• 한국화재소방학회논문지
• /
• 제17권4호
• /
• pp.86-91
• /
• 2003

공기조화설비가 설치된 감시공간에서의 화재 시 열$.$연기기류의 유동형상은 정상 유동해석과 다른 기류 유동형상을 나타내어 화재감지기의 응답특성지연 해결 및 연기감지농도를 향상, 화재초기에 경보를 발생하여 인명피해 및 재산피해를 최소화하기 위한 성능위주의 화재감지장치 개발을 위한 필요성에 의해 연구를 수행하였다. 본 연구는 높은 연기응답특성을 가지며 공기순환에 의한 응답특성지연에 영향을 받지 않는 능동형태의 연기감지장치로서 감시공간의 공기를 공기흡입관을 통하여 연기농도 분석장치로 흡입하여 연기를 감지하는 공기흡입형 광전식 연기감지장치 개발에 필요한 연기농도 분석기술 및 공기흡입관을 통한 균등 공기흡입기술에 대하여 수행하였다. 연구결과, 공기흡입배관에 설치된 흡입구를 통한 공기흡입이 균등하게 이루어져 균일한 감도특성을 나타내어 공기순환에 의한 연기감지의 지연에 영향을 받지 않으며 연기감지성능은 수동형태의 연기감지기보다 우수한 응답특성을 나타내었다.

• 기계저널
• /
• 제35권10호
• /
• pp.886-895
• /
• 1995

근래들어 도시의 집중화와 고밀도화, 교통량의 증대 등 사회구조의 급격한 변화로 각종 소음원 들이 증가하고 있으며 소음에 대한 일반인의 관심도 점차 높아지고 있다. 건물의 경우 한정된 공간에서 거주자의 생활을 보다 쾌적하고 편리하게 하기 위해서 각종 설비들이 증가되고, 이들 설비들은 대용량화하는 추세에 있다. 건물내 공간의 기능을 능률적으로 유지하기 위해 설치된 각종 장비(공기조화기, 펌프, cooling tower, 보일러, 냉동기 \ulcorner 발전기 등)에서 발생하는 소음이 직접 실내로 투과되거나 이들이 발생하는 진동이 건물 구조체로 전달되어 실내소음을 야기시키는 경우가 많다. 따라서, 건물을 설계할 때는 실별 용도에 따라 허용소음도를 결정한후 이러한 실내 소음환경을 달성하기 위해 각종 조처를 강구하게 되는데, 이 글에서는 이러한 건물의 실내 소 음도 영향 평가의 하나로 특정 건물의 예를 들어 소음도 계산과 소음의 원인 및 대책에 관해 기술하고자 한다.

• 설비공학논문집
• /
• 제15권3호
• /
• pp.203-209
• /
• 2003

Control algorithms of an air handling unit by using the mixing box plenum pressures were developed and verified by experiments. Control algorithms developed for this study were the setpoint algorithms for the outdoor damper position, the outdoor/fixed plenum pressure, and the return/exhaust plenum pressure. The outdoor/fixed plenum pressure setpoint was used to control the bypass damper position, and the return/exhaust plenum pressure setpoint was used to control the return fan speed. Experimental results showed the good control of the required outdoor air demand. Therefore, setpoint algorithms developed for this study may effectively be applied for the control of the VAV air handling unit.

• 설비공학논문집
• /
• 제14권5호
• /
• pp.415-423
• /
• 2002

An experimental study using a psychrometric calorimeter was conducted to investigate the temperature and pressure mea surement errors permitted for determining cooling capacity of an air conditioner. First, the instrument calibration was made in accordance with the related test methods and guidelines in order to accurately evaluate basic performance (cooling capacity and airs flow rate). Secondly, a parametric study was performed to examine the effect of measurement error involved if temperature and pressure measuring instruments on the cooling capacity calculation. From the results, it was found that the degree of accuracy for both temperature and pressure measurements played an important role on the error occurring in the determination of cooling capacity and needed to be maintained within a certain value to guarantee required accuracy of cooling capacity.

• 설비공학논문집
• /
• 제16권12호
• /
• pp.1227-1233
• /
• 2004

Air handling unit (AHU)'s air filter pressure difference is important for energy consumption and indoor air quality. Both energy Performance data and air filter differential pressure of AHU in real office buildings were monitored and analyzed to investigate quantitatively energy impact as dust buildup level on air filter grows. We also modeled and simulated CAV system using HVACSIM＋ program to examine the energy effect of dust buildup on filters. Through analysis of time series pressure drop data, the filter pressure difference rate has been increased due to cumulative supply air flow rate increase. As filter pressure drop increased to 1 inch water column, it is found that the supply air flow rate was decreased by 10%, the chilled water flow rate was increased by 5.9% and the pump energy consumption was increased to 5.9%.

