• Journal of the Korean Society of Radiology
• /
• v.79 no.5
• /
• pp.254-258
• /
• 2018

Purpose: Establishment of an appropriate protocol for breast magnetic resonance imaging (MRI) in the study of image quality standards to enhance the effectiveness of medical image information exchange, which is part of the construction and activation of clinical information exchange for healthcare informatization. Materials and Methods: The recommended protocols of breast and MRI scans were reviewed and the questionnaire was prepared by a responsible researcher. Then, a panel of 9 breast dedicated radiologists was set up in Korea. The expert panel conducted a total of three Delphi agreements to draw up a consensus on the breast MRI protocol. Results: The agreed breast MRI recommendation protocol is a 1.5 Tesla or higher device that acquires images with prone position using a breast dedicated coil and includes T2-weighted and pre-contrast T1-weighted images. Contrast enhancement images are acquired at least two times, and include 60-120 seconds between images and after 4 minutes. The contrast enhancement T1-weighted image should be less than 3 mm in thickness, less than 120 seconds in temporal resolution, and less than $1.5mm^2$ in-plane pixel resolution. Conclusion: The Delphi agreement of the domestic breast imaging specialist group has established the recommendation protocol of the effective breast MRI.

• Journal of the Society of Disaster Information
• /
• v.17 no.3
• /
• pp.640-654
• /
• 2021

Purpose: Normal education operation was difficult in the national disaster situation of Coronavirus Infection-19. Non-face-to-face education can be an alternative to face to face education, but it is not easy to provide the same level of education. In this study, the professor of disaster management field will identify problems that can occur in the overall operation and progress of non-face-to-face education and seek ways to improve non-face-to-face education. Method: Non-face-to-face real-time education was largely categorized into pre-class, in-class, post-class, and evaluation, and case studies were conducted through the professor's case studies. Result&Conclusion: The results of the survey are as follows: First, pre-class, it was worth considering providing a non-face-to-face educational place for professors, and the need for prior education on non-face-to-face educational equipment and systems was required. In addition, it seems necessary to make sure that education is operated smoothly by giving enough notice on classes and to make efforts to develop non-face-to-face education programs for practical class. Second, communication between professor and learner, and among learners can be an important factor in non-face-to-face mid classes. To this end, it is necessary to actively utilize debate-type classes to lead learners to participate in education and enhance the educational effect through constant interaction. Third, non-face-to-face post classes, policies on the protection of privacy due to video records should be prepared to protect the privacy of professors in advance, and copyright infringement on educational materials should also be considered. In addition, it is necessary to devise various methods for fair and objective evaluation. According to the results of the interview, in the contents, which are components of non-face-to-face education, non-face-to-face education requires detailed plans on the number of students, contents, and curriculum suitable for non-face-to-face education from the design of the education. In the system, it is necessary to give the professor enough time to fully learn and familiarize with the function of the program through pre-education on the program before the professor gives non-face-to-face classes, and to operate the helpdesk, which can thoroughly check the pre-examination before non-face-to-face education and quickly resolve the problem in case of a problem.

• Journal of Korea Water Resources Association
• /
• v.52 no.10
• /
• pp.743-752
• /
• 2019

The flow in the meandering channel is characterized by the spiral motion of secondary currents that typically cause the erosion along the outer bank. Hydraulic structures, such as spur dike and groyne, are commonly installed on the channel bottom near the outer bank to mitigate the strength of secondary currents. This study is to investigate the effects of submerged vanes installed in a $90^{\circ}$ meandering channel on the development of secondary currents through three-dimensional numerical modeling using the hybrid RANS/LES method for turbulence and the volume of fluid method, based on OpenFOAM open source toolbox, for capturing the free surface at the Froude number of 0.43. We employ the second-order-accurate finite volume methods in the space and time for the numerical modeling and compare numerical results with experimental measurements for evaluating the numerical predictions. Numerical results show that the present simulations well reproduce the experimental measurements, in terms of the time-averaged streamwise velocity and secondary velocity vector fields in the bend with submerged vanes. The computed flow fields reveal that the streamwise velocity near the bed along the outer bank at the end section of bend dramatically decrease by one third of mean velocity after the installation of vanes, which support that submerged vanes mitigate the strength of primary secondary flow and are helpful for the channel stability along the outer bank. The flow between the top of vanes and the free surface accelerates and the maximum velocity of free surface flow near the flow impingement along the outer bank increases about 20% due to the installation of submerged vanes. Numerical solutions show the formations of the horseshoe vortices at the front of vanes and the lee wakes behind the vanes, which are responsible for strong local scour around vanes. Additional study on the shapes and arrangement of vanes is required for mitigate the local scour.

