• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2015.10a
• /
• pp.455-456
• /
• 2015

• 대한방사선방어학회:학술대회논문집
• /
• 2011.11a
• /
• pp.288-289
• /
• 2011

• Korean Chemical Engineering Research
• /
• v.56 no.3
• /
• pp.356-360
• /
• 2018

The negative effects on ecosystem are getting serious due to the increase of particulate matters (PM) in the air by the increase of the number of population and the industrial activities. Thus, there have been a lot of environmental policies and researches of air purification system and filter mask to relieve the environmental problem. In this research, activated carbon impregnated cellulose acetate fiber filters produced using an electrospinning technique are studied for air purification. NaCl aqueous solution was used to generate PM and the humid air with NaCl PM was dried using a dehumidifier for the filter performance test. Filtration efficiency was increased with the increase of activated carbons, and acetone adsorption capacity was enhanced.

• Proceedings of the KAIS Fall Conference
• /
• 2006.11a
• /
• pp.276-279
• /
• 2006

내부 순환형 회분식 반응기에서 UV/$TiO_2$ 시스템을 이용하여 기상의 아세톤과 알데히드류 유기화합물 분해 반응 특성을 온도와 농도 및 자외선 파장 및 광도에 대하여 고찰하였다. 또한 기존의 공기정화기에 장착할 수 있는 담체를 도출하고자 하였다. 새로운 광촉매 담지체로는 전처리 필터로 사용되는 메쉬망 형태를 사용하였으며, 광조사율이 높고 광촉매의담지량을 늘릴 수잇는 방안에 대한 연구를 수행하였다. 본 연구 결과 광접촉 면적 대비 높은 반으성을 나타내었으며 Pt, Pd 등의 첨가에 의한 반응성 상승이 나타났다. 메쉬망 형태의담지체 사용시 광조사면적 대비 담지량의증가에 의하여 온도에 의한 흡착특성에 따른 영향을 더 크게 받는 것으로 나타났다.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.1
• /
• pp.15-21
• /
• 2017

WHO reported that millions of people die every year because of diseases induced from environmental pollution. In 2012, approximately 7 million people were killed due to air pollution. Major cause of such pollution includes toxin, chemical waste, radiation and air pollution. Therefore, the significance and interest to indoor air quality has been continuously increased. Especially, the interest in radon, the ARC group 1 carcinogen, is rapidly increasing, and banning the use of construction materials that release radon, repairing aged buildings, and developing ventilators. To reduce the level of radon gas was inflowed to indoors and outdoors, this study is to research and develop a radon gas absorption board using absorbents. The absorbents utilized to absorb the radon gas were porous diatomite, natural zeolite, 4A zeolite and 13X zeolite and employed bentonite and illite, montmorillonites with the property of exchanging anions. As the main binder, magnesium oxide was used, with a content of 25% magnesium chloride.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.11
• /
• pp.977-984
• /
• 2013

A hygroscopic rotor comprises many microchannels with high adsorption characteristics. In this study, the iterative adsorption/desorption processes that were affected by the humid air flow in a channel were numerically simulated. In consideration of the accuracy and computational costs, in the desiccant layer, only surface diffusion was considered in this simulation. The results were compared with the previous numerical results and found to show good agreement. By conjugating the heat and mass transfer between the desiccant and the flow layers, temporal and spatial changes in the vapor mass fraction, adsorbed liquid water mass fraction, and temperature in the channel were presented.

• Congress of the korean instutite of fire investigation
• /
• 2010.12a
• /
• pp.147-171
• /
• 2010

