• Nuclear Engineering and Technology
• /
• v.16 no.2
• /
• pp.80-88
• /
• 1984

The removal mechanism of air borne methyl iodide by triethylenediamine (TEDA) impregnated charcoal bed was investigated. The analysis of experimental data indicates that pore diffusion is the rate controlling step when the air velocity is over 20cm/sec, and both fore diffusion resistance and external mass transfer resistance are contributed to the overall resistance when the air velocity is 10cm/sec. The adsorption model to describe the performance of impregnated charcoal bed under dry condition where water vapors do not exist in air, is proposed. The calculated values and experimental results are well matched.

• Korean Journal of Food Science and Technology
• /
• v.26 no.2
• /
• pp.184-187
• /
• 1994

Size distributions of rice flour measured by microscope, sieve, Coulter counter (electrozone) and aerodynamic (Aerosizer) methods were compared. Among the particle sizes measured by four methods, those by microscope and sieve were the smallest and the largest, respectively. Difference was found between the particle sizes measured by Coulter counter and aerodynamic methods.

• Magazine of the Korea Concrete Institute
• /
• v.4 no.3
• /
• pp.157-166
• /
• 1992

해수환경하의 콘크리트 구조물은 동결융해의 반복에 의한 물리적인 침식과 해수중에 용존하는 각종의 이온들의 침투로 인한 화학적 침식에 의해 현저한 성능저하현상을 나타내는 것으로 알려져있다. 본 연구는 포졸란계 혼합재인 플라이 애쉬, 슬래그, 슬리카 흄과 폴리머계 혼합재인 Ethylene Vinyl Acetate(EVA), Styrene-Butadiene Rubber(SBR)를 사용하여 제조한 콘크리트 경화체의 해수환 경하에서 동결융해 저항성에 미치는 혼합재의 종류 및 첨가량의 영향, W/C의 영향을 비교 검토한 실험적 연구이다. 콘크리트의 동결융해 저항성을 위해서는 공기연행이 필수적이며, 공기연행시킨 경우 W/C가 낮을수록 동결융해 저항성이 우수하였다. 해수중에서의 동결융해 저항성은 슬래그분말을 첨가할 때 우수하였으며, 폴리머계 혼합재에서는 EVA가 우수한 결과를 나타내었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.383-383
• /
• 2014

최근 디스플레이, 태양전지 그리고 touch screen panels 등 optoelectronic 장치의 시장이 성장함에 따라 투명전극의 수요가 증가하고 있다. Indium tin oxide (ITO)의 좋은 특성 때문에 주로 투명전극에 많이 사용되고 있다. 그러나 화학적 안정성이 떨어지고, 휘어질 때 특성저하가 심하여 금속나노와이어, 탄소나노튜브, 전도성폴리머, 그리고 그래핀 등의 다른 투명전극의 연구가 활발히 진행되고 있다. 그 중에서 그래핀은 높은 전자 이동도(200000 cm2v-1s-1)와 휘어져도 전기적 크게 변하지 않는 특성 때문에 유망한 투명 전도성 전극 (Transparent Conductive Electrodes, TCEs)으로 연구되어왔다. 또한 다양한 속성 가운데, 높은 광 투과성은 그래핀의 가장 큰 장점이다 [1]. 최근, 화학 기상 증착 (Chemical Vapor Deposition, CVD) 등 다양한 제조 방법이 대량 생산을 위해 개발되었다. 그러나 이 방법은 비용이 많이 들며, 과정이 상당히 복잡하고 높은 온도 (${\sim}1000^{\circ}C$)를 필요로 한다. 따라서 용매 기반의 환원된 그래핀 산화물(Reduced Graphene Oxides, RGOs)이 최근 주목 받고 있다. 그러나 RGOs의 면저항이 높아 전극으로서 사용이 제한된다. 따라서 전기적 특성을 향상시키는 방법으로 단일 벽 탄소 나노튜브 (Single-Walled Carbon Nanotubes, SWNTs)를 혼합하거나 화학적 도핑을 통하여 면저항을 크게 향상시키는 연구가 활발히 진행되고 있다. 그러나 이런 화학적 도핑의 경우 박막이 공기 중에 직접 산소나 습기와 반응하여 전기적 특성이 저하되는 문제점을 가지고 있다 [2]. 이러한 문제를 해결하기 위해 AuCl3을 도핑한 박막에 내열성 및 내광성 등의 화학적 안정성이 뛰어난 PEDOT:PSS를 코팅하여 필름의 공기중의 노출을 막아 줌으로써 도핑의 안전성 및 전기적 특성을 최적화하였다. 본 연구에서는 간단한 dip-coating방법을 사용하여 4개의 RGO/SWNTs 박막을 흡착하였다. 다음으로 AuCl3를 도핑하여 면저항 $4.909K{\Omega}$, $4.381K{\Omega}$인 두 개의 샘플의 시간과 온도에 따른 면저항의 변화를 확인하였다. 그리고 필름의 도핑 안전성을 향상 시키기 위해 AuCl3를 도핑한 필름 위에 전도성 폴리머 PEDOT:PSS 코팅하여 면저항 $886.1{\Omega}$, $837.5{\Omega}$인 두 개의 샘플의 시간과 온도에 따른 면저항의 변화를 확인하였다. AuCl3 도핑된 필름의 경우 공기 중에 150시간 노출 시 72%의 면저항 증가가 발생하였지만 PEDOT:PSS가 코팅된 필름의 경우 5%의 면저항 증가가 나타나 확연한 차이를 보였다. 또한 AuCl3 도핑한 필름의 경우 $150^{\circ}C$에서 60시간동안 공기중에 노출되었을 때 525%의 면저항 증가가 발생하였지만 PEDOT:PSS가 코팅된 필름의 경우 58%의 면저항 증가를 나타내었다. 이것은 PEDOT:PSS가 passivation역할을 하여 필름이 공기에 노출된 부분을 막아주어 도핑된 필름의 면저항의 변화를 줄여 주었음을 알 수 있다.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.3
• /
• pp.1-7
• /
• 1999

