• Journal of the Mineralogical Society of Korea
• /
• v.31 no.4
• /
• pp.295-306
• /
• 2018

Despite the utility of solid-state NMR, NMR studies of iron-bearing silicate glasses remain a challenge because the variations in the peak position and width with increasing iron content reflect both paramagnetic effect and iron-induced structural changes. Therefore, it is essential to elucidate the effect of temperature on the NMR signal for iron-bearing silicate glasses. Here, we report the $^{29}Si$ and $^{27}Al$ MAS NMR spectra for $(Mg_{0.95}Fe_{0.05})SiO_3$ and $Fe_2O_3$-bearing $CaAl_2Si_2O_8$ (anorthite) glasses with varying spinning speed to interpret the NMR spectra for iron-bearing silicate glasses. The increase in the spinning speed results in an increase in the sample temperature. The current NMR results allow us to understand the origins of the changes in NMR signal with increasing iron content and to provide information on the dipolar interaction between nuclear spins. The $^{29}Si$ NMR spectra for $(Mg_{0.95}Fe_{0.05})SiO_3$ glass and $^{27}Al$ NMR spectra for $Fe_2O_3$-bearing $CaAl_2Si_2O_8$ glasses show that the peak shape and position of iron-bearing glasses do not change with increasing spinning speed up to 30 kHz. These results suggest that the NMR signal in the Fe-bearing glasses may stem from the 'survived nuclear spins' beyond the cutoff radius from the Fe, not from the paramagnetic shift. Based on the current results, the observed apparent shifts toward lower frequency of Al peak for $Fe_2O_3$-bearing $CaAl_2Si_2O_8$ glasses with increasing $Fe_2O_3$ at all spinning speed (15 kHz to 30 kHz) indicate the increase in the fraction of ${Q^4}_{Al}$(nSi) with lower n (i.e., 1 or 2) with increasing $Fe_2O_3$ and the spatial proximity between Fe and ${Q^4}_{Al}$(nSi) with higher n (i.e., 3 or 4). The present results show that changes in the NMR signal for iron-bearing silicate glasses reflect the actual iron-induced structural changes. Thus, it is clear that the applications of solid-state NMR for iron-bearing silicate glasses hold strong promise for unraveling the atomic structure of natural silicate glasses.

• Korean Journal of Remote Sensing
• /
• v.39 no.6_1
• /
• pp.1211-1224
• /
• 2023

Clouds cause many difficult problems in observing land surface phenomena using optical satellites, such as national land observation, disaster response, and change detection. In addition, the presence of clouds affects not only the image processing stage but also the final data quality, so it is necessary to identify and remove them. Therefore, in this study, we developed a new cloud detection technique that automatically performs a series of processes to search and extract the pixels closest to the spectral pattern of clouds in satellite images, select the optimal threshold, and produce a cloud mask based on the threshold. The cloud detection technique largely consists of three steps. In the first step, the process of converting the Digital Number (DN) unit image into top-of-atmosphere reflectance units was performed. In the second step, preprocessing such as Hue-Value-Saturation (HSV) transformation, triangle thresholding, and maximum likelihood classification was applied using the top of the atmosphere reflectance image, and the threshold for generating the initial cloud mask was determined for each image. In the third post-processing step, the noise included in the initial cloud mask created was removed and the cloud boundaries and interior were improved. As experimental data for cloud detection, CAS500-1 L2G images acquired in the Korean Peninsula from April to November, which show the diversity of spatial and seasonal distribution of clouds, were used. To verify the performance of the proposed method, the results generated by a simple thresholding method were compared. As a result of the experiment, compared to the existing method, the proposed method was able to detect clouds more accurately by considering the radiometric characteristics of each image through the preprocessing process. In addition, the results showed that the influence of bright objects (panel roofs, concrete roads, sand, etc.) other than cloud objects was minimized. The proposed method showed more than 30% improved results(F1-score) compared to the existing method but showed limitations in certain images containing snow.

