• 항공우주기술
• /
• 제2권1호
• /
• pp.35-43
• /
• 2003

본 논문에서는 차세대 로터 시스템의 핵심 기술인 고성능, 저소음 로터 블레이드 개발을 위한 로터 형상 설계 및 공력/소음 해석 결과를 정리하고 해석 기법을 소개하였다. 먼저 패들형 블레이드를 기본 모델로 베인팁 개념을 적용하여 저소음 특성을 갖는 로터 블레이드 평면형상을 결정한 후, 설계된 차세대 로터 블레이드 즉 NRSB-I의 소음특성을 해석하고 그 결과를 BERP 블레이드와 비교 검토하였다.

• 한국전산유체공학회지
• /
• 제6권3호
• /
• pp.10-18
• /
• 2001

Genetic Algorithm(GA) is applied to aerodynamic shape optimization and demonstrated its merits in global searching ability and the independency of differentiability. However, applications of GA are limited due to slow convergence rate, premature termination, and high computing costs. The present aerodynamic designs such as wing shape optimizations using GA have seldom been applied because of high computing costs. This paper has two objects; improvement of the efficiency of GA and application of GA into aerodynamic shape optimization for 2D and 3D wings. The study indicates that GA can be applied to aerodynamic design and its performance is comparable to traditional design methods.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 추계 학술대회논문집
• /
• pp.100-110
• /
• 2007

A new design approach for a delicate treatment of complex geometries such as a wing/body configuration is arranged using overset mesh technique under large scale computing environment for turbulent viscous flow. Various pre- and post-processing techniques which are required of overset flow analysis and sensitivity analysis codes are discussed for design optimization problems based on gradient based optimization method (GBOM). The overset flow analysis code is validated by comparing with the experimental data of a wing/body configuration (DLR-F4) from the 1st Drag Prediction Workshop (DPW-I). In order to examine the applicability of the present design tools, careful design works for the drag minimization problem of a wing/body configuration are carried out by using the developed aerodynamic shape optimization tools for the viscous flow over multiple-body aircraft geometries.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.43-49
• /
• 2010

Aerodynamic design of the vane type multi-function probe was tried by using CFD and wind tunnel test for the MALE UAV and small business jets. The present multi-function probe can measure total pressure, static pressure and angle of attack by using rotating vane. Therefore major performances are determined by aerodynamic characteristics of vane. In oder to design the sensor compatible to the requirement, aerodynamic characteristics of sensors was investigated by using CFD and dynamic response analysis was also performed for trasient performance. The final aerodynamic performance was measured by the wind tunnel test at Aeorsonic and the results successfully used for the design of vane type multi-function air data sensor.

• 한국전산유체공학회지
• /
• 제15권3호
• /
• pp.32-38
• /
• 2010

Aerodynamic design of the vane type multi-function probe was tried by using CFD and wind tunnel test for the MALE UAV and small business jets. The present multi-function probe can measure total pressure, static pressure and angle of attack by using rotating vane. Therefore, major performances are determined by aerodynamic characteristics of vane. In order to design the sensor compatible to the requirement, aerodynamic characteristics of sensors were investigated by using CFD and dynamic response analysis was also performed for transient performance. The final aerodynamic performance was measured by the wind tunnel test at Aerosonic and the results were compared with the present design. The results showed that the aerodynamic design using the CFD can be successfully used for the design of vane type multi-function air data sensor.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.567-571
• /
• 2011

Air Starter motors are used for the start of medium-speed diesel engine. One of the main part of air starting motors is the axial turbine stage. In this study, design of 1-stage axial type turbine for 14kw class air starter motors has been performed. The turbine blade was designed based on mean-line analysis. 1-D design calculation and numerical analysis with CFD were conducted iteratively. The validation between 1-D design method and numerical analysis for axial clearance has been performed. It revealed that there is optimum axial clearance of turbine design.

• 한국전산유체공학회지
• /
• 제19권2호
• /
• pp.93-98
• /
• 2014

In the present study, CFD methods are applied in the design procedure of rotor blades in a axial-flow fan and the aerodynamic performances are predicted. The blade profiles initially determined by the free vortex method and empirical formula are modified to match the target value of the rotor work load through the analysis of 3D Navier-Stokes solver. The corrected shapes of the rotor blade showed the increase of the efficiency and the pressure simultaneously.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.130-133
• /
• 2008

In this paper the trust region method is studied and applied in aerodynamic shape optimization. The trust region method is a gradient-based optimization method, but it is not as popular as other methods in engineering computations. Its theory will be explained for unconstrained optimization problems and a trust region subproblem will be solved with the dogleg method. After verifying the trust region method with analytical test problems, it is applied to aerodynamic shape design optimization and the performance of airfoil is improved successfully.

• 한국항공우주학회지
• /
• 제32권9호
• /
• pp.35-40
• /
• 2004

본 연구에서는 최적화된 스커트 형상을 설계하기 위한 기초 자료를 얻기 위하여 스커트 의 확산각 및 길이 변화에 따른 노즐의 공력하중 특성을 고속 풍동시험을 통하여 조사하였다. 적절한 스커트를 사용하면 없을 때에 비해 김발의 구동력을 1/10 수준까지도 줄일 수 있었으며 시험 결과는 추후 스커트 형상 설계 데이터베이스로 활용하기 위해 정규화 하였다.

• 한국유체기계학회 논문집
• /
• 제2권1호
• /
• pp.22-28
• /
• 1999

In this study, a preliminary design method of the axial fan was systematically established based on the two-dimensional cascade theory. Flow deviation, lift coefficient, distribution of velocity and pressure coefficient on blade surfaces were predicted by an inviscid flow theory of Martensen method, which was also applied to select an airfoil for required performance in the present design process. The aerodynamic performance of designed blades can be predicted quickly and reasonably by using the through-flow calculation method in the preliminary design process. It would be recommendable to adopt three-dimensional viscous flow calculation at the final design refinement stage.