• Applied Chemistry for Engineering
• /
• v.29 no.1
• /
• pp.18-21
• /
• 2018

We report on the simple preparation method of large-scale structured catalysts by temperature-regulated chemical vapor deposition with a high cell-density ceramic honeycomb monolith. And the feasibility for dry reforming of methane catalysts was evaluated. The NiO/Cordierite (CDR) catalyst was prepared by controlling coating conditions at each temperature step, leading to a conformal deposition of NiO inside the cordierite honeycomb monolith with the cell density of 600 cpsi. The catalytic conversion of $CH_4$ and $CO_2$ for dry reforming of methane were about 83% and 90% with gas hourly space velocity of $10,000h^{-1}$ at $800^{\circ}C$, respectively. As a result, it exhibited that the temperature-regulated chemical vapor deposition method can be expedient for the preparation of large-scale structured catalysts.

• Korean Journal of Optics and Photonics
• /
• v.12 no.1
• /
• pp.61-66
• /
• 2001

Defocused Fourier plane holograms are stored in disk-type holographic memories where thin recording media are used, the areal storage density per hologram and the intensity uniformity of the signal beam at the recording plane are studied. As the pixel pitch of the spatial light modulator that represents binary data increases, the storage density per hologram increases if exact Fourier holograms are stored. When defocused Fourier plane holograms are stored, however, we show that there exists an optimal pixel pitch that maximizes the area storage density per hologram in general, to increase the areal storage density per hologram, f/# of the Fourier transform lens that focuses the data image should be as small as possible. In this case, not only the intensity distribution at the recording plane but also the recording area becomes very sensitive to the degree of defocusing. Therefore, even if the exact Fourier plane holograms are stored, the defocusing effect owing to the medium thickness should be taken into account to achieve the maximal areal storage density per hologram.logram.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.10
• /
• pp.3-9
• /
• 2016

Current mobile communication systems utilize the multiple-input multiple-output (MIMO) transmission technique as an important means to enhance the bandwidth efficiency. Accurate beamforming via channel estimation contributes to the signal-to-interference-plus-noise ratio (SINR) increase and the system performance improvement when MIMO transmission techniques are employed. Therefore, determination of beamforming vectors as well as the design of appropriate codebooks defining these codevectors play an important role in system operation. In this paper, we statistically analyze the phase difference between the channels corresponding to adjacent antenna elements in order to design an efficient codebook for uniform circular arrays (UCAs). We introduce new parameters which compensate for the additional phase difference observed in its probability density functions (PDFs). The performance of the proposed codebook is tested using the spatial channel model (SCM) to demonstrate its gain over the standard codebooks adopted in the long term evolution (LTE) Releases 8 and 10.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.3
• /
• pp.115-126
• /
• 1990

In the past, seawall and sea dike very higher than sea-water elevation had been constructed mainly to prevent the wave overtopping volume. However, the coastal zone is recently developed for the multipurpose of not only preventing from the coastal disaster but conserving the coastal environment and utilizing the coastal space. In this sense, this paper deals with the artificial reef being able to reduce the overtopping volume. Relations of the overtopping volume to the breaking wave are briefly reviewed theoretically, and fundamental factor affecting it are also obtained experimentally form the artificial reef with the irregular waves, In addition, the numerical simulation is developed to investigate the effects of spectral band width for the overtopping volume. The most effective artificial reef section to reduce the overtopping volume is proposed.

• Journal of KIISE
• /
• v.45 no.3
• /
• pp.294-302
• /
• 2018

With the emergence of the new service industry due to the development of information and communication technology, cyber space risks such as personal information infringement and industrial confidentiality leakage have diversified, and the security problem has emerged as a critical issue. In this paper, we propose a behavior-based anomaly detection method that is suitable for real-time and large-volume data analysis technology. We show that the proposed detection method is superior to existing signature security countermeasures that are based on large-capacity user log data according to in-company personal information abuse and internal information leakage. As the proposed behavior-based anomaly detection method requires a technique for processing large amounts of data, a real-time search engine is used, called Elasticsearch, which is based on an inverted index. In addition, statistical based frequency analysis and preprocessing were performed for data analysis, and the DBSCAN algorithm, which is a density based clustering method, was applied to classify abnormal data with an example for easy analysis through visualization. Unlike the existing anomaly detection system, the proposed behavior-based anomaly detection technique is promising as it enables anomaly detection analysis without the need to set the threshold value separately, and was proposed from a statistical perspective.

• The Journal of the Korea Contents Association
• /
• v.11 no.11
• /
• pp.79-90
• /
• 2011

The purpose of this study is to explore physical factor of digital text structure for designing e-Book interface and to develop prototype of e-Book interface by applied these factors. To address this goal, explore factor analysis and confirmatory factor analysis were employed, 237 university students were the participated in this study. According to a result, 29 items for physical feature of digital text structure were developed, 9 factors of digital text structure were also extracted; volume, depth, density, space, layout, format, signal, size, and length. Besides, to identify structure of pre-defined 9 factors, confirmatory factor analysis was conducted. As a result of CFA, the factor structure was supported by all of model fit indices.

