• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.267-267
• /
• 2004

엔드밀은 산업현장에서 정밀 금형과 다이 제조 시 넓게 사용되는 절삭 공구이며 공작기계의 향상에 따라 많은 발전을 거듭해 왔다 공작기계의 고속화에 따라 공작기계의 측면에서는 강성 증가, 열변형의 억제와 동적 안정성의 개선 및 응답성 개선을 통하여 정밀도를 향상시키고 이송속도와 절삭속도의 증가를 통해 생산성을 증대시키고 있으며 공구의 측면에서는 새로운 재종 및 코팅기법의 개발을 통해 공구수명의 향상을 달성하고 있다. 또한 공구형상의 최적화를 통해 동적 안정성을 확보하고 가공 정밀도를 개선하고자 하는 다양한 시도가 이루어지고 있다.(중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.150-155
• /
• 1994

종래의 초내열합금은 원자력산업과 우주항공산업등에 주로 사용되었으며, 산업이 고도화되어짐에 따라 각종 산업기계와 자동차 분야에까지 광범위하게 사용되어지고 있다. 대표적인 초내열합금으로서의 인코넬(Inconel)은 인성과 Creep 특성이 우수하고, 특히 고온강도가 높고 화학적으로도 안정하여 부식에도 강한 장점을 지니고 있어 항공기 부품재료로서 최근 각광을 받고 있다. 본 연구에서는 일반적으로 사용되어지고 공구재종인 코팅초경합금공구와 세라믹 공구를 사용하여 초내열합금인 인코넬 600을 절삭가공하여, 절삭저항,공구의 파손 및 마모,칩의 용착현상등의 가공성에 영향을 주는 요인에 대하여 검토함으로써, 공구의 종류에 대ㄷ응하는 적절한 절삭영역을 설정하는 것을 목적으로 하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.2
• /
• pp.228-236
• /
• 2002

In this study, the carbon steels, SM20C were machined with the tungsten carbide tipped circular saw to clarify the cutting-off characteristics in terms of tool wear. The results show that an improved performance in view of both the tool wear and the cutting efficiency was obtained by using oil base cutting fluid at the cutting speed of 100m/min with the feed of 0.06mm/tooth. The rake angle of 10$^{\circ}$ , clearance angle of 8$^{\circ}$ , nose radius of R0.1mm, and end cutting edge champer of 0.1mm$\times$25$^{\circ}$ are believed as the best tool geometries. The tool wear decreases due to using the saw of the disk of STS5 and the tool material of P30.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.1
• /
• pp.72-77
• /
• 2019

In this study, the wear characteristics of end mills for CFRP processing were investigated according to the tool materials and coating types. Three kinds of tool materials and two types of coatings were used for comparing the machining performance. The flank wear of the end mill tool and the surface condition of the workpiece were compared. The K6UF material shows the most excellent performance among the three materials used in the experiment. The Tetrabond coating showed better processability in comparison of two kinds of coatings.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.79.2-84
• /
• 1995

소경드릴 가공은 최근 가공 제품의 소형화, 경량화 등의 추세로 인하여 수요가 급증됨ㅇ 따라 레이져 가공, 전자빔 가공, 전해가공과 같은 전기 물리적 가공법 등이 많이 사용되고 있으나, 생산성 및 정밀도의 면에서 만족스러운 결과를 얻을 수 없는 실정이다. 이에 반해 기계 가공법인 소경드릴 가공은 공구의 강성 저하로 인하여 쉽게 파손이 되고 칩 배출의 어려운 점이 있지만, 가공정밀도가 양호하고 종횡비가 높은 가공이 가능하여 실용화가 좋은 분야라고할 수 있다, 이로 인해 이에 대한 연구가 많이 진행되고 있다. 따라서 본 연구에서는 서로 종류가 다른 고속도강 드릴인 소경드릴을 이용하여 ADI 재료를 절삭가공 할때 비관통 및 단계절삭 가공시에 발생하는 절삭력의 변화에 따른 공구의 마모,가공정도 및 가공조건등을 실험적으로 고찰하여 소경드릴 가공시 발생하는 제반문제점을 해결하고 공구의 마모 및 가공정도가 양호한 최적의 절삭조건을 얻고져 한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04b
• /
• pp.137-142
• /
• 1995

