• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.88-93
• /
• 2003

국토공간정보의 기반인 수치지도 제작을 위해서는 위치에 대한 정확한 정보가 요구되며 이러한 정보는 GPS를 이용한 방법이 대표시 되고 있다. 우리나라도 GPS를 이용한 위치결정 방법의 효율성과 정확성을 확보하기 위해 전 국토에 걸쳐 24시간 위성데이터를 취득할 수 있는 70여개의 GPS 상시관측소를 설치 운영하고 있다. 따라서 본 연구는 GPS 상시관측소 데이터의 효과적인 활용 방안을 모색하기 위해 행정자치부와 국리지리원에서 설치 운영하며 호남권에 위치한 5곳의 상시관측소를 대상으로 각기 고정위치를 달리하여 기선해석과 망조정을 수행하여 고정위치에 따른 3차원 절대좌표의 정밀도를 분석하였다. 현재 행정자치부의 3곳의 상시관측소 절대위치는 고시되지 않아 국립지리원 고시 성과를 기준으로 고시성과와 계산성과의 3차원 절대 좌표를 비교하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.10
• /
• pp.130-138
• /
• 2002

This paper presents the modeling and analysis of dynamic characteristics of hydraulic snubber in electric power plant. The nonlinear state-space model of 14th order to describe the dynamics of the snubber was established by Simulink. The simulation results show that the hydraulic snubber reacts as like the conventional shock absorbers against the high pulse shock load. The snubber also shows the peculiar characteristics to the small step load, which temporarily lock the control valves up, however maintain same steady-state pressures of all internal chambers in the long run. Two case studies for the analysis of the snubber were addressed. Practical pulse testing method was also proposed to identify the frequency response characteristics of the snubber.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.04a
• /
• pp.43-47
• /
• 1992

물체공간의 한점에서 출발하여 광학계에 입사한 광속은 전부 상공간의 한점에서 집속되고 물체공간의 점 과 상공간의 점은 1:1로 대응해야 하나 현실의 광학계는 필히 수차가 존재하기때문에 이상 결상을 맺지 못다. 이러한 원인으로 생기는 수차를 통상의 방법으로 제거 할 수 없을때 비구면 LENS를 사용한다. 비구 면 LENS는 축대칭성을 갖고 단면형상이 다항식으로 표현되는 곡면을 갖는 LENS로 종래의 구면체로 구성 된 광학계에서 보정될 수 없었던 수차를 근본적으로 제거한다. 또한 비구면 LENS를 사용하므로써 화질 의 향상을 기할 수 있고 LENS 매수를 줄임으로써 LENS계 전체의 COMPACT 화, COST DOWN, 중량경감이 가능한 잇점이 있다. 지금까지 이러한 장점이 있는 비구면 LENS가 사용되지 못했던 것은 설계기술보다는 생산기 술에 있었는데, 최근 비구면 LENS 가공이가능한 기계와 LASER를 이용한 측정기술, MOLD MASTER에 의한 사출기술이 발전함에따라 PLASTIC LENS의 양산이 가능하게 되었다. 본 고에서는 신 제품 개발능력 확보와 제품경쟁력 향상을 목적으로 개발한 비구면 LENS 금형의 초정밀가공 정도 (비구면 가공정도 : FORM ERROR 0.2 .mu. m 이하) 달성방법과 측정평가에 대해 논했다.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.7 s.172
• /
• pp.102-111
• /
• 2005

In this paper, we address a position control for a parallel stage, which is levitated and driven by electric magnetic force. This consists of a levitating object (called platen) with 4 permanent magnetic linear synchronous motors in parallel. Each motor generates vertical force for suspension against gravity and propulsion force horizontally as well. This stage can generate six degrees of freedom motion by the vertical and horizontal force. A dynamic equation of the stage system is derived based on Newton-Euler method and it's special Jacobian matrix describing a relation between the limited velocity and Cartesian velocity is done. There are proposed two control methods for positioning which are Cartesian space controller and Actuator space controller. The control performance of the Cartesian space controller is better than the Actuator space controller in task space trajectory while the Actuator space controller is simpler than the Cartesian space controller in controller realization.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.539-540
• /
• 2006

It is so difficult to small amounts of two or more fluid species into single in microchannel because flows are usually laminar. In this regard multilamination micro mixer including recirculation zone is presented. Alternating feed micro channels make multilamination and converging-diverging channels form recirculation zone. Multilamination with geometric focusing decreases diffusion path ana recirculation zones make vortex. In this paper flow patterns and mixing properties of multilamination micro mixer including recirculation zone were investigated by Computational Fluid Dynamics (CFD). The CFD results provided qualitative information on mixing.

