• Journal of Cadastre & Land InformatiX
• /
• v.49 no.1
• /
• pp.157-179
• /
• 2019

The Seoul's 2030 Youth-Housing has been regarded as the only option to procure rental housing sites in downtown Seoul. But its supply did not catch up with the initial expectation, and the criticism that it may disrupt the current zoning system of the city has persisted. Consequently, the 2030 Youth-Housing policy has undergone amendments for six times within the last three years, and the significant changes in its guideline also have been made within the last one year. The study, in this context, tries to figure out the tendencies of those changes made in the guidelines so far by analyzing the aspects of the parcels allowable for Youth-Housing as well as the areas allowable for up-zoning. In the process, the propositional logic is to be adopted to draw the scope of the buildable areas for Youth-Housing. For this, the study refines the raw GIS data, inputs the values for each proposition, and proceeds the logical operation to judge every parcel of the city to discern whether it is eligible for a buildable site and/or for up-zoning for Youth-Housing. It is seen that: 1) the buildable sites rather evenly distribute around the peripheral subway-station areas while more concentrating on the quasi-residential and commercial areas; and 2) the areas eligible for up-zoning have the tendency to concentrate more on quasi-residential areas than others.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.523-531
• /
• 2018

The purpose of this paper is to derive priorities and implications for the organic resource conservation policy in the livestock sector. We conducted a survey on the importance-performance of the organic waste resource reclamation of livestock sector using a 5-point Likert scale. The importance average for the resource recycling of livestock organic waste was 3.63 and the average of performance was 3.04. As a result of the IPA on livestock manure recycling measures, it is necessary to improve feed quality, establish a local recycling system, increase demand for compost and liquid, enhance customer linkages, and develop cost reduction technologies. It requires intensive support for promoting the spread of odor reduction technologies and integrated management of biomass. It is necessary to introduce mid- and long-term measures such as the revival of feed in tariff, promote by-product feeding, establish solid fuel process management standards, create hygiene safety standards, develop eco-beads and promotion of feed conversion. It is required to strengthen support for the development of odor reduction technologies and prepare consultative organizations among related departments, develop eco-friendly solid fuel technology, and support policies for renewable energy certification.

• Journal of Navigation and Port Research
• /
• v.44 no.6
• /
• pp.550-556
• /
• 2020

Over the past years, the role of ports in the global network of supply chains has becoming increasingly important, not merely as a physical location for loading and unloading goods, but also as an essential center of economic activity where additional value is added to cargo. Due to the overall growing importance of ports, each country has chosen to adopt hub growth as a primary economic strategy. Northeast Asia in particular, due to its high population density, experiences intense competition between its ports. Busan's port, as a result, has used the establishment of Distripark in order to attract high and stable trade volume, and compete more effectively with other ports in the region. This study estimates the unit cost of the logistic process for the all principal cargos handled at Busan New Port, with the findings revealing that unit cost increases gradually starting with chemical products, LME bulk goods, automobile parts, LME containers, general cargoes, and LME inland transportation goods coming in last. Future research will look more closely at all all categories of cargo handled in the Distrpark of Busan New Port, thereby enabling us to better understand the value created by the port, and how to best implement effective trade volume-attraction strategy.

• (The)Korea Educational Review
• /
• v.24 no.2
• /
• pp.51-79
• /
• 2018

The purpose of this study is to critically reflect on whether the higher education(HE) restructuring & funding policy proposed by the Moon administration can properly tackle the structural problems confronting Korean HE system. The three major structural problems having entrenched during the rapid expansion of Korean HE system since 1945 can be identified as (1) a 'high cost - low efficiency system' based heavily on 4-year private universities, (2) lack of clear distinction of the roles and connection among different types of higher education institutions (HEIs), and (3) provider-oriented education system and culture seemingly still being widespread at Korean HEIs. This study analyzed the validity of Moon Administration's HE restructuring and funding policy from both a macro- and micro-perspective. From a macro-perspective, this study raised concerns regarding the projects to nurture a national university and a government-dependent private university which will require huge public money. In terms of both the feasibility to secure enough funds and the validity of the proposed policy measures in the existence of unclear roles between public and private HEIs in Korea, this study criticized these policies and proposed, as an alternative policy measure, a low-cost and flexibly operated HEIs such as a government-dependent polytechnic, and a measure to increase connection between different types of HEIs. From a micro perspective, this study suggested, based on 'the expanded principal-agent theory (Waterman & Meier, 1998)', that it would be considered to introduce a more flexible approach in designing the level of government intervention depending upon the maturity of quality assurance procedure at individual universities and the level of goal conflicts between government and individual university.

• Journal of Korean Society of Water Science and Technology
• /
• v.26 no.6
• /
• pp.61-72
• /
• 2018

In this study, applicability of the decentralized water supply system were investigated by the high flux evaluation using ceramic membrane with combined pretreatment process. A) filtration process increased the transmembrane pressure of 1.4 kPa and 89.5 kPa on 2 and $5m^3/m^2{\cdot}d$ of filtration flux, respectively, the physical backwashing recovery rate were less than 28.6%. The (B) Coag./Floc. - Sedi. combined process with 4 mg / L of A-PAC showed that the transmembrane pressure increased to within 6 kPa, the physical backwashing recovery rate was over 37.9 % higher than (A) Filtration process. (C) Coag./Floc. combined process showed an increase of transmembrane pressure compared with (B) Coag./Floc. - Sedi. combined process, physical backwashing recovery rate was over 84%. As a result of the membrane fouling analysis using the resistance in series model, the combined pretreatment process showed that the cake resistance (Rc) was more than 92% at membrane filtration flux of $2m^3/m^2{\cdot}d$. In the (C) Coag./Floc. combined process, cake resistance(Rc) was over 86% on high flux conditions. The coagulation floc contained in influent was removed by the membrane, and the cake layer formed with the removed floc was identified as reversible fouling resistance which could be recovered by physical backwashing. The decentralized water supply system, which has the limitation of site area and installation space, is considered to could be operation of high flux of ceramic membrane by applying (C) Coag./Floc. combined process without sedimentation process.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.774-780
• /
• 2021