• Journal of Korean Home Economics Education Association
• /
• v.21 no.3
• /
• pp.1-28
• /
• 2009

The purpose of this research was to provide the information needed for improving the elderly housing education and the elderly housing contents of Technology and Home Economics textbook. Thus, the elderly housing contents of current Technology and Home Economics textbook were categorized. Then, a total of 233 teachers were surveyed to examine their importance perception on the elderly housing contents. Elderly housing contents were grouped into S categories, each of which was named 'safety and safety management', 'room plan for the elderly', 'shrinking stage in family life cycle and dependency stage in housing life cycle','a house for 3-generation extended family', and 'universal design'. Teachers' importance perception was generally high for 'safety and safety management' and especially for 'safety and safety management' of bathroom(protection against slippery floor, safety bar, the appropriate position and height of shower, bathtub, and wash stand) ; the basic guidelines of 'room plan for the elderly'(emergency call, closely located bathroom, flat and non-slippery floor) ; the general guidelines during shrinking stage in family life cycle and dependency stage in housing life cycle'(protection equipments against safety accident, emergency call, flat and non-slippery floor) ; independent life among 3-generation extended family members(bathroom for the elderly, space plan for independent life among extended family members) ; the basic design guidelines of universal design(safety bar in bathroom, flat floor) and the guidelines of universal design which were especially helpful for wheelchair users(enough empty space in front of door and in corridor, wide door and corridor). Recommendations for the elderly housing education and the elderly housing contents of Technology and Home Economics textbook were that 'emergency call','safety bar in bathroom' and 'flat and non-slippery floor' were the most basic guidelines for elderly housing; that 'enough empty space in front of door and in corridor', 'wide door and corridor', 'low and wide steps', 'ramp for wheelchair users' and 'D-type or lever-type door handle' were most recommendable guidelines for universal design; that 'need for elderly housing', 'types of elderly housing', 'alternatives and choices of dependency stage in housing life cycle' and 'house plans for shrinking stage in family life cycle' were required guidelines for increasing elderly-only family.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.3
• /
• pp.1-13
• /
• 2018

Landscape Architecture is a minority manpower field that requires wide knowledge and experience. Therefore, the service market is narrower than other fields, and education service for practitioners is lacking. The purpose of this study is to propose e-learning content development methodology that can provide customized landscaping practical education according to the level of education and increase the economic efficiency of the development process. First, in theoretical review, the ADDIE model was modified to select the curriculum development model that pursues efficiency and introduced the concept of reusing learning objects in the SCORM-based model. In particular, to overcome the problems presented in the precious studies, the analysis and design stages have been strengthened and faculty designers with integrated knowledge of Landscape Architecture and ICT have led the overall phase. The actual development process is based on a step by step procedure--analysis of landscaping practitioners needs and environments, etc., teaching and learning procedures and the design of activities considering contents reuse, the first development such as actual shooting and editing, and the second development reusing the first development content--and was done in the order of evaluation and revision of professionalism and satisfaction. As a result of the study, the space-based courses composed of modular learning objects were first developed as 216 courses in 8 subjects, as 208 courses in 3 subjects in total, in which the modularized learning object are crossed and combined in units and difficulty-based courses were second developed in 216 courses with 3 subjects in total. As a result of the evaluation the satisfaction assessment of the overall satisfaction was 4.20 and the average value of the eight measures was 3.97, both being close to 4.0. For the professional assessment, the scores of 8 subjects were very high at 84.8 to 96.4 points. in context, the scores of 5 subjects were equal to from 89.9 to 96.4 points. In conclusion, as the study was conducted based on a clear understanding of the digital characteristics of e-learning contents and general characteristic of the landscaping industry, it was possible to develop a curriculum by developing a course composed of modular learning objects and reusing learning objects by unit. In particular, it has been proven to be effective in conveying professional knowledge and experiences via general procedures and provided an opportunity to overcome some analog problems that may occur in offline education. In the future, further studies need to be done by expanding the content and by focusing on segmented subjects.

