• Korean Journal of Plant Taxonomy
• /
• v.41 no.2
• /
• pp.108-112
• /
• 2011

The pollen of 5 taxa on Korean Oldenlandia L. was investigated by LM and SEM. The pollen grains were monads, $20.7-36.0{\mu}$m in polar length, with an equatorial diameter of $21.0-38.4{\mu}m$. The pollen shapes were oblate-spheroidal or spherical (P/E ratio 0.93-1.00). The apertures numbered 3-7 in number, colporate in shape, with a colpus length of $4.2-20.4{\mu}m$ and a colpus width of $2.6-3.4{\mu}m$. The sexine was $0.9-2.4{\mu}m$ in terms of its thickness, the surface pattern was reticulate, scabrate or neither. Based on these results, the size of the pollen grain, the number of apertures, and the surface pattern of the sexine were all useful for an interspecific classification. The genus Neanotis, established via the pollen characteristics, was thought to be reviewed in its entity regarding the continuous variation of generic characteristics.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.5
• /
• pp.354-361
• /
• 2010

The paper presents an efficient computation of optimal tool length for 5-axis mold & die machining. The implemented procedure processes an NC file as an initial input, where the NC data is generated by another commercial CAM system. A commercial CAM system generates 5-axis machining NC data which, in its own way, is optimal based on pre-defined machining condition such as tool-path pattern, tool-axis control via inclination angles, etc. The proper tool-length should also be provided. The tool-length should be as small as possible in order to enhance machinability as well as surface finish. A feasible tool-length at each NC block can be obtained by checking interference between workpiece and tool components, usually when the tool-axis is not modified at this stage for most CAM systems. Then the minimum feasible tool-length for an NC file consisting of N blocks is the maximum of N tool-length values. However, it can be noted that slight modification of tool-axis at each block may reduce the minimum feasible tool-length in mold & die machining. This approach can effectively be applied in machining feature regions such as steep wall or deep cavity. It has been implemented and is used at a molding die manufacturing company in Korea.

• Korean Journal of Materials Research
• /
• v.11 no.4
• /
• pp.258-265
• /
• 2001

Compression and bending test have been conducted to evaluate the mechanical performance of CFRC at several different temperature up to $2000^{\circ}C$ . Tools and several grips for the test at high temperature were designed to obtain mechanical properties of CFRP. A major cause of increasing strength according to increasing the density and the temperature were analyzed. SEM method was utilized to find out the damage and the fracture mechanism. The new simple equation for the L(span length)/h(beam height) of specimens and for the failure criterion on the 4 point bending were proposed.

• The Journal of Engineering Geology
• /
• v.16 no.4 s.50
• /
• pp.337-349
• /
• 2006

Seven hundred and fifty one fractures of the rhyolitic tuffaceous rock masses were mapped using 6 scanlines placed on rock slope exposures that were within 8.02 km of Busan-Ulsan highway. These data were analyzed to find the number of fracture sets that exist in the rock slopes and the probability distributions of orientation, spacing, trace length and fracture size in 3-D for each of the fracture sets. All the fracture set orientation distributions exhibit high variability. The Fisher distributions were found to be unsuitable to represent the statistical distribution of orientation for most of the fracture sets. The probability distributions, gamma, exponential and lognormal were found to be highly suitable to represent the distribution of spacing and semi-trace length of fracture sets. In obtain-ing these distributions, corrections were applied for sampling biases associated with spacing and trace length. The generated fracture system in 3-D was used to make predictions of fracture traces for each fracture set on 2-D win-dows. Developed stochastic 3-D fracture network for the rock mass was validated by comparing statistical proper-ties of the observed fracture traces on scanlines with the predicted fracture traces on the scanlines. This exercise fumed out to be successful.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.189-193
• /
• 2003