The auxiliary power unit (APU) of a rotorcraft starts the engine during operation/flying. The APU is composed of a gas turbine engine type. The starting principle of the component is that the electric start motor generates the power required for starting by rotating the shaft. In this study, quality improvement was performed by applying an over-running clutch (ORC) between the APU and the starter motor to secure the operability of the starter motor of the APU mounted on the rotorcraft. The starter motor has the main role of starting the APU, but during operation, it is rotated without load by the rotational force of the APU gear shaft, resulting in friction at the brush. This phenomenon causes abrasion of the brush of the starter motor. Consequently, when the APU operation time increases, the brush life decreases, and the operability of the APU is affected. In this study, an ORC that separates the interlocking between the start motor brush abrasion and the APU operation time was applied to improve the operability/durability of the APU starter motor. The effect was verified through a test, and the technical feasibility of the design change was analyzed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.888-895
• /
• 2020

In the construction industry, off-site construction (OSC) is drawing attention as a production method due to changes in working hours and the supply and demand of manpower. In 1991, there was a policy of spreading and expanding the use of precast concrete (PC) apartment homes, but they have not been actively used so far since they were discontinued due to quality problems. In this study, policy tasks were analyzed to motivate the application of OSC-based PCs in the apartment housing sector, and policy directions were derived by conducting focus group interviews (FGI). Nine policies are suggested regarding the following topics: PC apartment supply quantity provision, priority application of public housing, priority supply of public housing, preferential floor area ratio, funding, tax support, improvement of business area structure, improvement of delivery method, factory certification system, and training of experts. The results of the FGIs are as follows. First, in order to revitalize PC apartment homes, leading efforts from the public sector are required. Second, rather than reorganizing the business sector or introducing a new delivery method, a policy direction that induces the strengthening of cooperation is desirable. Third, PC activation should be promoted on an institutional basis for securing appropriate construction costs and quality.

• Journal of the Korean Regional Science Association
• /
• v.37 no.1
• /
• pp.3-14
• /
• 2021

Due to COVID-19, the importance of public medical facilities, especially hospitals specializing in infectious diseases, is rising. Despite the government's strong will, the establishment of public medical facilities and infectious disease hospitals has not been properly established. This is because the overall system related to the construction of public medical facilities does not sufficiently reflect social and economic changes and the trend of the times. The purpose of this study is to derive limitations and problems related to the guidelines for preliminary feasibility studies of public medical facilities and to present alternatives. This study proposes 'Option Value' as an alternative. Since the option value is a willingness to pay for an uncertain situation, it is theoretically reasonable and reasonable to reflect it as an additional benefit. Normally, the value of existence is not seen, but the system that is seen in a crisis is in the 'medical and health'. Therefore, it is necessary to find a system that is invisible even in the feasibility evaluation in the medical and health, and constantly improve and develop a methodology that can estimate changes in the welfare of citizens within the system. I expect this study to play a role as a catalyst.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.3
• /
• pp.541-550
• /
• 2021

While open-air compost has value as a source of nutrients for crops in agricultural land, it acts as a pollution that adversely affects the environment during rainfall, and management is required. In this study, it was intended to analyze the accuracy of calculating open-air compost volume using fixed-wing UAV (unmanned aerial vehicle) capable of acquiring a wide range of images and automatic path flights and to identify the possibility of utilization. In order to evaluate the accuracy of calculating the three open-air compost volume, ground LiDAR surveys and precision surveys using a rotary UAV were performed. and compared with the open-air compost volume acquired through a fixed-wing UAV. As a result of comparing the calculation of open-air compost volume based on the ground LiDAR, the error rate of the rotary-wing was estimated to be ±5%, and the error rate of fixed-wing was -15 ~ -4%. one of three open-air compost volume calculated by fixed-wing was underestimated as about -15 %, but the deviation of the open-air compost volume was 2.9 m3, which was not significant. In addition, as a result of periodic monitoring of open-air compost using fixed-wing UAV, changes in the volume of open-air compost with time could be confirmed. These results suggested that efficient open-air compost monitoring and non-point pollutants in agricultural for a wide range using fixed-wing UAV is possible.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.27 no.3
• /
• pp.149-158
• /
• 2021

Advances in food packaging play an important role in keeping food manufacturing and food supply safe. Food packaging facilitates the storage, handling, transportation and preservation of food, and also contributes to the minimization of food waste. On the other hand, food packaging materials have high production volumes, short usage times, and accelerate the occurrence of environmental problems related to waste. The circular economy has already been introduced to pursue sustainability through resource conservation and recycling, and to reduce waste and carbon emissions. By activating an eco-friendly economic system that minimizes resource depletion and environmental pollution, reducing, reusing, recycling and redesigning the goals of the circular economy will reduce the impact of food packaging on the environment. This review focused on the safety aspects of recycled food packaging as recycling is currently considered an important means of packaging waste management. Assessing the safety of recycled packaging is very important because recycling can increase the levels of potentially hazardous chemicals in packaging and in the food after they are migrated. Various food packaging materials such as plastic, paper and cardboard, aluminum, steel, and multi-material multi-layers packaging are commonly used, but only the recycling safety of plastic food packaging materials, which is the most used and has a significant increase in post-use problem, is discussed in this review.