• 설비공학논문집
• /
• 제19권8호
• /
• pp.563-568
• /
• 2007

The air-side particulate fouling in the heat exchangers of HVAC applications degrades the performances of cooling capacity, pressure drop across a heat exchanger, and indoor air quality. Indoor and outdoor air contaminants foul heat exchangers. An empirical modeling equation has been derived from the experimental results using accelerated tests and it showed good predictions of the fouling characteristics of the slitted finned tube heat exchangers. However the modeling equation predicts only the fouling characteristics of new heat exchangers and it can not predicts fouling characteristics obtained from actual field data which contains the effect of hydrophilicity deterioration. Therefore an modified modeling equation is proposed and it shows good predictions of the actual fouling characteristics of finned-tube heat exchangers.

• 한국산학기술학회논문지
• /
• 제16권10호
• /
• pp.6445-6452
• /
• 2015

건물용 공기조화기의 냉수 코일은 작동조건에 따라 건표면, 습표면 또는 부분적인 습표면이 형성된다. 따라서 냉수코일을 적절히 설계하기 위해서는 건표면과 습표면, 그리고 부분적 습표면에 대한 열전달 해석이 필요하다. 본 연구에서는 미소체적에 대한 해석을 통하여 냉수코일의 성능을 계산하는 미소체적 모델을 제시하였다. 해석 모델의 예측치를 냉수코일 실험결과와 비교한 결과 미소 체적 모델은 공기측 전열량을 10.1% 이내에서 예측하고 공기측 압력손실을 11.1%, 현열비도 5.7%내로 예측하였다. 해석 모델을 활용하여 물측 회로의 변화가 냉수코일의 성능에 미치는 영향을 검토하였다.

• 설비공학논문집
• /
• 제15권11호
• /
• pp.943-956
• /
• 2003

A numerical program has been developed for the simulation of automotive engine cooling system. The program determines the mass flow rate of engine coolant circulating the engine cooling system and radiator cooling air when the engine speed is adopted by appropriate empirical correlation. The program used the method of thermal balance at individual element through the model for radiator component in radiator analysis. This study has developed the program that predicts the coolant mass flow rate, inlet and outlet temperatures of each component in the engine cooling system (engine, transmission, radiator and oil cooler) in its state of thermal equilibrium. This study also combined the individual programs and united into the total performance analysis program of the engine cooling system operating at a constant vehicle speed. An air conditioner system is also included in this engine cooling system so that the condenser of the air conditioner faces the radiator. The effect of air conditioner to the cooling performance, e.g., radiator inlet temperature, of the radiator and engine system was examined. This study could make standards of design of radiator capacity using heat rejection with respect to the mass flow rate of cooling air. This study is intended to predict the performance of each component at design step or to simulate the system when specification of the component is modified, and to analyze the performance of the total vehicle engine cooling system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1450-1454
• /
• 2007

주상복합형 주거공간에 각 실간 Cross Talking에 의한 소음을 저감시키고 실내기의 공기조화로 발생하는 팬의 소음을 저감 시키기 위하여 소음 환기 장치를 개발 하였다. 공명형과 팽창형의 특성을 적용한 복합적 소음기로 저감주파수 대역에 따른 설계가 가능하며 이 소음기 성능시험 결과 특정 주파수 대역에서 20dB이상의 삽입손실치가 발생하고, 삽입에 의한 압력손실 2mmAq 이하가 됨을 확인하였다. 본 개발품의 특성은 구조가 간단하고 분해조립이 가능하여 설치 및 유지보수가 용이한 제품이다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제19권4호
• /
• pp.17-26
• /
• 1995

In general existing air conditioning devices, which are carried out by convection heat transfer, are very popular compared with the radiation type air conditioning devices. But perconal convection tpe air conditioning units are unuseful air conditioning type because it handles amount of surrounded air to meet the temperature and humidity. In this view, this study is intended to develope personal dir conditioning units using a radiation type radiator. Liquid Droplet Radiator(L.P.R.) radiates the energy by means of thermal radiation. Radiative energy from L.P.R. is the infrared rays which heat the objects without lose of energy. It is a desirable heating method for the local area within the large room. In this study, the analysis uses the Monte Carlo methd to predict the temperature distribution in the droplet sheet and the net heat flux from the L.D.R.. And for this study and experiment was carried out to analyse the radiative and convective heat transfer characteristics in the L.D.R.. And the experiment was investigated the effects of inlet temperature, feed rate, optical thickness and droplet diameter on heat transfer characteristics of L.D.R.. The obtained results from the numerical and experimental studies of L.D.R. were as follows ; (1) The heat flux of L.D.R. was effected by extinction coefficient of droplet sheet, optical thickness and droplet temperature, surface area and emissivity of the droplet. And it was increased with the temperature, feed rate and optical thickness, on the other hand decreased with increasing of droplet diameter. (2) The experimental results for heat flux was ecalucted below 20% than that of the numerical solution by Monte Carlo method, but the tendency of the variation shows relatively good agreement.