고정밀도와 높은 생산성을 갖는 가공방법은 좋은 제품을 값싸게 제작하여야 하는 당면과제를 해결하기 위하여 필수적인 조건이 되었다. 이를 위하여 우선적으로는 공작기계가 고강성과 고속용 스핀들을 지녀야하며 정밀한 신속한 위치제어가 가능해야한다. 이와 더불어 절삭가공의 최첨병인 절삭공구가 고속가공에서 고정밀도와 오랜수명을 보장하는 우수한 성능 또한 가장 중요한 요소중의 하나이다. 이를 위하여 고속도강으로부터 시작하여 초경합금, ceramic, CBN & PCD 공구로 이르는 고속용 재종개발이 계속되었고 또한 절삭저항의 감소와 원활한 칩배출을 위한 형상개발이 꾸준히 이루어져왔다. 이와 함께 주어진 공작기계와 공구를 사용하여 최고의 효율과 정밀도를 유지할 수 있는 최적의 절삭조건의 선정과 적용 또한 중요하다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.5
• /
• pp.1055-1062
• /
• 1988

The characteristics of tool wear and the machinability in cutting of GFRP have been studied. The wear behavior of carbide insert tools(P20, M10, K10) and Cermet in TiC grade was studied by turning of changing the cutting condition. Machinability could be estimated as the following empirical formula, CT$^{n}$ =W The main results obtained are as follows: (1) Dependence of rate of tool wear on cutting speed; with increases of cutting speed, the rate of tool wear initially increases gradually(1st range), then it increases proportionally to cutting speed(2nd range), and finally the rate is constant(3rd range). (2) When the contact length has a main, effect on tool wear, the cutting speed does nit affect the tool wear. On the contrary, the cutting speed has a main effect on tool wear, the contact length does not affect the tool wear. (3) The order of machinability is K10, M10, P20 and Cermet in TiC grade.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.2
• /
• pp.38-44
• /
• 2008

Titanium and its alloys, due to their superior properties of high specific strength and excellent corrosion resistance, are increasingly used in living applications in the 21century. The applications in aerospace and medical industries demand machining process more frequently to obtain a desired product. But unfortunately, this material is one of the most difficult-to-cut. In the turning process of titanium alloys, the key point for successful work is to select proper tool materials and cutting conditions. This study suggests a guidance for selecting the tool materials and the cutting speeds to improve tool life and surface integrity in Ti-6Al-4V titanium turning process. The experiments investigate the change of surface roughnesses, cutting forces and flank wear with various cutting parameters of tool materials, depth of cuts and feeds. As the results, K10 type of insert tip was assured as the best for turning of Ti-6Al-4V titanium alloy.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.12
• /
• pp.47-54
• /
• 2008

Hard turning process can be defined as a single-point machining process carried out on "hard" materials. The process is intended to replace or limit traditional grinding operations that are expensive, environmentally unfriendly, and inflexible. The purpose of this study is to achieve a systematic understanding of machining characteristics and the effects of machining parameters on cutting force, tool wear shape and chip formation by the outer cutting of a kind of wear resistant tungsten carbide V30. Hard turning experiments were carried out on this alloy using the PCD (Poly Crystalline Diamond), cBN (cubic Boron Nitride) and PcBN (Polycrystalline cubic Boron Nitride) cutting tools. The PcBN and the usual cBN tools were used to be compare with the PCD tool and the dry turning was carried out. The PcBN is attractive as the tool material which replaces the PCD. The tool wear width and cutting force were measured, and the worn tool and chip were observed. The difference of the tool wear mechanism among the three tool materials was investigated.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.169-172
• /
• 1995

In optmizing cutting condition for face milling operation, tool wear is an important maching factor. For the purpose of establishing the relationship between various maching factor and tool wear, cutting tests have been performed. As a result, hardness and chemical composition of workpiece material, chemical compositition and grain size of cutting tool and cutting speed have been selected as machining factor. In addition, relationship between feed rate and workpiece hardness has been observed. Prior to utilizing cutting condition recommended by 'Machining Data Hardbook(MDH)' as a Knowledge base, an analysis for the validity has been provided. Based on this analysis, tool life criteria applied by MDH has been modifiied. Finaly, using MDH recommended data for neural network trainning, we can compensate the result form the trained neural network for optimizing cutting condition for some given workpice and cutting tool.