• Spatial Information Research
• /
• v.18 no.4
• /
• pp.43-53
• /
• 2010

A dam is effective in stable supply of water required in daily life and reduction of damage from floods. hut a lot of land or houses arc submerged due to the construction of a darn heavily affecting environment in surrounding areas. In order to improve and support daily life environment. surrounding a dam, many projects have been conducted. and the study has focused on analyzing bow to calculate error characteristics of scale effect for submerged area by using GIS spatial overlay. First, as a result of areal error in submerged area by scale based on a 1/3,000 digital topographic map, it was found that the 1/5,000 digital topographic map is 9.5 times, 9.0 times and 10.5 times more accurate than the 1/25,000 digital topographic map, respectively, in the total of areal error, standard error and areal error for submerged area. Second, as a result of analysis on areal error in areas surrounding a dam, it has been found that Jinan-eup in Jinan-gun registered the largest difference in area within 2km and 2~5km catchment area by recording 13.8 times and 20.6 times, respectively, in the 1/5,000 digital topographic map compared to the 1/25,000 digital topographic map. In addition, in areas out of catchment area within 2km, the area of occupation was very small, so there were no characteristics in error. The out of catchment area, Nami-myeon in Geumsan-gun recorded the largest errors of 31.8 times. Finally, it was found that the ratio of the total areal error in area surrounding a dam, standard error and the total areal error in the entire area using 1,5000 digital topographic map is 7.4 times, 11.8 times and 7.4 times more accurate than the 1/25,000 digital topographic map.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.183-186
• /
• 2011

본 논문에서는 모바일 초음파(mobile ultrasound) 영상신호의 빔포밍 알고리즘에서 요구되는 고성능 및 저전력을 만족시키는 매니코어 프로세서에 대한 디자인 공간 탐색 방법을 소개한다. 매니코어 프로세서의 디자인 공간 탐색을 위해 매니코어의 각 프로세싱 엘리먼트(Processing Element, PE)당 초음파 영상신호 데이터의 수를 변화시키는 실험을 통해 실행시간, 에너지 효율 및 시스템 면적 효율을 측정하고, 측정된 결과를 바탕으로 최적의 매니코어 프로세서 구조를 선택하였다.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_1
• /
• pp.1421-1434
• /
• 2020

The frequency and intensity of heatwaves have been increasing due to climate change. Since urban areas are more severely damaged by heatwaves as they act in combination with the urban heat island phenomenon, every possible preparation for such heat threats is required. Many overseas local governments build heat maps using a variety of spatial information to prepare for and counteract heatwaves, and prepare heatwave measures suitable for each region with different spatial characteristics within a relevant city. Building a heat map is a first and important step to prepare for heatwaves. The cases of heat map construction and thermal environment analysis involve various area distributions from urban units with a large area to local units with a small area. The method of constructing a heat map varies from a method utilizing remote sensing to a method using simulation, but there is no standard for using differentiated spatial information according to spatial scale, so each researcher constructs a heat map and analyzes the thermal environment based on different methods. For the above reason, spatial information standards required for building a heat map according to the analysis scale should be established. To this end, this study examined spatial information, analysis methodology, and final findings related to Korean and oversea analysis studies of heatwaves and urban thermal environments to suggest ways to improve the utilization efficiency of spatial information used to build urban heat maps. As a result of the analysis, it was found that spatial, temporal, and spectral resolutions, as basic resolutions, are necessary to construct a heat map using remote sensing in the use of spatial information. In the use of simulations, it was found that the type of weather data and spatial resolution, which are input condition information for simulation implementation, differ according to the size of analysis target areas. Therefore, when constructing a heat map using remote sensing, spatial, spectral, and temporal resolution should be considered; and in the case of using simulations, the spatial resolution, which is an input condition for simulation implementation, and the conditions of weather information to be inputted, should be considered in advance. As a result of understanding the types of monitoring elements for heatwave analysis, 19 types of elements were identified such as land cover, urban spatial characteristics, buildings, topography, vegetation, and shadows, and it was found that there are differences in the types of the elements by spatial scale. This study is expected to help give direction to relevant studies in terms of the use of spatial information suitable for the size of target areas, and setting monitoring elements, when analyzing heatwaves.