금형가공에 있어서 밀링머신의 가공에서는 절삭가공의 잔유물인 버(Burr)가 생성되고, 이러한 버는 가공의 정밀도를 감소시킬 뿐만 아니라 후처리과정(Deburring)을 야기시킴으로 인해서 작업효율의 감소 및 생산성의 비효율적 낭비를 가져오게 된다. 따라서, 정밀도와 작업효율을 극대화하긴 위해서는 버의 생성원리를 파악하고, Exit Burr의 생성부분을 미리 예측하여 버의 생성을 최소화 할 수 잇는 작업 가공계획을 설계하여야 한다. (1)기존의 Burr Exit System에서는 피삭재의 단면형상인 Line과 Are처럼 단순한 형상뿐만 아니라, Line과 Are가 연결되어있는 복잡란 형상에 대해서도 버를 판별한다. 그리고, 가공 후 버가 생성되는 부분을 예측하고, 이때의 Exit Angle을 계산하여 이에 해당하는 기 실험결과 DataBase와 연동하여 생설될 버의 형상과 크기 등의 결과를 제공하여 준다. 더불어, 피삭재의 단면형상이 여러 가지 복합적인 형상으로 이루어져 있는 경우와 다양한 공구 경로까지 고려하여 실제가공과 거의 유사란 상황을 적용할 수 잇는 알고리즘으로 개발하였다. 본 논문에서는 이제까지 개발된 다양한 형상에 대한 Exit Burr 판별 알고리즘을 이용하여 임의형상을 가진 피삭재의 다중가공경로 상에서 발생 가능한 버를 예측하고, 버의 길이나 가공시간 들을 정?화 하여 최적화하는데 필요란 요소를 추출해 보고자 한다. 또한, 이를 인용하여 Face Windows에서의 버의 발생을 최소화 할 수 있는 최적 절삭가공 공구경로를 제시하여, 작업 효율성을 극대화하는 알고리즘을 Windows 응용 프로그램으로 구현하고자 한다.생성하기보다는 기존에 발생된 구매 지시의 우선적 사용과 기존 구매 지시의 납기 일자를 고객 납기에 가장 잘 맞출 수 있도록 변경하는 방안을 제시한다. 이렇게 함으로써 최대한 고객 납기를 만족하도록 계획을 수립할 수 있게 된다. 본 논문에서 제시하는 계획 모델을 사용함으로써 고객 주문에 대한 대응력을 높일 수 있고, 계획의 투명성으로 인한 전체 공급망의Bullwhip effect를 감소시킬 수 있는 장점이 있다. 동시에 이것은 향후 e-Business 시스템 구축을 위한 기본 인프라 역할을 수행할 수 있게 된다. 많았고 년도에 따른 변화는 보이지 않았다. 스키손상의 발생빈도는 초기에 비하여 점차 감소하는 경향을 보였으며, 손상의 특성도 부위별, 연령별로 다양한 변화를 나타내었다.해가능성을 가진 균이 상당수 검출되므로 원료의 수송, 김치의 제조 및 유통과정에서 병원균에 대한 오염방지에 유의하여야 할 것이다. 확인할 수 있었다. 이상의 결과에 의하면 고농도의 유기물이 함유된 음식물쓰레기는 Hybrid Anaerobic Reactor (HAR)를 이용하여 HRT 30일 정도에서 충분히 직접 혐기성처리가 가능하며, 이때 발생된 $CH_{4}$를 회수하여 이용하면 대체에너지원으로 활용 가치가 높은 것으로 판단된다./207), $99.2\%$(238/240), $98.5\%$(133/135) 및 $100\%$ (313)였다. 각각 두 개의 요골동맥과 우내흉동맥에서 부분협착이나 경쟁혈류가 관찰되었다. 결론: 동맥 도관만을 이용한 Off pump CABG를 시행하여 감염의 위험성을

• Composites Research
• /
• v.13 no.6
• /
• pp.39-46
• /
• 2000

Electrical discharge machining (EDM) cuts metal by discharging electric current across a thin gap between tool and workpiece. Electrical discharge wire cutting, a special form of EDM, uses a continuously moving conductive wire as an electrode, and is widely used for the manufacture of punches, dies and stripper plates. In the wire cutting process, the moving wire is usually supported by cantilever arm and wire guides. As the wire traveling speed has been increased in recent years to improve productivity, the vibration of the cantilever arm occurs, which reduces the positional accuracy of the machine. Therefore, the design and manufacture of the cantilever arm with high dynamic characteristics have become important as the machining speed increases. In this paper, the cantilever arm for guiding the moving wire was designed and manufactured using carbon fiber epoxy composite in order to improve the static and dynamic characteristics. Specimens for the composite cantilever arm were manufactured and tested to investigate the effect of the number of reinforcing plies and length fitted to steel flange on the load capacity. Also, the finite element analysis using layer and contact elements was performed to compare the calculated results with the experimental ones. From the results, the prototype of the composite cantilever arm for the electrical discharge wire cutting machine was manufactured and the static and dynamic characteristics were compared with those of the conventional steel cantilever arm.

• Tunnel and Underground Space
• /
• v.23 no.2
• /
• pp.110-119
• /
• 2013

It is generalized to measure the arch settlement and convergence during tunnel construction for monitoring its mechanical stability. The initial convergence rate a day is defined from the first convergence measurement and the final convergence defined as the convergence measured lastly. The initial and the final tunnel arch settlement are defined like the preceding convergence. In the study, the relations between the initial and final displacements of a shallow tunnel are analyzed. The measurements were performed in the tunnel of subway 906 construction site in Seoul. The overburden is 10-20 m and the tunnel goes through weathered soil/rock. The width and height of the tunnel are about 11.5 m, 10m, respectively. So this is a shallow tunnel in weak rock. The length of tunnel is about 1,820 m and the tunnel was constructed in 2 stages, dividing upper and lower half. The numbers of measurement locations of arch settlement and convergence are 184 and 258, respectively. As a result, the initial displacement rate and the final displacement are comparatively larger in the section of weathered soil.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.281-281
• /
• 2011

