• Journal of Navigation and Port Research
• /
• v.31 no.5 s.121
• /
• pp.427-434
• /
• 2007

Indoor air pollution has been a critical issue as a new environmental problem and a significant amount of research has been performed on the indoor air pollution in buildings as well us those in mean of transport such as automobiles, subways, and buses. The actual condition of indoor air pollution in ships, however, was not investigated. Because airtightness of a ship is very higher than a general building and the crew spend almost all the time in indoor space of the ship during underway, indoor air quality(IAQ) of the ship is very important for their comfortableness and health. In this paper, indoor air quality of a new ship is measured and analyzed for the improvement of IAQ in ships.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.3
• /
• pp.275-282
• /
• 2010

The effect of swirl flow on NOx in a nonpremixed turbulent hydrogen jet with coaxial air was studied. The swirl vane angle was varied from $30^{\circ}$ to $90^{\circ}$. The fuel jet air velocity and coaxial air velocity were varied in an attached flame region as $u_F=85{\sim}160m/s$ and $u_A=7{\sim}14m/s$. The objective of the current study was to analyze the characteristics of nitrous oxide emission in a swirl flow and to propose a new parameter for EINOx scaling. The experimental results show that EINOx decreases with the swirl vane angle and increased with flame length. Further, EINOx scaling factors can be determined by considering the effective diameter ($d_{F,eff}$) in a far field concept. The EINOx increased in proportion to the flame residence time (${\sim}{\tau_R}^{1/2.8}$) and the global strain rate (${\sim}{S_G}^{1/2.8}$).

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.4
• /
• pp.11-22
• /
• 1992

It this study, the aerodynamic responses of circular cylinder behind a pair of circular cylinders arranged side by side in a uniform flow were investigated. We confirmed that four types of oscillation are occured on downstream cylinder in such an arrangement. Influenced by upstream cylinders, the amplitude of vortex induced oscillation is increased and wake buffeting occured when S/D(S: distance between the centers of upstream cylinders, D: diameter of cylinder) is smaller than 1.2. When S/D is larger than 1.2, gap flow introduces to oscillation which maintains a uniform amplitude in spite of increasing wind speed. This oscillation is reduced to "wake galloping" if its amplitude exceeds the limit point.

• The Journal of the Korea Contents Association
• /
• v.10 no.10
• /
• pp.451-455
• /
• 2010

Hydraulics usually deals with flows with free surface. When the surface curvature is small, the assumption of hydrostatic pressure distribution is enough. However, in the case, when the curvature is big, the non-hydrostatic pressure distribution should be taken into account and the Navier-Stokes equations should be employed instead of the depth-averaged shallow water equations. For the simulation of two immiscible fluids with different characteristics (e.g. water and air, water and oil), the level set method is selected for this purpose. The developed model is applied to classical dam break problem and the computational results are compared with the experimental data. The effectiveness of the developed model is confirmed.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.1
• /
• pp.225-228
• /
• 2004

Optimization of fluidized bed granulating conditions for yield, bulk density, and tapped density of powdered milk was determined using response surface methodology. Yield of powdered milk was greatly affected by feeding rate of water, and bulk density and tapped density could be reduced by decreasing of atomization pressure. The optimum conditions for fluidized bed granulating of powdered milk were predicted with 6$0^{\circ}C$ of inlet air temperature, 16 mL/min of feeding rate, and 2.1 bar of atomization pressure. Also 94% of yield 0.350 g/㎤ of bulk density, and 0.446 g/㎤ of tapped density of powdered milk could be obtained by the optimum granulating conditions.

• Journal of Korean Association for Spatial Structures
• /
• v.4 no.2 s.12
• /
• pp.99-105
• /
• 2004

The structure systems with non-rigid member were classified by the composition type of line and surface members. As a result of the classification, there are 1-way cable structure, cable net and radial cable net structure in the line member system. And there are pneumatic structure and suspension membrane structure in surface member system. In addition, when the line and surface members are composed together, there is the hybrid membrane system which are divided into hanging type and supported type. In this paper, the Korean terms of structure systems with non-rigid member are recommended through this classification.

