• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.7
• /
• pp.469-478
• /
• 2019

Multirotor configurations such as VTOL and urban air mobility have been focused on today due to the high maneuverability. Aerodynamic and aeroacoustic characteristics of multirotor have much difference to those of a single rotor. In this study, a numerical analysis based on the free wake vortex lattice method is used for identifying the wake interaction effect. In order to compare the various configurations and operating conditions, the effects of the spacing between the rotors in hovering flight and the effects of the advancing ratio and the formation in forward flight are discussed. In the hovering flight, the unsteady loading of multirotor changes periodically and loading fluctuation increases as decreasing the spacing. It causes the variation in unsteady loading noise and the noise directivity pattern. In the forward flight, the difference in loading fluctuation and noise characteristics are observed according to the diamond and square formation of rotors. By comparing with results of single rotor analysis, multirotor configurations have different directivity pattern and amplitude of loading noise according to the location of each rotor. As a result, wake interaction effect becomes a highly important factor for aerodynamic and aeroacoustic analysis according to multirotor configurations and operating conditions.

• Proceeding of EDISON Challenge
• /
• 2016.11a
• /
• pp.96-100
• /
• 2016

슬롯판을 이용한 경사충격파와 경계층 간섭유동 제어에서, 슬롯의 각도를 바꾸어 가며 제어 성능을 비교하는 수치적 연구가 수행되었다. 기준이 되는 수직 슬롯, 각도를 달리한 6개의 case를 선정하여 하여 충격파 뒤에서 전압손실 및 경계층 안정성을 기준으로 제어 성능을 평가하였다. 수치해석 결과 모든 형상에 대해 제어하지 않은 상태보다 좋은 성능을 얻었다. 공력성능이 뛰어난 그룹과 그렇지 않은 그룹을 구분하여 슬롯과 공동 유동 구조를 분석하면서 경계층 불안정성을 야기하고 전압손실 감소에 영향을 미치는 것은 경계층과 충격파가 상호작용하는 영역에서 Vortex를 얼마나 제어할 수 있는지 여부임을 알 수 있었고, 이러한 Vortex를 얼마나 제어할 수 있는지에 따라 공력 성능이 결정됨을 파악할 수 있었다.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.48.1-48.1
• /
• 2005

• Korean Journal of Weed Science
• /
• v.5 no.2
• /
• pp.155-163
• /
• 1985

Three pyrazole-herbicides, pyrazolate, pyrazoxyfene and benzophenap, were evaluated for their interaction in controlling barnyardgrass (Echinochloa crusgalli) with two chloroacetamide-herbicides, butachlor and pretilachlor. Percent inhibition of barnyardgrass growth by pyrazolate, pyrazoxyfene, and benzophenap was 44%, 64%, and 0%, respectively, when each was applied at the 1.5 leaf-stage of barnyardgrass at a rate of 3㎏ ai per ㏊ as single treatment, and the benzophenap showed 60% inhibition when it was applied at the coleoptile stage. While the lowest rate controlling the 1.5 leaf-stage barnyardgrasses by 98 to 100% of the butachlor and pretilachlor was 1.5㎏ and 200g per ㏊, respectively. All of the combinations of pyrazolate with butachlor, pyrazoxyfene with pretilachlor, and benzophenap with butachlor have shown synergistic interaction in controlling barnyardgrass on the Chisaka's isobole of 90% growth inhibition as well as on the Colby`s interaction efficacy data; synergism indices were 2.44, 1.62 and 1.52 in order. The dose combinations shown the maximal synergism were 1870g of pyrazolate with 140g of butachlor (1:0.075), 33008 of pyrazoxyfene with 338 of pretilachlor (1:0.01), and 3350g of benzophenap with 520g of butachlor (1:0.15) on the ai/㏊ basis.

• Journal of Aerospace System Engineering
• /
• v.16 no.6
• /
• pp.54-63
• /
• 2022

Recently, electric propulsion aircraft with various propeller mounting positions have been under construction. The position of the propeller relative to the wing can significantly affect the aerodynamic performance of the aircraft. Placing the propeller in front of the wing produces a complex swirl flow behind or around the propeller. The up/downwash induced by the swirl flow can alter the wing's local effective angle of attack, causing a change in the aerodynamic load distribution across the wing's spanwise direction. This study investigated the influence of the distance between a propeller and a wing on the aerodynamic loads on the wing. The swirl flow generated by the propeller was modelled using an actuator disk theory, and the wing's aerodynamics were analysed with the VSPAERO tool. Results of the study were compared to wind tunnel test data and established that both axial and spanwise distance between the propeller and the wing positively affect the wing's lift-to-drag ratio. Specifically, it was observed that the lift-to-drag ratio increases when the propeller is positioned higher than the wing.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.361-366
• /
• 2001