도장작업은 기계 기구, 금속, 자동차, 전기 전자, 선박, 가구제조업 등 각종 사업장에서 많이 취급되고 있는 작업으로서 취급물질이 대부분 합성수지 유기용매 등 인화성 또는 가연성 액체이거나 가연성 분체로서 용매 또는 분진으로 인한 폭발 화재의 위험성이 아주 높은 실정이다. 보통 4류 위험물의 유증기는 공기보다 무겁다 라는 생각으로 발생된 모든 유증기는 위험물 인근에 체류할 것이라는 생각을 하지만 상온에서 증발한 유증기 대부분은 인근의 대기와의 밀도차에 의해 주변으로 흩어지거나 연소하고 중량(重量)의 유증기만이 남아 화재조사에서 중요한 단서로 역할을 한다. 대부분분의 페인트 제품이 가열과 동시에 끊기 시작해서 비등점 측정이 어려웠고 발화점이 비슷한 다른 페인트에 비해 중량(重量)유증기 발생이 단시간 동안 낮은 온도에서 많이 발생한 것은 페인트의 안료가 유증기 발생을 방해해서 시너의 유증기 발생량과 동일한 양의 페인트 유증기 발생시간이 더 걸린 것 같다. 대부분의 유증기는 집진시설을 통해 A/C타워의 활성탄에 흡착되어 제거된다. 하지만 슬러지에 남아있는 희석제는 A/C타워를 정지하고 집진시설등의 배관에 있는 슬러지 청소 과정에서 주위 열원에 의해 많은 유증기를 발생하여 화재의 위험성이 존재함으로 작업자의 각별한 주의가 필요하다.

• Korean Chemical Engineering Research
• /
• v.61 no.3
• /
• pp.472-478
• /
• 2023

In this study, the acetaldehyde removal characteristics of activated carbon (AC) for air purifier filters were investigated using metal catalysts-impregnation and functional group-modification method. The AC with a high specific surface area(1700 m²/g) and micropores was prepared by KOH activation of coconut charcoal and the efficiency of catalyst and functional group immobilization was examined by varying the drying conditions within the pores after immersion. The physical properties of the prepared activated carbon were analyzed by BET, ICP, EA, and FT-IR, and the acetaldehyde adsorption performances were investigated using gas chromatography (GC) at various impregnation and modified conditions. As the concentration of impregnation solution increased, the amount of impregnated metal catalysts increased, while the specific surface area showed a decreasing trend. The adsorption tests of the metal catalyst-impregnated and functional group-modified activated carbons revealed that excellent adsorption performance in compositions MgO10@AC, CaO10@AC, EU10@AC, and H-U3N1@AC, respectively. The MgO10@AC, which showed the highest adsorption performance, had a breakthrough time of 533.8 minutes and adsorption capacity of 57.4 mg/g for acetaldehyde adsorption. It was found that the nano-sized MgO catalyst on the activated carbon improved the adsorption performance by interacting with carbonyl groups of acetaldehyde.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.04a
• /
• pp.311-312
• /
• 2000

최근 들어 환경대기중 휘발성유기화합물(Volatile Organic Compounds)에 대한 인식이 고조되면서 극미량 유기물질의 채취 및 분석기법에 대한 연구가 활발히 수행되고 있다. 미국의 경우, 1980년대 초부터 대기중 VOC에 대한 연구가 활발히 이루어져서 여러 종류의 VOC에 대한 시료채취 및 분석방법이 명시되어 있지만 우리나라에서는 VOC에 대한 전반적인 측정방법이 아직까지는 없는 실정이다. 미국에서 지정한 VOC의 시료채취방법 중에서 일반적으로 가장 널리 이용되고 있는 방법으로는 용기를 이용하여 유기화합물을 함유하고 있는 공기를 직접 채취하는 방법과 흡착관을 이용하는 방법을 들 수 있다. (중략)

• Applied Chemistry for Engineering
• /
• v.23 no.1
• /
• pp.42-46
• /
• 2012

In this study, a mesoporous carbon (CMK-3) activated using KOH was applied to the adsorption of formaldehyde, a representative indoor air pollutant. Activation process was carried out by putting KOH-treated CMK-3 in a reactor maintained at $700^{\circ}C$ in $N_2$ atmosphere. The activated sample was characterized using BET, XRD, XPS and FT-IR analysis. The formaldehyde adsorption performance of the mesoporous carbon was improved, which is attributed to the formation of oxygen and nitrogen functional groups on the mesoporous carbon surface by the activation process.