• Journal of the Korean Society for Railway
• /
• v.13 no.5
• /
• pp.516-520
• /
• 2010

Parametric study has been conducted to calculate the capacity of vacuum pump system that will be used to maintain the pressure of the tube structure under atmosphere level. Recently many railroad researchers pay attention to the tube train system as one of the super high speed transportation system. To achieve the super high speed, the inside of tube system should be maintained at low pressure level. In the low pressure environment, it is well known that air resistance of train is drastically decreased. Vacuum pump system will be used to make low pressure state for tube structure, exhaust the leakage air and supplement additional vacuum pumping. As results of these studies, we get the lump capacity of vacuum pump for various parameters. These results can be applied to analyze the effects of the reduction of air resistance.

• Clean Technology
• /
• v.10 no.2
• /
• pp.89-100
• /
• 2004

The optimization for the water bath design and the skimmer installation are conducted to separate floated-sludge from the waste water in a water bath of a painting booth. VOF(volume of fluid) model is used to analyze the flow pattern of sludge-water-air mixture in a water bath. From the results of numerical analysis, the design criteria of the skimmer, the separation plate and the sludge inlet port of a water bath are obtained for effective sludge separation from water in bath. Furthermore, the installation condition of the skimmer immersed in water is optimized to minimize entrained air and pressure loss.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.11a
• /
• pp.267-270
• /
• 2007

오존무 분사장치는 흡입구와 내에 소정의 공간이 형성된 케이스와 자동 손잡이와 $360^{\circ}$회전이 가능해 운반 및 이동이 간편한 케이스, 상기 케이스의 내부 소정 부위에 공기 흡입구로 흡입되는 공기 중에 포함된 먼지 및 습기를 제거하는 제습 장치와, 원료가스인 공기를 일정하게 제공하는 송풍기, 강력한 살균 소독기능을 지닌 오존발생기, 오존을 발생시키기 위한 고주파 펄스 전원장치, 입자경이 $3{\sim}40{\mu}m$이하의 이류체 미세 분사형 노즐, 살수통(물을 담는 용기) 및 기능 조절부(펄스전원제어, 타이머 조절, 송풍기 제어, 이류체 미세 분사형 노즐스위치 제어)로 성되어 작동하는 것으로 일반적인 가습기와는 다르다. 그리고 강력한 살균, 소독, 탈취 및 대기의 정화 기능이 있는 오존을 이용하는 동시에 기존의 방식보다 간단한 구조의 분무발생 수단을 구비함으로써 전체적으로 구성을 간단하게 하면서 대기 정화 효율을 향상시키는 장점이 있다.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.279-282
• /
• 2002

최근 건설사업시장의 개방과 건설사업관리제도(이하CM)의 도입으로 국내 건설업계 및 생산시스템에도 많은 변화가 일어나고 있다. 이에 따라, 건축물의 초기시설비는 물론 유지관리 및 최종 폐기단계까지의 비용을 종합적으로 고려한 건물생애주기비용(이하 LCC)에 대한 중요성이 증대되었으며 특히 기계장치의 유지관리비 중 많은 부분을 차지하는 공기조화시설 부문에서 LCC가 주로 검토되고 있다. 그러나 국내에서는 공기조화 설비의 LCC에 대한 절차 및 기준 등이 미비하여 효과적인 LCC분석이 이루어지지 않고 있다. 본 연구는 최근 수행된 국내 공기조화 설비분야의 LCC분석 사례를 조사하여, 국내 공조설비의 LCC분석의 문제점을 분석하였다. 또한 사례 분석을 중심으로 공조설비의 LCC분석 절차를 제시하고 이 절차에 따라 7개의 사례를 비교분석하였다. 그 결과, LCC측면에서 최적 대안을 선정하는 경우 각 대안 별로 뚜렷한 차이를 보이고 있는 에너지비용과 초기투자비를 주된 비용요소로 고려하는 것이 가장 효과적인 것으로 나타났다.