• Journal of the Korean Magnetics Society
• /
• v.5 no.1
• /
• pp.79-85
• /
• 1995

A precise magnetic field probe was designed to measure the field distribution inside a superconducting magnet. The operation principle of the developed equipment is based on cw-NMR. The range of field is from 2.8 T to 5.8 T, and the resolution is better than 0.3 ppm NMR samples were water and heavy water contained in a tube of 4 mm diameter and 4mm height. This equipment can be manufactured very inexpensively compared with the currently available commertial ones.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.5_6
• /
• pp.213-222
• /
• 2003

Most existing algorithms adopt the forward mapping method that is based on vector representation. Problem of existing algorithms Is the exponential increase of memory usage with number of layers. This degrades the accuracy of the boundary pattern representation. Our method uses bitmap representation and does not require any additional post-processing for conversion of vector-form results to bitmap-form. A new and efficient algorithm is presented in this paper for the generation of hyperbolic patterns by means of backward mapping methods.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.279-279
• /
• 2015

최근 기후변화로 인해 이상기후 현상이 지속적으로 발생하고 있으며 이로 인해 산사태나 토석류와 같은 산재재해가 발생하여 인근 도심에까지 영향을 끼치고 있다. 본 연구에서는 해마다 빈번하게 발생하고 있는 산지 토사재해의 피해저감과 원인분석을 위하여 과거 강원도 인제군에서 발생한 산사태 및 토석류가 발생 현장을 조사하였고 발생유역의 특징을 분석하기 위해 GIS기법을 이용하여 기후, 지질, 지형, 토양 등의 공간자료를 구축하고 보다 정밀한 지형인자 추출을 위하여 지상 LiDAR를 활용하여 토석류 발생현장을 스캔하고 3D 지형자료를 구축하였다. 추후 공간자료와 3D지형자료를 활용하여 토석류 발생량 추적이나 확산 범위등 정밀 분석의 기초자료로 활용 될 것이다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.5
• /
• pp.345-355
• /
• 2023

An analysis of covariance and Pearson correlation coefficient were performed to identify the relationship between both variables: traffic volume and crack. For this, it was carried out to analyse 216 tunnel inspection/diagnosis results with respect to the traffic. As a result, it has been proven that traffic volume and cracks in concrete linings are highly correlated. Therefore, it is recommended to consider traffic volume in planning of preemptive maintenance such as crack repair, etc.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.2
• /
• pp.78-90
• /
• 2021

In order to construct a precision geoid, it has been diversified into land, sea, aviation, and satellite gravity measurement methods, and measurement technology has developed, making it possible to secure high-resolution, high-precision gravity data. The construction of precision geoids can be fast and conveniently decided through GNSS surveys without separate leveling, and since 2014, the National Geographic Information Institute has been developing a hybrid geoid model to improve the accuracy of height surveying based on GNSS. In this study, the results of the GNSS height measurement were compared and analyzed choosing existing public reference points to verify the GNSS height measurement of public surveys. Experiments are conducted with GNSS height measurements and analyzed precision for public reference points on coastal, border, and mountainous terrain presented as low-precision areas or expected-to-be low-precision in research reports. To verify the GNSS height measurement, the GNSS ellipsoid height of the surrounding integrated datum to be used as a base point for the GNSS height measurement at the public datum. Based on the checked integrated datum, the GNSS ellipsoid of the public datum was calculated, and the elevation was calculated using the KNGeoid18 model and compared with the results of the direct level measurement elevation. The analysis showed that the results of GNSS height measurement at public reference points in the coastal, border, and mountainous areas were satisfied with the accuracy of public level measurement in grades 3 and 4. Through this study, GNSS level measurement can be used more efficiently than existing direct level measurements depending on the height accuracy required by users, and KNGeoids 18 can also be used in various fields such as autonomous vehicles and unmanned aerial vehicles.