• Journal of the Korean Professional Engineers Association
• /
• v.25 no.1
• /
• pp.11-14
• /
• 1992

얼마전까지만 해도 우리나라는 조용한 아침의 나라, 동방예의지국이라 예찬되어 왔으며, 아름다운 산하는 금수강산이라 불리어져 왔다. 비록 창호지 한장으로 바른 창문이었지만 소음공해같은 것은 결코 느끼지 않고 살았으며, 창호지를 통하여 전달되는 첫새벽의 닭우는 소리는 소음이라기 보다는 장부의 단잠을 깨워주는 자연음으로서의 낭만이 있었다. 그러나, 이젠 사정이 크게 달라졌다. 지난 40년 동안에 우리나라 경제가 고도성장을 이룩함으로써 우선 국민생활은 풍요로와 겼으나 대소 공장과 사업장 및 교통혼잡으로부터 The아져 나온 각종 오염물질이 엄청나게 증가하여 호흡하는 공기와 마시는 물, 곡물이 자양되는 토양은 병들어 가고 있을 뿐만 아니라 옛날에는 생각지도 못했던 온갖 소음ㆍ진통으로 우리는 포장되어 살아가고 있다 해도 과언이 아니다. $\ulcorner$소음진동규제법$\lrcorner$에 소음이란 기계ㆍ기구ㆍ시설 기타 물체의 사용으로 인하여 발생한 강한 소리라 정의하고 있다. 말할 것도 없이 이는 인위적으로 발생되는 시끄러운 소리를 의미하며, 이러한 소음을 다소나마 피하기 위해 창문을 알루미늄샤시 유리창으로 바꾸어 커텐을 치고, 출입문을 두중한 원목 도어로 교체 해도 다양해지고 강해진 소음공해를 막기는 어려운 세상이 되 었다. 이로 인하여 우리는 생활의 안정을 위협 받게 되었으며, 학업과 생업에 크고 작은 장해를 받으며 살아가고 있는 것이 오늘의 현실이다. 정부ㆍ기업ㆍ국민 각자가 쾌적한 환경을 보전하고자 하는 확고한 의지와 배경이 없다면 후손들에게도 대물림 될 것임에 틀림없으며, 특히 이러한 현상은 도회지에서 더욱 심화될 것임은 명약관화하다 하겠다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.21-24
• /
• 2006

대부분의 사무용 건물은 코아 부분(엘리베이터 홀, 화장실, 계단 등)을 제외하고는 Open 되어 있으며, 필요에 따라 부서간에는 천장 면까지 도달하는 경량벽체를 설치하여 독립된 공간을 구획하고, 부서내부에서는 직원들간의 커뮤니케이션은 용이하게 하는 대신에 최소한의 독립성을 제공하기 위해 낮은 칸막이 등을 설치하고 있다. 그러나 사무실에 사용하는 칸막이 벽체 중 천장 면까지 도달하는 칸막이에 대해서는 KS F 2808(건물 부재의 공기전달음 차단성능 실험실 측정방법)의 측정방법을 이용하여 차음성능을 확인할 수 있으나 낮은 칸막이에 대해서는 소음저감 성능을 측정할 수 있는 측정 방법에 관한 규격이 없다. 따라서 기존에 있는 모든 KS 규격들은 국제표준규격인 ISO와의 부합화가 이루어졌거나 이루어지고 있기 때문에 이러한 정부의 방침에 따라 본 낮은 칸막이에 대한 소음감쇠량 측정규격 또한 ISO규격(ISO 10053(음향- 실험실 조건에서의 사무실 스크린의 소음저감성능 측정방법))을 받아들이기 위해 ISO규격 내용을 검토하였다. 향후 이 규격이 그대로 우리나라 규격으로 제정될 때 나탈 수 있는 문제점을 최소화하기 위해 국내에 있는 반 무향실에서 낮은 칸막이의 실제 소음저감 성능을 실시할 계획이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.311-318
• /
• 2021

Underwater, signals are transmitted by sound waves. Sound waves are transmitted through a multipath, either directly or through reflection, due to the variety of underwater environmental characteristics. In such diverse and complex underwater environments, tests must be conducted to determine the extent of the hazard from the survivability and pitfalls of submarines by measuring the underwater radiated noise. Usually, the sound source level measurement of underwater radiated noise should be made within the closest point (CPA: Closest Point of Approach) ± a few meters between the measurement sensor and the submarine. In this study, FDOA and TDOA methods were proposed to estimate the underwater source range. A simulation based on the underwater channel model confirmed the performance of the proposed method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.156-158
• /
• 2014

The interior noise of an excavator cabin is important factor related to operation efficiency. For analyzing the cabin air-borne sound, the SEA cabin model was developed using VA One. Analysis result using measured surface SPL of cabin was compared with test data. And the noise reduction guide of cabin was suggested with contribution and sensitivity analysis results of major design variables using developed SEA analysis.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.75-80
• /
• 1997