• Tunnel and Underground Space
• /
• v.18 no.6
• /
• pp.491-502
• /
• 2008

A certain range of the original ground around the tunnel should be preserved to ensure structural safety of the tunnel when other structures are made around the tunnel, and thus this range is defined as safety zone of the tunnel. The main points to ensure the stability of an existing tunnel when constructing a new tunnel in an inter-crossing area are distance between two tunnels, size of the new tunnel, excavation method for the new tunnel, ground condition around the tunnel, and lining type of the existing tunnel etc. When the new tunnel is excavated above the existing tunnel, the existing tunnel is likely to suffer deformation at a crown zone, damage of arching effect, and live load of the new tunnel etc. On the other hand, when the new tunnel is excavated below the existing tunnel, the existing tunnel is likely to be damaged due to settlement. This study has been made on the behavior of the existing tunnel by means of model test and numerical analysis when the new tunnel is excavated below the existing tunnel. Safety zone of the tunnel was estimated by the results of strength/stress ratio obtained from numerical analysis, and the movement of ground was estimated by the model test. The results of earth pressure, ground displacements, and convergence of the tunnel obtained from model test were compared with those of numerical analysis, and show a similar trend.

• Journal of KIISE:Databases
• /
• v.30 no.5
• /
• pp.507-520
• /
• 2003

In this paper, an automatic construction method of theme melody index for large music database and an associative content-based music retrieval mechanism in which the constructed theme melody index is mainly used to improve the users' response time are proposed. First, the system automatically extracted the theme melody from a music file by the graphical clustering algorithm based on the similarities between motifs of the music. To place an extracted theme melody into the metric space of M-tree, we chose the average length variation and the average pitch variation of the theme melody as the major features. Moreover, we added the pitch signature and length signature which summarize the pitch variation pattern and the length variation pattern of a theme melody, respectively, to increase the precision of retrieval results. We also proposed the associative content-based music retrieval mechanism in which the k-nearest neighborhood searching and the range searching algorithms of M-tree are used to select the similar melodies to user's query melody from the theme melody index. To improve the users' satisfaction, the proposed retrieval mechanism includes ranking and user's relevance feedback functions. Also, we implemented the proposed mechanisms as the essential components of content-based music retrieval systems to verify the usefulness.

• Journal of Cadastre & Land InformatiX
• /
• v.52 no.2
• /
• pp.53-65
• /
• 2022

According to the advancement of the GNSS satellite positioning system, the module of hardware and operation software reflecting accuracy and economical efficiency is implemented in the user sector including the multi-channel GNSS receiver, the multi-frequency external antenna and the mobile app (App) base public positioning analysis software etc., and the multichannel GNSS RTK positioning of the active configuration method (DIY, Do it yourself) is possible according to the purpose of user. Especially, as the infrastructure of multi-GNSS satellite is expanded and the potential of expansion of utilization according to various modules is highlighted, interest in the utilization of multi-channel low-cost GNSS receiver module is gradually increasing. The purpose of this study is to review the multi-channel low-cost GNSS receivers that are appearing in the mass market in various forms and to analyze the utilization plan of the "address information facility investigation project" of the Ministry of Public Administration and Security by constructing the multi-channel low-cost GNSS positioning module based RTK survey system (hereinafter referred to as "multi-channel GNSS RTK module positioning system"). For this purpose, we constructed a low-cost "multi-channel GNSS RTK module positioning system" by combining related modules such as U-blox's F9P chipset, antenna, Ntrip transmission of GNSS observation data and RTK positioning analysis app through smartphone. Kinematic positioning was performed for circular trajectories, and static positioning was performed for address information facilities. The results of comparative analysis with the Static positioning performance of the geodetic receivers were obtained with 5 fixed points in the experimental site, and the good static surveying performance was obtained with the standard deviation of average ±1.2cm. In addition, the results of the test point for the outline of the circular structure in the orthogonal image composed of the drone image analysis and the Kinematic positioning trajectory of the low cost RTK GNSS receiver showed that the trajectory was very close to the standard deviation of average ±2.5cm. Especially, as a result of applying it to address information facilities, it was possible to verify the utility of spatial information construction at low cost compared to expensive commercial geodetic receivers, so it is expected that various utilization of "multi-channel GNSS RTK module positioning system"

