from the design results. A numerical analysis based on the Reynolds-averaged Navier-Stokes equation was performed for the flow analysis of the compressor. The results show that the centrifugal compressor designed meets the design target, and the aerodynamic parameters and results of the compressor can be used for the aerodynamic design of centrifugal compressors and the feasibility study of SOFC-gas turbine system design.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.167-173
• /
• 2010

In this study, flow structure in a three-stage centrifugal compressor for LNG Plant with the refrigerant, Propane, was numerically investigated at the design point of the compressor using a commercial code. Flow characteristics in the passages of impeller and vaneless diffuser were analyzed in detail including velocity vector, Mach number and pressure contours in blade spanwise and meridional plane for each stage. The estimation on the one-dimensional output from the preliminary design and three-dimensional shape of the impeller blade was performed through the flow analysis. The verification for designed compressor was carried out from three-dimensional Navier-Stokes analysis. The results will be used as reference data for a new design of 3-D impeller shape to improve propane refrigerant compressor performance.

• 한국전산유체공학회지
• /
• 제22권1호
• /
• pp.103-109
• /
• 2017

The aerodynamic noise reduction of railway traction motor is required to satisfy new enhanced Korean noise regulations for a train. This paper is the study result on a noise reduction of a railway traction motor using Lattice Boltzmann Method(LBM). To verify the reliability of numerical analysis, the noise performance of the base model evaluated using LBM, and calculated result was compared with the experimental data. In addition, main noise sources were selected to design parameters through analyzing the flow field of the base model. Based on the noise sources analysis result, a design improvement model of traction motor for this study was derived to reduce the noise. The performance of a design improvement model was evaluated by applying a validated numerical scheme. As a result, it was confirmed that the noise was reduced due to the suppression of the internal turbulent flow components.

• 한국유체기계학회 논문집
• /
• 제15권6호
• /
• pp.77-84
• /
• 2012

The aerodynamic performance of a single-stage transonic axial compressor was experimentally evaluated by measuring pressure and temperature distribution at the inlet and outlet of the compressor. The compressor was developed by Korea Aerospace Research Institute through multidisciplinary design optimization (MDO) method, especially integrating aerodynamic performance and structural stability. The test results show that the pressure ratio is 1.65 and the efficiency is 85.8 % at design point, where the corrected speed is 22,000 rpm and the corrected mass flow rate is 15.4 kg/s, and it has a good agreement with the design target and computational results. The distribution of pressure ratio is very steep at design speed, compared with the trend of other subsonic compressors. Also the static pressure distribution on the stator casing shows that the blade loading is gradually increasing through the stage as designed.

• 한국유체기계학회 논문집
• /
• 제15권1호
• /
• pp.21-26
• /
• 2012

In this investigation, the aerodynamic performance evaluation of a 1MW class blade has been performed with the purpose of the verification of target output and its clear understanding of flow field using CFD commercial code, ANSYS FLUENT. Before making progress of CFD analysis the HERACLES V2.0 software based on blade element momentum theory was applied for confirmation of quick and approximate performance in the preliminary stage. The blade was designed to produce the target output of a 1MW class at a rated wind speed of 12m/s, which consists of five different airfoils such as FFA W-301, DU91-W250, DU93-W-210, NACA 63418 and NACA 63415 from hub to tip. The mechanical power by CFD is approximately 1.195MW, which is converted into the electrical power of 1.075MW if the system loss is considered to be 0.877.

• 한국태양에너지학회 논문집
• /
• 제33권1호
• /
• pp.40-47
• /
• 2013

An aerodynamic design tool was developed for small wind turbine blades based on the blade element momentum theory. The lift and drag coefficients of blades that are needed for aerodynamic blade design were obtained in real time from the Xfoil program developed at University of Illinois. While running, the developed tool automatically accesses the Xfoil program, runs it with proper aerodynamic and airfoil properties, and finally obtains lift and drag coefficients. The obtained aerodynamic coefficients are then used to find out optimal twist angles and chord lengths of the airfoils. The developed tool was used to design a wind turbine blade using low Reynolds number airfoils, SG6040 and SG6043 to have its maximum power coefficient at a specified tip speed ratio. The performance of the blade was verified by a commercial code well known for its prediction accuracies.

• 한국정밀공학회지
• /
• 제30권10호
• /
• pp.1061-1068
• /
• 2013

In this research, the design optimization of a composite sandwich has been performed for using as an airplane wing skin. Automated analysis framework for aero-structure interaction is used for calculating load data on the wing. For automated analysis framework, FLUENT is used for computational fluid dynamics (CFD) analysis. CFD mesh is generated automatically by using parametric modeling of CATIA and GAMBIT. A computational structure mechanics (CSM) mesh is generated automatically by the parametric method of the CATIA and visual basic script of NASTRAN-FX. The structure is analyzed by ABAQUS. Composite sandwich optimization is performed by NASTRAN SOL200. Design variables are thicknesses of the sandwich core and composite skin panel plies. The objective is to minimize the weight of the wing and constraints are applied for wing tip displacement, global failure index and local failure indexes.

• 한국추진공학회지
• /
• 제25권1호
• /
• pp.29-41
• /
• 2021

공기 흡입식 극초음속 비행체인 스크램제트의 공력 데이터를 기반으로 하여 꼬리날개 각도와 발생추력을 제어 입력으로 가지는 PID 기반 제어기를 설계했다. 일정한 비행 동압을 가지는 상승궤적과 순항 이후 목표지점을 타격하는 궤적을 기준으로 입력하여 해당 궤적을 추종하는 비행 시뮬레이션을 수행했다. 시뮬레이션 결과에 대해서 초기 상승궤적과 순항 궤적에 대해 비행체 모델에 요구되는 추력을 계산하여 수소 연료 이중 모드 스크램제트 연소기에 요구되는 연료 유량 분석을 위한 연소해석을 진행했다. 본 연구의 연소해석은 독립적으로 개발된 흡입구, 연소기, 노즐, 외부 공력 모델을 통합한 모델에 대해 진행되어 공기 흡입식 극초음속 비행체 통합 설계에 대한 기반을 마련했다.