The present study describes a practical estimation procedure about the pantograph under several severe aerodynamic load conditions. As the operating speed of the Korean Train Express(KTX) reaches 350km/h, structural safety at various conditions should be examined at the design stage. In the present study, a compact and reliable procedure is developed to get aerodynamic loads on each part of the pantograph regarding the typhoon condition, the train/tunnel interaction, the train/train interaction and the side wind condition. In the estimation procedure, 3-dimensional steady and unsteady CFD simulation around the high speed train facilitates assigning the external local flow condition around the pantograph. The procedure is verified using the results of the low speed wind tunnel test at JARI and applied to 7 flow conditions and 4 operation configurations.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.1
• /
• pp.20-27
• /
• 2002

Aircraft design requires the intergration of several disciplines, inculding aerodynamics, structures, controls. To achieves advances in performance, each technology, or discipline must be more accurate in analysis and must be more highly intergrated. One of the important interdisciplinary interactions in mordern aircraft design is that of aerodynamics and structures. In this study, for increasing accuracy in each discipline's analysis, CFD for aerodynamic analysis and FEM for structurral analysis was used and, for considering important interdisciplinary interactions, aeroelastic effect was considered. As optimization algorithm, PBIL algorithm was used for global optima and was parallelized to alleviate the computational burden. The efficiency and accuracy of the present method was assesed by range maximiziation of reference of reference wing.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.570-571
• /
• 2014

차량의 고속 주행 시 운전자가 인지하게 되는 공력소음은 대부분 차량 전방부의 A 필라 부근에서 발생하는 소음원에 의해 전달된다. A 필라 부근에는 다양한 모양의 돌출물들이 부착되어 있어서 차량 주변의 고속의 유동과의 상호 작용에 의해 다양한 공력 소음이 발생하게 된다. 이러한 차량 전방부의 대표적인 소음 인자인 A 필라 형상에 의한 와류 및 아웃사이드 미러에 의한 유동 구조 변화에 의한 실내 투과 소음에 대해 실험 및 소음원 분석을 수행하였다. 차량 내외부의 복잡한 구조와 재질에 의한 영향을 최소화 하고자 실차 형상 및 실내 조건을 간략화 시킨 차량 단순 모델을 이용해서 A 필라 주변부의 형상에 의한 주요 주요 공력 소음 인자에 대해 기여도를 분석했으며, 실험 결과는 다양한 CAE S/W 의 실내음 예측 결과의 정밀도를 분석하기 위해 사용되었다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.2
• /
• pp.11-21
• /
• 2005

A three-dimensional parallel Euler flow solver has been developed for the simulation of unsteady rotor-fuselage interaction aerodynamics on unstructured meshes. In order to handle the relative motion between the rotor and the fuselage, the flow field was divided into two zones, a moving zone rotating with the blades and a stationary zone containing the fuselage. A sliding mesh algorithm was developed for the convection of the flow variables across the cutting boundary between the two zones. A quasi-unsteady mesh adaptation technique was adopted to enhance the spatial accuracy of the solution and to better resolve the wake. A low Mach number pre-conditioning method was implemented to relieve the numerical difficulty associated with the low-speed forward flight. Validations were made by simulating the flows around the Georgia Tech configuration and the ROBIN fuselage. It was shown that the present method is efficient and robust for the prediction of complicated unsteady rotor-fuselage aerodynamic interaction phenomena.

• Journal of Aerospace System Engineering
• /
• v.9 no.2
• /
• pp.1-6
• /
• 2015

태양광 고고도 장기체공형 무인기나 인간동력 항공기 등에 사용되는 높은 종횡비를 가진 유연날개는 공력 및 구조 상호작용으로 인하여, 구조적 비선형 처짐 및 양력감소 등의 문제가 발생한다. 본 연구에서는 저속 비행하는 높은 종횡비를 가진 날개의 단방향 공력-구조 연계해석을 수행하였다. XFOIL을 사용하여 공력천이현상을 포함한 저 레이놀즈수 익형 공력특성 자료 확보를 기반으로 3차원 양력선 이론을 사용하여 공력해석 연구를 수행했다. 구조해석은 상용소프트웨어 ANSYS를 사용하여 구조변형이나 응력해석 연구를 수행했다. 단방향 공력-구조 연계해석 결과를 바탕으로 인간동력 항공기 주 날개의 형상설계 연구를 수행했다.