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.1
• /
• pp.70-79
• /
• 2014

Following the technology developments of traffic network and communication for the wide area, the importance of the cooperation system to vitalize the wide area economy is increasing. Therefore, in this study, DongNam Kwon industry information system is established for the industrial information sharing based on GIS in the DongNam Kwon wide area economy. The DongNam Kwon is an industrial integration area centered with the manufacturing so that the operation of effective industrial cluster and cooperation systems are required across the administrational boundaries. To establish the database of the information, the information system was established utilizing already established industrial databases in Busan, Ulsan and Gyeongnam. But, various issues caused by the discordances among the data of each local government and the insufficiency of GIS based location information have been found. According to the analysis, the standardization considering the courses of collection, distributions and utilization are required immediately to solve the issues. This study establishes an 2-way industrial information system enabling the information creation and the phased approach between the administrator and the user in the bi-directions on the web by utilizing cadastral and numerical maps. The result of this study would have a meaning in providing a fundamental frame for cooperative responses and cooperation system for DongNam Kwon's industrial promotion using industrial information sharing.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.1
• /
• pp.19-29
• /
• 2000

Because the previous simulation tool for attitude control of satellite was designed for the modeling of rigid body and PD controller, the attitude error can be made more than the limitation value for keeping for communication link, and then the communication link can be lost at moving of satellite. So, for rapid attitude restoration and design of stable and modernized controller, the modelling of rigid body and flexible body structure for moving GEO and LEO satellites were performed. Also the minimum time controller is designed for the rapid restoration of attitude error at communication broken and to minimize the disconnection period from ground communication system during the satellite stationkeeping. The linear regulator is designed using the space state vector that is better than accuracy and stability of PD controller. Firstly the simulation was performed for comparison of the rigid and stability of PD controller. Firstly the simulation was performed for comparison of the rigid and flexible models using PD controller and the case of the pitch angle changing by ground command, and the case of the periodic north-south stationkeeping are performed for the analysis of response characteristics of each controller when the attitude is changed. As a result, the flexible body model represents more sililar results of real situation than the rigid body model. The minimum time controller can restore 7 times rapidly than PD controller for its lost attitude. The linear regulator has several merits for capability of adaptation against the external disturbance, stability and response time. In future, we can check the estimated results using this satellite model and controller for real operation. Futhermore the development of new controller and training can be supported.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.8
• /
• pp.694-700
• /
• 2009

In this paper, we propose a RFID tag antenna with low performance degradation due to nearby dielectric materials. The proposed antenna is designed to be appropriate for ink printing fabrication. The antenna is designed to operate in UHF band of $860{\sim}960$ MHz. The antenna uses a T-matching network in the middle of the main body and two parasitic patches in vicinity for complex conjugate matching with a commercial tag chip. In addition, the two parasitic patches induce currents at different dielectric constants of nearby dielectric materials. This can minimize the performance degradation due to nearby dielectric materials. The measured results show the half power matching bandwidth from 844 MHT to 1,268 MHz. It exhibits the reading distance of about 3.5 m in free space when the tag antenna is used with the commercial reader antenna (transmitting power of 20 dBm and the reader antenna gain of 6 dBi). When the tag is attached on dielectric materials of wood and FR4, the resulting reading distances are 2.61 m and 2.51 m, respectively.