산업 환경에서 친환경 및 에너지효율성을 중요한 조건이 되면서 고효율성 및 다기능을 가진 재료에 대한 연구가 활발히 진행 되고 있다. 특히 Al-Ti-N 코팅은 이미 경도 측면에서 우수 하여 고속 공구 부품에 널리 사용되고 있고 최근에 Al-TiN에서 Si 첨가는 40GPa이상의 고경도와 1000도 이상의 산화온도를 지닌 나노 혼합물 코팅을 형성 시키는 것으로 알려져 있다. 본 연구에서 Al-Ti에 Si, Cu, Cr 을 첨가하였을 때 코팅을 형성하였을 때 바뀌는 물성 변화을 확인하였다. 이러한 연구를 위해 Al-Ti 합금 조성 중 가장 우수한 것으로 알려진 60:40으로 타겟을 만들어 스퍼터 장비를 이용해 코팅을 형성하여 기초 실험을 진행하였다. 그 근거로 하여 3원계인 Si, Cu, Cr 을 첨가하여 각각의 단일 타겟으로 만들고 코팅을 형성하였다. 타겟과 코팅의 성분이 동일한지 확인하기 위해 EPMA분석을 하였고 그 결과 오차 범위 내에 동일한 것으로 확인하였다. 또 내산화성 테스트를 위해 400도에서 1000도로 가열된 대기 중에 코팅 층을 1시간씩 노출시키는 공정을 통해 확인하였고 내식성 테스트는 SUS 304계열 위에 코팅을 하여 Potentiodynamic polarization scan 장비로 비교해 보았다. 표면경도는 3원계 코팅인 경우 질소비율이 증가할수록 30GPa ~ 35GPa까지 증가하였고 XRD 분석 결과와 비교 시 (111), (200) peak가 명확할수록 경도 값이 높은 것으로 확인하였다. 마모테스트 결과 3원계인 코팅 층이 dry상태에서 감소하는 경향을 보였다. 특히 0,26까지 감소한 Si 을 첨가한 코팅 층은 H/E지수도 좋아 마모트랙의 길이도 짧아 우수한 것으로 알 수 있었다. 이런 결과에서 보듯 3원소 이상 첨가 시 특성변화가 차이가 있다는 것을 알 수 있었다.

• Journal of Bio-Environment Control
• /
• v.30 no.4
• /
• pp.287-294
• /
• 2021

In order to expand facility agriculture and reduce greenhouse construction costs in reclaimed land, a greenhouse foundation method that satisfies economic feasibility and structural safety at the same time is required. As an alternative, the allowable bearing capacity and settlement were reviewed when the DCM(Deep cement mixing) method was applied among the soft ground reinforcement methods. To examine the applicability of the greenhouse foundation, the allowable bearing capacity and settlement were calculated by applying the theory of Terzaghi, Meyerhof, Hansen, and Schmertmann. In case of the diameter of 800mm and the width and length of the foundation of 4m, the allowable bearing capacity was 179kN/m² and the settlement was 7.25mm, which satisfies the required bearing capacity and settlement standards. The calculation results were verified through FEM(Finite element method) analysis using the Mohr-Coulomb material model. The allowable bearing capacity was 169kN/m² and the settlement was 2.52mm. The bearing capacity showed an error of 5.6% compared to calculated value, and the settlement showed and error of 65.4%. Through theoretical calculations and FEM analysis, it was confirmed that the allowable bearing capacity and settlement satisfies the design criteria as a greenhouse foundation when the width and length of the foundation were 4m. Based on the verified design values, it is expected to be able to present the foundation design criteria for greenhouses through empirical tests such as bearing capacity tests and long-term settlement monitoring.

• Korean Journal of Environment and Ecology
• /
• v.22 no.1
• /
• pp.18-34
• /
• 2008

Based on external morphology, each of five species can be classified into three groups: 1) B. falcatum group (B. falcatum, B. scorzonerifolium), 2) B. euphorbioides group (B. euphorbioides) and 3) B. longiradiatum group (B. longiradiatum, B. latissimum). B. falcatum group has cauline leaves linear or lanceolate in shape and attenuate at base and not surrounding the stem. In contrast, B. longiradiatum group and B. euphorbioides group have cauline leaves ovate, lanceolate or panduriform in shape and auriculate or cordate at base and completely surrounding the stem. The inflorescence is basically compound umbels terminated at the apex of stem. But B. euphorbioides group is small in size and pedicels are rather short and the number of the pedicel is ca. 20. On the other hand, B. longiradiatum and B. falcatum groups are large in size and their pedicels are long and the number of the pedicel is around 10. The pore of pollen aperture of B. longiradiatum and B. latissimum is partially projected or not while those of B. falcatum group and B. euphorbioides is usually remarkably projected. The number of somatic chromosomes was counted as 2n=20 in B. falcatum, 2n=12 in B. scorzonerifolium and B. longiradiatum, and 2n=16 in B. euphorbioides and B. latissimum. Although chromosome numbers of B. euphorbioides and B. latissimum are the same, the two species are not likely to relate because the karyotypes of the two species are different from each other. Based on these observations, it can be concluded that B. latissimum is most closely related to B. longiradiatum. However, molecular data indicated that the species is probably related to B. bicaule distributed in central Siberia. In terms of conservation of B. latissimum, overexploitation by human and grazing by goat are most threatened factors.