• Journal of the Korean Electrochemical Society
• /
• v.24 no.3
• /
• pp.65-75
• /
• 2021

Coin cell is a basic testing platform for battery research, discovering new materials and concepts, and contributing to fundamental research on next-generation batteries. Li metal batteries (LMBs) are promising since a high energy density (~500 Wh kg^-1) is deliverable far beyond Li-ion. However, Li dendrite-triggered volume fluctuation and high surface cause severe deterioration of performance. Given that such drawbacks are strongly dependent on the cell parameters and structure, such as the amount of electrolyte, Li thickness, and internal pressure, reliable Li metal coin cell testing is challenging. For the LMB-specialized coin cell testing platform, this study suggests the optimal coin cell structure that secures performance and reproducibility of LMBs under stringent conditions, such as lean electrolyte, high mass loading of NMC cathode, and thinner Li use. By controlling the cathode/anode (C/A) area ratio closer to 1.0, the inactive space was minimized, mitigating the cell degradation. The quantification and imaging of inner cell pressure elucidated that the uniformity of the pressure is a crucial matter to improving performance reliability. The LMB coin cells exhibit better cycling retention and reproducibility under higher (0.6 MPa → 2.13 MPa) and uniform (standard deviation: 0.43 → 0.16) stack pressure through the changes in internal parts and introducing a flexible polymer (PDMS) film.

• (The)Study of the Eastern Classic
• /
• no.67
• /
• pp.379-418
• /
• 2017

Weoldae -which we can find inside Joseon palaces- is usually erected in front of important structures including the Main Hall(Jeongjeon, 正殿). There is no clear definition of its nature that we can find in official law codes or dynastic ritual manuals, and such records do not specify what kind of rules should be observed in creating them either. In illustrations of palaces such as and , Weoldae can be seen at structures such as the Main "Jeongjeon" Hall(正殿), Royal office(Pyeonjeon, 便殿), Royal Quarters(Jeongchim, 正寢), Queen's bedroom(Chimjeon, 寢殿), Quarters of the Crown Prince(Dong'gung, 東宮), and other structures. All these structures equipped with a Weoldae were related to special figures inside the royal family such as the king, the queen, the crown prince, and the crown-prince' son. These figures were literally above the law, and as such their treatment could not be defined by law. And these spaces were where they worked or rested while they lived, and where their posthumous tablets(Shinju, 神主) or portraits(Eojin, 御眞) were enshrined after they died. (When such spaces were used for latter purposes, they were designated either as 'Honjeon[魂殿, chamber of the tablet]' or 'Jinjeon[眞殿, hall of portrait']). Joseon was a Confucian dynasty with a strict social stratification system, and the palace structures reflected such atmosphere as well. We can see that structures described with Weoldae in and were structures which were more important than others that did not have a Weoldae. Among structures with Weoldae, the place which hosted most of the dynastic rituals was the Main Hall. In this Main Hall, the King swore an oath himself, passed the incense(香) himself during memorial services, and observed honoring ceremonies[Manbae-rye(望拜禮)] at the "Hwangdan"(皇壇) altar which was built to commemorate the three Ming Emperors. The so-called "Two Palaces[兩闕]" of Joseon shared a unique relationship in terms of their own Weoldae units and the rituals that were held there. In the early half of the Joseon dynasty period, Gyeongbok-gung(景福宮) and Dong'gweol(東闕) constituted the "Two palaces," but after the war with the Japanese in the 1590s during which the Gyeongbok-gung palace was incinerated, Dong'gweol and Seogweol(西闕) came to newly form the "Two palaces" instead. Meanwhile, Changdeok-gung(昌德宮) became the main palace[法宮], replacing the previous one which had been Gyeongbok-gung. In general, when a king moved to another palace, the ancestral tablets in the Honjeon chamber or the portrait in the Jinjeon hall would accompany him as well. Their presence would be established within the new palace. But king Yeongjo was an exception from that practice. Even after he moved to the Gyeong'hi-gung(慶熙宮) palace, he continued to pay visit to the Jinjeon Hall at Changdeok-gung. While he was positioned inside Gyeong'hi-gung, he did not manage the palace with Gyeonghi-gung as its sole center. He tried to manage other palaces like Changdeok-gung and Chang'gyeong-gung(昌慶宮) as well, and as organically as possible.