This paper describes the modification of hull bottom for the air lubrication technique to the passenger boat in service at the Chung-Ju lake, which has a large beam-draft ratio. From numerical analysis of 2-D cavity problem by potential theory, the cavity shape, length and the pressure in cavity are estimated for the simplified geometry of hull bottom, and the non-dimensional parameters affecting air cavity phenomena are investigated. Extensive resistance tests for the model ship which has variation of step height and side strip have been performed to investigate the formation of air cavity and the drag reduction effectiveness. And also, the development of attached cavity to the bottom were observed from the flat bottom made by transparent acrylic plate. From this survey on the modification of bottom shape and the air lubrication technique, the total resistance of model ship could be reduced by about 25% at the design speed compared to the proto type hull form.

• Journal of computational fluids engineering
• /
• v.19 no.1
• /
• pp.41-46
• /
• 2014

The aerodynamic drag of high-speed train has been calculated and the effect of bogie side fairing on the aerodynamic drag has been investigated. Computational Fluid Dynamics (CFD) simulation based on steady-state 3 dimensional Navier-Stokes equation has been conducted employing FLUENT 12 and the aerodynamic model of HEMU-430x, the Korean next generation high-speed train under development has been built using GAMBIT 2.4.6. Three types of bogie side fairing configuration, the proto-type without fairing, half-covered fairing to avoid the interference with the bogie frame and full-covered fairing have been adopted to the train model to compare the drag reduction effects of the bogie side fairing configurations and the numerical results yields that the bogie side fairing can reduce the aerodynamic drag of the 6-car trainset up to 7.8%. The aerodynamic drag coefficient of each vehicle as well as the flow structures around the bogie system have also been examined to analyze the reason and mechanism of the drag reduction by bogie side fairing.

• Journal of the Korean Electrochemical Society
• /
• v.4 no.2
• /
• pp.58-64
• /
• 2001

YSZ ($8mol\%$ yttria-stabilized zirconia)-modified LSM $(La_{0.85}Sr_{0.15}MnO_3)$ composite cathodes were fabricated by formation of YSZ film on triple phase boundary (TPB) of LSM/YSZ/gas. The YSZ coating film greatly enlarged electrochemical reaction sites from the increase of additional TPB. The composite cathode was formed on thin YSZ electrolyte (about 30 Um thickness) supported on an anode and then I-V characterization and AC impedance analyses were performed at temperature between $700^{\circ}C\;and\;800^{\circ}C$. As results of the impedance analysis on the cell at $800^{\circ}C$ with humidified hydrogen as the fuel and air as the oxidant, R1 around the frequency of 1000 Hz represents the anode Polarization. R2 around the frequency of 100Hz indicates the cathode polarization, and R3 below the frequency of 10 Hz is the resistance of gas phase diffusion through the anode. The cell with the composite cathode produced power density of $0.55\;W/cm^2\;and\;1W/cm^2$ at air and oxygen atmosphere, respectively. The I-V curve could be divided into two parts showing distinctive behavior. At low current density region (part I) the performance decreased steeply and at high current density region (part II) the performance decreased gradually. At the part I the performance decrease was especially resulted from the large cathode polarization, while at the part H the performance decrease related to the electrolyte polarization.

• Journal of the Korean Society for Railway
• /
• v.17 no.3
• /
• pp.165-170
• /
• 2014

The resistance to motion of the Korean next-generation high-speed train (HEUM-430X) was assessed on the basis of 12 coasting test runs at coasting speeds up to approximately 380km/h. Two different methods, a linear regression method and a time-integral method, were employed to calculate decelerations from the time-velocity data and the time-distance data, respectively, and an equation of resistance to motion was devised from the deceleration data calculated at each time section. The effect of an improvement of the aerodynamic shape on the resistance to motion was investigated, with the results showing that the running resistance was reduced by about 15% due to these improvements. An increase of approximately 28% of the running resistance was also noted when running in a tunnel relative to running through an open field.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.373-379
• /
• 2001

When a train runs into a tunnel at high-speed, aerodynamic drag suddenly increases and the booming noise is generated at the exit of tunnel. The noise shape is very important to reduce the aerodynamic drag in tunnel as well as on open ground, and the micro-pressure wave that is a source of booming noise is dependent on nose shape, especially on area distribution. In this study, the nose shape has been optimized employing the response surface methodology and the axi-symmetric compressible Navier-Stokes equations. The optimal designs have been executed imposing various conditions of the aerodynamic drag and the micro-pressure wave on object functions. The results show that the multi-objective design was successful to decrease micro-pressure wave and aerodynamic drag of trains.

• Proceedings of the KSLP Conference
• /
• 1994.06a
• /
• pp.87-92
• /
• 1994

- 발성의 공기역학적 측면은 다음 4가지의 인자에 의하여 특징지어진다. a. 성문하부압(Subglottal pressure) b. 성문상부압(Supraglottal pressure), c. 성문저항(Glottal impedance) d. 성문부위의 공기 체적유속(Volume velocity of air of airflow at the glottis) (중략)