Journal of Korea Technical Association of The Pulp and Paper Industry
/
v.34
no.2
/
pp.84-98
/
2002
도공층의 표면과 내부의 공극구조는 도공지에서 중요한 광학적 성질과 인쇄적성에 밀접한 관계가 있다. 이러한 공극은 도공액이 건조됨에 따라 자연적으로 형성되고 공극의 크기와 용적은 도공액의 조성, 원지의 사이즈도, 건조 속도 및 칼렌더 처리 조건 등에 의해 영향을 받는다. 공극구조는 원지의 흡수에 의해 카드 하우스(card house)형 태의 케이크(cake)층의 형성과 바인더 이동(binder migration) 때문에 생성되는 시점에서 이미 두께방향에서 불균일하게 된다. 도공층 표면의 평활도와 백지광택을 향상시키기 위하여 칼렌더 처리를 행하는데 이 때 도공층 표층의 큰 공극이 압축되어 치밀화현상이 일어나, 공극구조는 한층 더 불균일하게 된다.
Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
/
2003.10a
/
pp.176.1-176
/
2003
제주지역 양조산업의 산업화 기술 개발의 일환으로 제주지역의 대표적인 전통 좁쌀 약주 제품에 대하여 유통 과정 중에 발생하는 침전 형성을 방지하는 기술을 개발하기 위하여 여과 공정 개선에 관한 연구를 실시하고 개선 방안을 제시하였다. 각종 공극 크기의 유리 막 여과지와 중공사막 카트리지 여과 연구 결과, 이 좁쌀 약주 제품에서 대부분이 침전 형성 가능한 입자들은 1.2$\mu\textrm{m}$여과 매질 공극 크기에 의한 여과에 의하여 제거 되여 보통의 소비에 문제가 되는 침전은 잘 않되는 것으로 조사되었다. 현재 제품 제조 현장에서 사용되고 있는 l$\mu\textrm{m}$ 공극 크기 원통형 정밀 여과기인 경우 이론적으로는 합당하나 여과 매질에 대한 산업 인 공극 크기에 대한 오차 한계인 $\pm$20-30% 때문에 일부제품에서 침전 발생하는 것으로 분석되었다. 또한 4$^{\circ}C$와 실온을 48시간씩 반복하면서 3개월간 저장 중 유리 막 여과지인 경우는 0.7$\mu\textrm{m}$ 공극크기의 여과에서도 세밀한 관찰에 의하여 침전형성이 관찰되었으나 중공사막인 경우에는 0.45$\mu\textrm{m}$에서도 전연 침전형성이 관찰되지 않았다. 따라서 완벽한 침전 형성 방지를 위해서는 최종 여과공정에 중공사막 여과 시스템 도입이 효과적이며, 설계 기준은 0.45$\mu\textrm{m}$ 공극과 내경 1mm정도의 중공사막을 유효 여과 면적 1$m^2$정도를 가지도록 하는 중공사막 여과 시스템인 경우 여과 능력은 약400ι/hr로 계산되었다.
KSCE Journal of Civil and Environmental Engineering Research
/
v.30
no.2C
/
pp.109-117
/
2010
Gas hydrate dissociation can generate large amounts of gas and water in gas hydrate bearing sediments, which may eventually escape from a soil skeleton and form voids within the sediments. The loss of fine particles between coarse particles or collapse of cementation due to water flow during heavy or continuous rainfall may form large voids within soil structure. In this study, the effect of void formation resulting from gas hydrate dissociation or loss of some particles within soil structure on the strength of soil is examined. Glass beads with uniform gradation were used to simulate a gas hydrate bearing or washable soil structure. Glass beads were mixed with 2% cement ratio and 7% water content and then compacted into a cylindrical sample with five equal layers. Empty capsules for medicine are used to mimic large voids, which are bigger than soil particle, and embedded into the middle of five equal layers. The number, direction, and length of capsules embedded into each layer vary. After two days curing, a series of unconfined compression tests is performed on the capsule-embedded cemented glass beads. Unconfined compressive strength of cemented glass beads with capsules depends on the volume, direction and length of capsules. The volume and cross section formed by voids are most important factors in strength. An unconfined compressive strength of a specimen with large voids decreases up to 35% of a specimen without void. The results of this study can be used to predict the strength degradation of gas hydrate bearing sediments in the long term after dissociation and loss of fine particles within soil structure.