• Journal of Mushroom
• /
• v.18 no.4
• /
• pp.317-322
• /
• 2020

This experiment was conducted to solve the failure of fruiting body production in the bottle cultivation of the oyster mushroom cultivar 'Heuktari'. The effects of incubation temperature on primordium formation and fruiting body yield of the oyster mushroom cultivar 'Heuktari' were investigated. The proper temperature for mycelium growth of 'Heuktari' on potato dextrose agar (PDA) medium is 23-26℃. The mycelial growth of 'Heuktari' was faster than that of Chunchu 2ho. During mycelial culture in sawdust medium, the temperature of the medium in the bottle initially increased, reached the highest point in the middle of the culture, and then decreased. The higher the set temperature, the shorter the incubation period. When the incubation temperatures were 20℃ and 24℃, respectively, the undeveloped primordium formation rates were low (1.8% and 4.2%, respectively). However, the rate of undeveloped primordium formation increased, and the yield decreased at incubation temperatures of 16℃ and 28℃. Mushroom farms that set incubation temperatures to 18℃ and maintained the medium temperature at less than 28℃ showed undeveloped primordium formation rates ranging between 0.3-0.8%. The rate of undeveloped primordium formation increased and the yield decreased in the farms with high incubation temperatures (above 28℃). We found that in order to reduce undeveloped primordium formation, the air inside the incubation room should be circulated continuously so that the temperature of the medium does not rise above 28℃, and dense incubation conditions should be avoided.

• Ecology and Resilient Infrastructure
• /
• v.8 no.1
• /
• pp.64-78
• /
• 2021

This study was conducted to find out the effect of the construction and operation of river-crossing structures on the habitat landscape characteristics in the Geum-gang River, South Korea. A total of three study reaches were selected in the downstream of the Daecheong Dam: the Buyong-ri reach, which is a control that is not affected by the construction and operation of the weir of the Four Rivers Project and Sejong-bo Weir reach and Gongju-bo Weir reach of the upper and lower sections of each weir that are affected by the weir construction and operation. The habitat type was classified, and then the structural characteristics of the landscape were analyzed using aerial photographs taken before and after the construction of the Daecheong Dam, before and after the construction of the weir, and before and after the weir gate operation. After the construction of Daecheong Dam in Geum River, the area of the bare land greatly decreased, and the area of grassland and woodland increased in the downstream of the dam. In addition, the patch number in the river landscape increased, the patch size decreased, and the landscape shape index and the habitat diversity increased. Therefore, after the construction of the dam, the bare land habitat was changed to a vegetated habitat, and the habitat was fragmented and diversified in the downstream of the dam. After the construction of the weirs, the area of open water increased by 18% in the Sejong-bo reach and by 90% in the Gongju-bo reach, and the landscape shape index of the open water decreased by 32% in the Sejong-bo reach and by 35% in the Gongju-bo reach, and the habitat diversity index decreased to 25% in the Sejong-bo reach and to 24% in the Gongju-bo reach. Therefore, the open water habitat was expanded, the shape of the habitat was simplified, and the habitat diversity decreased according to the construction of the weirs. After water-gate opening of the weir, the bare land that disappeared after the construction of the weir reappeared, and the landscape shape index and habitat diversity index increased in both terrestrial and open water habitats. Therefore, it was found that the landscape characteristics of the river habitats were restored to the pre-construction of the weir by the operation of the weir gate. The effect of weir gate opening was delayed in the downstream than in the upstream of the weir. Although the characteristics of the landscape structure in the river habitat changed due to the construction of the river-crossing structures, it is thought that proper technology development for the ecological operation of the structures is necessary as the habitat environments can be restored by the operation of these structures.

• Journal of Nutrition and Health
• /
• v.54 no.4
• /
• pp.383-397
• /
• 2021

Purpose: The purpose of this study was to evaluate the change in the use of home meal replacement (HMR) and delivered foods and food habits of college students due to coronavirus disease 2019 (COVID-19). Methods: A survey was conducted on 460 male and female college students in Chungcheong province in December 2020. Results: The methods of participation in classes in the 2nd semester of 2020 were 40.2% for '100% non-face-to-face' and 40.4% for 'more than 70.0% of non-face-to-face classes'. 52.8% of the subjects responded that their physical activity had decreased, while 36.1% of the subjects responded that their body weight had increased over the past 6 months. Regarding the use of HMR, 62.7% of the male students and 69.6% of the female students responded with '1-2 times a week or less' before the outbreak of COVID-19. After the outbreak, 57.4% of males and 46.7% of females responded with '3-4 times a week or more' (p < 0.05, p < 0.001). As for the use of delivered food, 58.3% of the females responded with '2-3 times a month or less' before the outbreak, whereas the rate of responding with '1 or more times a week' after the outbreak was 64.6% (p < 0.001). Negative changes in food habits caused by COVID-19 were in the order of irregular meals (56.7%), increased intake of delivered food (42.2%), increased intake of snacks (33.3%), and increased intake of processed foods such as HMR (30.4%). Conclusion: As mentioned above, many college students had non-face-to-face classes due to COVID-19. During this period, they experienced decreased physical activity, weight gain, and undesirable eating habits such as irregular meal time, and increased intake of processed foods, delivery foods, and snacks. Therefore, there is a high need for nutrition education and policy support for the prevention and management of health and nutrition problems of college students, which can be caused due to the COVID-19 pandemic.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.4
• /
• pp.527-536
• /
• 2022