• Tunnel and Underground Space
• /
• v.25 no.6
• /
• pp.527-533
• /
• 2015

This study performed an on-site demonstration of the topographic surveying technique at a large-scale open-pit limestone mine in Korea using a fixed-wing unmanned aerial vehicle (UAV, Drone, SenseFly eBee). 288 sheets of aerial photos were taken by an automatic flight for 30 minutes under conditions of 300 m altitude and 12 m/s speed. Except for 37 aerial photos in which no keypoint was detected, 251 aerial photos were utilized for data processing including correction and matching, then an orthomosaic image and digital surface model with 7 cm grid spacing could be generated. A comparison of the X, Y, Z-coordinates of 4 ground control points measured by differential global positioning system and those determined by fixed-wing UAV photogrammetry revealed that the root mean squared errors were around 15 cm. Because the fixed-wing UAV has relatively longer flight time and larger coverage area than rotary-wing UAVs, it can be effectively utilized in large-scale open-pit mines as a topographic surveying tool.

• Fire Science and Engineering
• /
• v.19 no.1 s.57
• /
• pp.70-89
• /
• 2005

Fire scenarios in a space $20.0m\;\times\;4.0m$ floor and 3.0m high were simulated by using computational fluid dynamics program (FDS 4.0.3) to investigate the effect of the combined operation of both sprinkler and vent systems, which are installed for cooling and blocking smoke which propagates beneath the ceiling of a horizontal corridor, on the temperature and smoke density of it. It was shown that the combined operation both sprinkler and vent systems was more effective than each operation for cooling and blocking smoke, the number of operating sprinklers was two because of corner effect of wall, and over-installed sprinklers deteriorated the effect of cooling and blocking smoke. This study showed that the case of two sprinklers and vent flow rate $3.0m^3/s$ in fire scenario was the most effective for cooling and blocking smoke. It was confirmed that the smoke downdrag occurs in operating sprinkler system, and the more smoke droplets produced by increasing fire size, the greater smoke downdrag occurred.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.297-297
• /
• 2012

양자점은 공간적으로 세 방향 모두 전하의 운동을 제한하는 0차원 구조로 불연속적인 상태 밀도를 가진다. 이런 양자점의 특성은 광통신용 소자, 레이저 다이오드 등과 같은 광학 및 전자 장치에 응용될 수 있기 때문에 많은 주목을 받아 활발히 연구되어 왔다. 본 연구에서는 MBE 장비를 이용하여 GaAs 기판위에 InAs 양자점을 성장시키는 동안 As의 공급을 임의로 차단시켜 양자점 형성 조건을 변화시킨 시료들의 광학적 특성을 Photoluminescence (PL) 와 Time-resolved PL (TRPL) 실험을 이용하여 분석하였다. GaAs (001) 기판 위에 GaAs buffer layer를 $610^{\circ}C$에서 성장한 후, $470^{\circ}C$에서 As 공급 조건 변화에 따른 InAs 양자점을 성장하였다. 양자점을 성장한 후 GaAs cap layer를 $610^{\circ}C$에서 성장하였다. InAs 양자점 시료들은 In을 20초 공급하는 동안 As의 공급과 차단을 각각 1초, 2초, 3초의 일정한 간격으로 반복하였다. 10 K에서 각각의 시료들의 PL을 측정한 결과 As 공급과 차단을 2초씩 반복한 T2시료에서 PL 세기가 가장 좋게 나타났으며, 3초씩 반복한 T3시료에서 가장 나쁘게 나타났다. PL 피크는 공급과 차단을 1초씩 반복한 T1 시료가 1.23 eV, T2 시료가 1.24 eV, T3 시료가 1.26 eV에 나타났으며, As의 차단시간이 증가함에 따라 PL 피크가 높은 에너지로 이동함을 보였다. 발광파장에 따른 PL 소멸은 파장이 증가함에 따라 점차 느려지다가 PL 피크 근처에서 가장 느린 소멸곡선을 보이고, 파장이 더 증가하였을 때 점차 빠르게 소멸하였다. As 공급 조건의 변화에 따라 InAs 양자점의 크기와 밀도, 모양 등이 변하는 것을 Atomic Force Microscope (AFM) image를 통하여 확인하였으며, PL과 TRPL을 이용하여 InAs 양자점의 광학적 특성을 분석하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.3
• /
• pp.48-54
• /
• 2015

In this study, we propose an innovative lateral force distribution building system between tall buildings by utilizing the difference of moment of inertia, resulting the reduction of lateral displacement and the lateral forces in terms of an alternative for the dense human and increased cost of lands in highly integrated city area. A successive collapse prevention means by providing additional bearing plate between connections is proposed. In addition to that, a more economical vibration reduction is expected due to the suggested tuned mass damper on the surface of spacial structure. In the considered verification examples, reduced drifts at the top location of the building systems are validated against static wind pressure loads and static earthquake loads. The suggested hybrid building system will improve the safety and reliability of the new or existing building system in terms of more than 30% reduced drift and vibration through the development of convergence of tall buildings and spatial structures.