• 한국전기화학회:학술대회논문집
• /
• 2005.04a
• /
• pp.58-58
• /
• 2005

• Ceramist
• /
• v.15 no.3
• /
• pp.24-33
• /
• 2012

• 한국전기화학회:학술대회논문집
• /
• 1999.04a
• /
• pp.56-56
• /
• 1999

• Clean Technology
• /
• v.14 no.1
• /
• pp.61-68
• /
• 2008

There have been great attentions on polymer electrolyte membrane fuel cell (PEMFC) due to their advantageous characteristics such as zero emission of hazardous pollutant and high energy density. In this work, we evaluated degradation phenomena and stability of single cell performance via one dimensional single cell modeling. Here, CO poisoning on anode on anode was considered for cell performance degradation. Modeling results showed that the performance and stability were highly degraded with CO concentration in fuel gas. In addition, cell performance was reduced by slow oxygen reduction on cathode in long term operation. In order to overcome, it is required to increase ratio o#hydrogen in the fuel gas of anode and high Pt loading contained in the cathodic catalyst layer.

• Journal of the Korean Electrochemical Society
• /
• v.10 no.4
• /
• pp.283-287
• /
• 2007

KIER has been developing the anode-supported flat tubular solid oxide fuel cell unit bundle for the intermediate temperature($700{\sim}800^{\circ}C$) operation. Anode-supported flat tubular cells have Ni/YSZ cermet anode support, 8 moi.% $Y_2O_3$ stabilized $ZrO_2(YSZ)$ thin electrolyte, and cathode multi-layer composed of Sr-doped $LaSrMnO_3(LSM)$, LSM-YSZ composite, and $LaSrCoFeO_3(LSCF)$. The prepared anode-supported flat tubular cell was joined with ferritic stainless steel cap by induction brazing process. Current collection for the cathode was achieved by winding Ag wire and $La_{0.6}Sr_{0.4}CoO_3(LSCo)$ paste, while current collection for the anode was achieved by using Ni wire and felt. For making stack, the prepared anode-supported flat tubular cells with effective electrode area of $90\;cm^2$ connected in series with 12 unit bundles, in which unit bundle consists of two cells connected in parallel. The performance of unit bundle in 3% humidified $H_2$ and air at $800^{\circ}C$ shows maximum power density of $0.39\;W/cm^2$ (@ 0.7V). Through these experiments, we obtained basic technology of the anode-supported flat tubular cell and established the proprietary concept of the anode-supported flat tubular cell unit bundle.

• Journal of the Korean Electrochemical Society
• /
• v.14 no.4
• /
• pp.231-238
• /
• 2011

In this work, the numerical analysis for the zincate behavior at a zinc electrode with an electrolyte flow was carried out for a ZAFC. The Nernst-Planck equation with a boundary condition of Butler-Volmer type was adopted to describe electrochemical effects of mass transfer, migration, kinetics of electrode. The Navier-Stokes equation, coupling to the Nernst-Planck equation, is also applied to describe the internal electrolyte flow fields. The validity of the numerical model is proved through the comparative analysis between numerical and experimental results. The concentration of zincate and the current density were also investigated at a zinc anode according to various electrolyte velocities. We have found the concentration of zincate decreased and the current density increased with an increase in the electrolyte velocity.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.2
• /
• pp.161-170
• /
• 2012

There are many factors to consider when attempting to improve the efficiency of fuel cell operation, such as the operation temperature, humidity, stoichiometry, operation pressure, geometric features, etc. In this paper, the effects of the operation pressure were investigated to find the current density and water saturation behavior on a cross section designated by the design geometry. A two-dimensional geometric model was established with a gas channel that can provide $H_2$ to the anode and $O_2$ and water vapor to the cathode gas diffusion layer (GDL). The results from this numerical modeling revealed that higher operation pressures would produce a higher current density than lower ones, and the water saturation behavior was different at operation pressures of 2 atm and 3 atm in the cathode GDL. In particular, the water saturation ratios are higher directly below the collector than in other areas. In addition, this paper presents the dependence of the velocity behavior in the cathode on pressure changes, and the velocity fluctuations through the GDL are higher in the output area than in inlet area. This conclusion will be utilized to design more efficient fuel cell modeling of real fuel cell operation.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.11a
• /
• pp.17-17
• /
• 2000

초음속 비행체 및 극음속 성층권 비행체용 추진기관으로의 사용이 검토되고 있는 차세대 추진기관들을 산화제 공급방식에 따라 공기흡입 엔진, 로켓 엔진 및 복합사이클 엔진으로 분류하여 엔진의 구성방식 및 추진특성들을 기술하였다. 공기흡입 엔진은 저고도에서의 성능이 우수하고 재사용이 가능 하지만 공기 밀도가 낮은 고 고도 영역에서의 성능이 좋지 않으며 로켓 엔진은 넓은 고도영역에서 사용이 가능한 반면 낮은 비추력 및 고비용 발사체계 등과 같은 단점들을 가지고 있다.(중략)

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.6
• /
• pp.643-648
• /
• 2010

Portable fuel cells are commonly operated in the dead-end mode because of such as high fuel utilization. However, the performance of such systems deteriorates continuously with an increase in the amount of by-products such as water vapor and nitrogen. In this study, to verify the effect of water vapor on Proton Exchange Membrane Fuel Cells (PEMFCs), constant-load experiments were carried out for a current density of 600 mA/cm2 and a voltage of 0.4 V, respectively. The performance of the cell was more stable under constant voltage conditions than under constant current density conditions. Condensed water accumulated in the anode channel near the cell outlet. The experimental results show how the relative humidity (RH = 0.15, 0.4 and 0.75) of air at the cathode side affect the performance of PEMFCs with dead-end anode. At RH values higher than 0.15, the mean power density increased by up to 51% and the mean purge duration decreased by up to 25% compared to the corresponding initial values.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.88.2-88.2
• /
• 2011

본 연구는 아연/공기전지 설계기술 개발을 위한 기초 연구로서 전산해석을 이용하여 전해질 유동에 따른 아연/공기전지의 성능 예측에 관한 것이다. 전산해석모델은 전기화학 방정식과 유체유동 방정식으로 구성하였으며, 화학종 반응에 관한 지배방정식으로는 Nernst-Planck식을 이용하였고 전극표면의 전기화학반응은 Butler-Volmer식을 이용하였다. 또한 유체유동 방정식은 Navier-Stoke식을 적용하여 전해질 유동에 따른 전기화학적 성능 변화를 모사하였다. 아연/공기전지 성능 평가 실험으로부터 얻은 I-V 곡선과 전산해석결과와의 비교/분석을 통하여 전기화학모델의 타당성을 검증하였으며, 유체 유동 방정식과의 연동해석을 적용하여 전해질 유입 위치 및 유입 속도에 따른 아연/공기전지의 성능 변화를 조사하였다. 아연/공기전지의 성능은 전해질 유입 위치가 아연극에 가까울수록, 유입 속도가 빠를수록 향상되는 것을 확인할 수 있었다.