The purpose of this study is to predict changing traffic environments and related economic effects by reflecting the changed KTDB and socio-economic indicators pertaining to Mulgeum station, a general railway stop, when it is confirmed as a KTX stop. To analyze the data of this study, socioeconomic indicators and the general status of transportation facility operations were investigated with reference to related statistical data, centered on the country overall and on Yangsan city in particular. In addition, we investigated and referenced the railroad facility construction plan and train operation plan, which are national high-level plans related to land development and transportation network construction. Currently, there are only ITX trains (4 times/day) and Mugunghwa trains (29 times/day) that stop at Mulgeum station in Yangsan, meaning that passengers cannot use KTX trains in the Yangsan area. In particular, the need for a KTX stop at Mulgeum station has been continuously raised because train users in the Yangsan area have inconvenient transportation in that they must travel 40 minutes to Ulsan station or 30 minutes to Gupo station to use the KTX. As a result of analyzing railroad transportation demand that will change in the future as the KTX stop at Mulgeum station is confirmed, the number of passengers boarding and arriving at Mulgeum station is predicted to be 1,674 passengers/day by 2025. In addition, the numbers of train passengers that are converted from Ulsan and Gupo stations due to the stop at Mulgeum station are predicted to be 594 passengers/day boarding and 562 passengers/day arriving by 2025. In the future, if Yangsan citizens use the KTX Mulgeum station, the access time to Mulgeum station can be shortened to 22 minutes from 65 minutes, and it is predicted that the inconvenience of transferring between railroads will be resolved, with the waiting time for transfers reduced by up to a maximum of 40 minutes. Therefore, the economic effect of creating a KTX stop at Mulgeum station was analyzed to be B/C=1.823 when general railroad operating costs are not taken into account and B/C=2.127 when general railroad operating costs are considered. In conclusion, when using KTX trains to visit the Seoul Metropolitan Area, it takes 2 hours and 43 minutes to use Mulgeum station without using Ulsan station or Gupo station, which is considered to be very effective for reducing travel times and improving the economic feasibility of this development; it is also expected that Yangsan city will be able to improve accessibility and mobility to the Seoul Metropolitan Area by breaking free from the disgrace of being a remote location given its link to KTX in the future.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.1
• /
• pp.175-198
• /
• 2022

With the development of technology, the methods of digitally converting various forms of analog information have become common. As a result, the concept of recording, building, and reproducing data in a virtual space, such as digital heritage and digital reconstruction, has been actively used in the preservation and research of various cultural heritages. However, there are few existing research results that suggest optimal scanners for small and medium-sized relics. In addition, scanner prices are not cheap for researchers to use, so there are not many related studies. The 3D scanner specifications have a great influence on the quality of the 3D model. In particular, since the state of light reflected on the surface of the object varies depending on the type of light source used in the scanner, using a scanner suitable for the characteristics of the object is the way to increase the efficiency of the work. Therefore, this paper conducted a study on nine small and medium-sized buried cultural properties of various materials, including earthenware and porcelain, by period, to examine the differences in quality of the four types of 3D scanners. As a result of the study, optical scanners and small and medium-sized object scanners were the most suitable digital records of the small and medium-sized relics. Optical scanners are excellent in both mesh and texture but have the disadvantage of being very expensive and not portable. The handheld method had the advantage of excellent portability and speed. When considering the results compared to the price, the small and medium-sized object scanner was the best. It was the photo room measurement that was able to obtain the 3D model at the lowest cost. 3D scanning technology can be largely used to produce digital drawings of relics, restore and duplicate cultural properties, and build databases. This study is meaningful in that it contributed to the use of scanners most suitable for buried cultural properties by material and period for the active use of 3D scanning technology in cultural heritage.