1999년 한반도 상공에 발사되어 21세기 한국의 우주 시대를 열어나갈 국내 최초의 다목적 실용위성인 KOMPSAT의 개발이 한국 항공 우주 연구소를 주관 기관으로 국내외의 여러 기업 및 연구기관들이 참여한 가운데 현재 진행 중이다. 본 논문에서는 위성체의 설계, 제작 및 시험의 국산화 일환으로 국내에서 제작된 이중 추진 장치(Dual Thrust Module)의 발사 환경 시험에 대한 과정 및 결과에 대하여 언급코자 한다. 일반적으로 목표 궤도에서 발사체로부터 분리된 위성체는 자세 제어를 수행하며, 또한 저궤도 위성의 경우 궤도상에 존재하는 공기등의 저항으로 인하여 빈번한 궤도수정이 필요하다. DTM은 이러한 궤도수정 업무를 담당하는 중요한 위성체의 부품이다. 그러나, 지상에서 발사시 발사체로부터 전달되는 진동 및 소음의 영향으로 인하여 기능 장애를 일으킬 우려가 있음에 따라, 제작된 DTM은 위성 본체에 장착되기 전 반드시 발사 시와 동일한 환경하에서 고유의 기능을 성공적으로 수행할 수 있는지에 대한 검증 절차가 필요하다. 본 연구에서는 DTM의 발사 환경 시험을 성공적으로 수행함으로써 위성체 및 부품의 시험기술을 축적하여 국내 위성 개발 분야에 기여코자 한다.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.6
• /
• pp.569-574
• /
• 2011

In research vessels or naval ships, airborne noise from machineries such as diesel engine is the major source of underwater noise at low speed. In this paper, effect of engine noise on underwater noise is studied by considering two paths; sound radiation from hull plate and direct airborne noise transmission through hull plate. SEA (Statistical energy analysis) is used to predict hull plate vibration induced by engine noise, where SEA model consists of only two subsystems; engine room air space and hull plate. The pressure level in water is calculated from sound radiation by plate. Engine noise transmission through hull plate is obtained by assuming plane wave propagation in air-limp plate-water system. Two effects are combined and compared to the measurement, where speaker is used as a source in engine room and sound pressure levels in engine room and water are measured. The hydrophone is located 1 m away from the hull plate. It is found below 1000 Hz, prediction overestimates underwater sound pressure level by 5 to 12 dB.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.3 no.1
• /
• pp.49-57
• /
• 2002

The possibility of a transmission noise reduction of piezoelectric smart panels using piezoelectric shunt damping is experimentally studied. Piezoelectric smart panel is basically a plate structure on which piezoelectric patch with shunt circuits is mounted and sound absorbing materials are bonded on the surface of the structure. Sound absorbing materials can absorb the sound transmitted at mid frequency region effectively while the use of piezoelectric shunt damping can reduce the transmission at resonance frequencies of the panel structure. To be able to reduce the sound transmission at low panel resonances, piezoelectric damping using the measured electrical impedance model is adopted. Resonant shunt circuit for piezoelectric shunt damping is composed of register and inductor in series, and they are determined by maximizing the dissipated energy throughout the circuit. The transmitted noise reduction performance of smart panels is investigated using an acoustic tunnel. The tunnel is a tube with square crosses section and a loud-speaker is mounted at one side of the tube as a sound source. Panels are mounted in the middle of the tunnel and the transmitted sound pressure across panels is measured. Noise reduction performance of a smart panels possessing absorbing material and/or air gap shows a good result at mid frequency region but little effect in the resonance frequency. By enabling the piezoelectric shunt damping, noise reduction of 10dB, 8dB is achieved at the resonance frequencise as well. Piezoelectric smart panels incorporating passive method and piezoelectric shunt damping are a promising technology for noise reduction in a broadband frequency.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.677-684
• /
• 2004

This paper describes a method for identifying the dynamic characteristics of air foil bearings for high speed turbomachinerys with the LS/IV method. In fact identifying the characteristics of air foil bearings is very difficult work, and it is tried to identify it. Experiments were conducted to determine the structural dynamic and hydrodynamic characteristics of air foil bearings. Numerical predictions compare the static and dynamic force performances. The housing of the bearing on the journal was driven by the impact hammer which were used to simulate impact force acting on air foil bearings. The characteristics of air foil bearings were extracted from the frequency response function (FRF) by LS(Least Square) method and IV(Instrumental Variable) method. The experiment was tested at 0 rpm and $10000\sim16000rpm$. And the test results were introduced about the dynamic characteristics of air foil bearings, and also compared with theoritical results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.468-474
• /
• 2020

Metal ducts for transporting air conditioning and heating inside ships have recently been replaced by cloth ducts that have the advantage of delivering air evenly to the compartments, with excellent noise reduction in major compartments, such as combat command rooms, steering rooms, and sound detector cabins. Since the performance requirements of fabric ducts for vessels are strict, and the entire length of the ducts was imported from Korea, the government wants to create economic effects through localization of fabric ducts. Air permeability and fire prevention performance tests verified the applicability to naval vessels of fabric ducts developed by Hyundai Heavy Industries and HiDact, and performance requirements presented in the POS were verified. As a result of the tests, the fabric ducts met the requirements for air permeability and fireproof performance.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.1
• /
• pp.43-55
• /
• 2013

The window ventilation system based on the heat recovery device was developed which make air ventilation possible without opening the windows. However, mechanical and aerodynamic noises were come to pass which annoyed people in rooms. In the present study, noise of new window ventilation system was measured in both general room and anechoic chamber. Also, the noise path was detected to find cause of noise generation and vulnerable area of the device. Sound absorptive and insulation materials were applied to mitigate the noise. Finally, an alternative noise control method was suggested which can satisfy with the indoor noise standards. As a result, it was shown that the cause of noise was the low transmission loss in the ventilation system. As a result, it was shown that the main noise source of the ventilation system was the blower and the major cause of noise was the low transmission loss of the ventilation system. It is also concluded that the noise levels complies with the noise standards of 40 dBA when 2 mm rubber sheet is applied inside the ventilation system.