Excavation of an opening in a saturated porous rock may lead to the development of pore pressure around the opening due to the redistribution of initial rock stresses. The built-up of pore pressure, in turn, may affect the mechanical behavior of rock mass and give the different pattern of stress distribution around the opening from that of the case where the coupling is neglected. In this study, the short time response of an opening excavated in saturated ground under anisotropic initial stress conditions was investigated numerically. Not on the wall of opening but at a short distance from the wall, the tangential stresses were peak during the short period after excavation when the hydro-mechanical coupling is considered.
This study was performed to clarify the formation procedure of continuous voids in cellular concrete, and to examine the effect of a foaming agent on the manufacture of cellular concrete with continuous voids. By the experiments, it was determined that cellular concrete to be formed with continuous voids is influenced by temperature, viscosity and flowability of cement paste, and stability of air voids, and is formed in accordance with cohesion of air voids. It was also found that separate voids are formed at an added amount of air voids corresponding to 2 % or less of the amount of cement, whereas an antifoaming phenomenon occurs when the added amount of air voids exceeds 9 % of the amount of cement. In products with respective cement fineness of 3,000, 6,000, and 8,000㎠/g, a higher compressive strength was exhibited at a higher cement fineness. The continuous void ratio depending on a variation in fineness was 38 %, 52 %, and 22 % in those products, respectively. That is, a highest continuous void ratio was exhibited at a cement fineness of 6,000㎠/g. When the water-cement ratio was reduced from 45% to 25%, the compressive strength of the cellular concrete was increased from 15 kgf/㎠ to 20 kgf/㎠ Thus, the reduction in water-cement ratio was effective in achieving an increase in strength without any variation in the specific gravity of the cellular concrete.
Journal of the Korean Recycled Construction Resources Institute
/
v.11
no.1
/
pp.79-88
/
2023
In this study, a development of the rust formation arising from steel corrosion was modelled to quantify the structural impact in steel reinforced concrete. The interfacial gap, cover depth and diameter of steel rebar were taken for variables in modelling. It was found that the interfacial gap was the most influencing on the structural limit at steel corrosion, followed by steel diameter and cover depth. At 75 mm of cover depth with 20 mm of the steel diameter, the rust amount to reach cracking accounted for 16.95-27.69 ㎛ to 1-10 ㎛ of the interfacial gap. It was found that there was no risk of cracking and structural limit until the rust was formed within the interfacial gap. With a further formation of rust, the concrete section was successively behaved to yielding, cracking and failure. Additionally, the interfacial gap was the most dominant parameter for the rust amount to reach the cracking of concrete at the interfacial zone, whilst the cover depth had a marginal effect on cracking but had a crucial influence on the rust to failure.
Magazine of the Korean Society of Agricultural Engineers
/
v.26
no.3
/
pp.100-107
/
1984
농축산 배설물을 호기성 환기처리하여 토양에 환원이용을 목적으로 컴포스트(Compost)화 할 때에 공극률(Pore space)에 미치는 물리적인 자 성설의 상화관계를 공명하고져 실험을 수행하였다. 본 연구는 여러가지 수준의 압축력에 따른 첨가 재료의 공극률 변화 과정 측정하고 이와 동시에 서로 다른 5종류의 재료별 입자 크기에 대하여 영수률, 용적 중량, 용적 밀도 및 입자 대소가 공극률에 미치는 영향을 조사분석 하였으며 그 결과는 아래와 같다. 1. 세립자 재료의 용적 밀도는 세립자보다 더욱 크게 나타났다. 2. 염수률과 용적 중량이 증가하면 용적밀도는 커지나 공극률은 감소하였다. 3. 공극률은 영수률과 용적 중량보다 첨가재료의 입자크기와 대소분포에 더욱 커다란 영향을 받고 있었다. 4. 영수률이 55~65%이고, 용적중량이 0.25~0.38g/cm2이며 입자크기가 1.5~5cm인 범위내의 효율적인 콤포스트화에 있어서 공극률은 65~80%의 범위를 형성하고 있음을 알 수 있다.
Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
/
2001.04a
/
pp.76-76
/
2001
종이가 가지는 공극 특성은 종이의 광학적 특성에 지대한 영향을 미칠 뿐만 아니라 인쇄용 지로서 사용될 때 잉크의 다공성 기질로서 잉크의 잔류 특성에도 큰 영향을 미친다. 특히 다공성 기지의 표변에 유동성이 뛰어난 물질이 가해 질 때, 이들의 유동 특성은 기질이 지 니고 있는 공극율과 공극의 분포에 따라 큰 차이를 나타내는 것으로 알려져 있다. 이러한 공극성은 백상지의 경우 사용된 펄프의 혼합 비율과 충전제의 사용량 그리고 펄프의 고해 정도에 따라 종이의 공극울이 달라진다. 종이의 공극성이 광학적 특성과 밀접한 연관성을 지니는 것은 종이의 광산란 계수를 결정하기 때문이다. 잘 알려진 바와 같이 종이의 광산란 계수는 빛의 산란과 관계되어 백색도와 백감도에 영향을 미친다. 그러나 도공지가 인쇄 용 지로 사용 될 경우, 도공지 표면에 도피되는 영크층은 도공지가 가지고 있는 구조적 특성을 변화시킬 수 있는 제3의 요인으로 간주 될 수 있다. 결국, 인쇄가 완료된 종이의 경우 원지층, 도공층 그리고 잉크층으로 구성된다. 따라서 다양 한 공극 구조를 가지는 기질위에 잉크가 도피될 경우 기질의 공극 특성에 따라 잉크 조성분 의 침투 거동에도 많은 차이가 있을 것으로 예측된다. 잉크의 구성 요소를 살펴보면 잉크의 색상을 결정하는 안료, 단일의 각 안료 입자를 도포하여 인쇄판으로부터 종이까지 운송시키 는 기능과 인쇄기에서 잉크의 유동성을 유지하고 종이 또는 기타 피인쇄체에 전이된 후에는 건조막을 형성하는 비히클 그리고 각종 기능성 첨가제로 구성되어 있다. 동일한 성분으로 구성된 잉크를 사용하여 각각 공극성이 다른 피인쇄체 위에 인쇄 될 경우 이들 조성분의 이 동과 표면 잔류 특성에 변화가 있을 것으로 생각된다. 즉 공극성이 풍부한 기질에 도피된 잉크는 반대의 경우와 비교하여 보다 많은 조성분이 종이의 공극 속으로 침투하게 될 것이 다. 이 과정에서 특히 미세한 안료 입자의 경우 피인쇄체의 표면 공극을 채우고, 비히클의 경우 미세한 공극속으로 침투되어 경화됨으로써 피인쇄체가 지니고 있는 공극량을 감소시커 게 될 것이다. 그리고 피인쇄체의 각종 형태의 공극으로 침투된 잉크의 양에 반비례적으로 피인쇄체의 표변에 잉크가 잔류하게 될 것이다. 따라서 본 연구에서는 여러가지 안료를 사용하여 각각 다른 공극 특성을 지니는 도공지를 제조한 후 이들이 가지는 공극 특성과 잉크의 잔류 거동에 대해 고찰해 보고자 하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.