• The korean journal of orthodontics
• /
• v.29 no.5 s.76
• /
• pp.575-587
• /
• 1999

This study was designed to evaluate the correlations between tongue with skeletal pattern and intermaxillary space in Class II malocclusion adult patients. Craniofacial skeletal pattern was analyzed on the lateral cephalometric radiograph and the subjects were devided two groups by facial ratio, the 30 subjects of hyperdivergent group and the 30 subjects of hypodivergent group. The size and posture of tongue and intermaxillary space were measured on the lateral cephalometric radiograph. These data were statistically analyzed to examine significant differences between both groups and compared the correlation between tongue with skeletal measurements and intermaxillary space in each group. The results of this study were as follows. 1. In comparison of the tongue and intermaxillary space, the measurement of TS/IS showed significantly larger in hyperdivergent group and PIH and IS showed significantly larger in hypodivergent group. There were no statistically significant differences in the measurements of the height and posture of tongue. 2. In correlation between tongue with craniofacial skeletal measurements, the length and height of tongue showed the highest correlation with AFH(anterior facial height) in both groups(p<0.01). And that measurements showed high correlation with PFH(posterior facial height) in hypodivergent group. 3. In both groups, most measurements of tongue showed high correlation with intermaxillary space and the height and space of tongue showed high correlation with AIH and PIH(p<0.01).

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.2 s.40
• /
• pp.15-23
• /
• 2007

This paper presents a shoreline change analysis on a reclaimed land, using a pair of aerial photographs taken before and after the reclamation. Shorelines that are defined by a tide datum, i.e. Approximately Highest High Water Level, were mapped by both analytical and digital photogrammetric methods. The past shorelines were overlapped with digital cadastral map from which areas of retracted and protruded lands were computed. Magnitude of shoreline changes was estimated by calculating areas between the past and present shorelines. Comparisons in terms of areas showed a fairly good agreement between the two methods. However, particularly in the estuary of complex morphology, shoreline mapping by digital photogrammetric method requires images to be scanned at a resolution higher than 1200 dpi.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1B
• /
• pp.69-78
• /
• 2006

The rainfall depth-area-duration analysis which is used to characterize precipitation extremes for specification of so-called design storms, provides a basis for evaluation of drought severity when storm depth is replaced by an appropriate measure of drought severity. So we propose a method for constructing drought severity-area-duration curves in this study. Monthly precipitation data over the whole Korea are used to compute SPI. Such SPIs are abstracted to several independent spatial components from EOF analysis. Using Kriging method, these spatial components are used to constitute grid-based SPI data set over the whole Korea including Jeju island with $6km{\times}6km$ resolution. After identifying main drought events, the drought severity-area-duration curves for these events over 32-year period of record are finally constructed. As a result, such curves show the similar shape with storm-based curves in the sense that the drought severity (or rainfall depth) is inversely proportional to drought area from the curves, but drought-based curves are different from storm-based curves in the sense that the drought severity decreasing rate with respect to drought area is much less than depth decreasing rate.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.147-153
• /
• 2008

본 연구에서는 레이더 강우를 이용하여 시공간적 변동성을 고려한 격자형 면적강우량을 산정하기 위하여 추계학적 방법인 칼만필터 기법을 이용하여 지상 강우 관측망과 레이더 강우 관측망을 조합하여 면적강우량을 산정하였다. 또한 전통적인 지상 강우량을 면적강우량으로 전환하는 기법인 Thiessen법, 역거리법, 크리깅 기법을 이용하여 면적강우량을 산정한 후 칼만필터 기법에 의해 보정된 면적 레이더 강우와 비교 하였다. 그 결과, 칼만필터 기법에 의해 보정된 레이더 강우는 실제 강우 분포와 유사한 공간분포를 가지는 원시 레이더 강우 분포를 잘 재현하면서도 강우 체적(볼륨)은 우량계 자료의 체적과 유사하게 나타났다. 그리고 칼만필터 기법에 의해 보정된 레이더 강우를 물리적 기반의 분포형 모형인 $Vflo^{TM}$ 모형과 준분포형 모형인 ModClark 모형에 적용하여 홍수유출을 모의하였다. 그 결과, $Vflo^{TM}$ 모형은 첨두시간과 첨두치가 관측 수문곡선과 유사하게 모의되었으며 ModClark 모형은 총 유출체적에서 좋은 결과를 나타냈다. 그러나 매개변수 검증에서는 $Vflo^{TM}$ 모형이 ModClark 모형보다 관측 수문곡선을 잘 재현하였다. 이를 통해 지상강우와 레이더 강우를 적절하게 조합하여 정확도 높은 면적강우량을 산정하고 분포형 수문모형과 연계하여 홍수유출모의를 실시할 경우 충분한 적용성을 가지고 있음을 확인할 수 있었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.96-96
• /
• 2016

최근 들어 지구온난화 등의 환경적 요인과 지역별 온도차 등으로 인해 국지성 호우가 빈발하고 있다. 많은 양의 폭우가 좁은 지역에 집중적으로 비를 뿌리는 국지성 호우는 저지대 침수와 범람, 산사태, 축대 붕괴 등의 위험성 등을 증가시키며, 특히 도시지역은 개발로 인한 지표면의 포장 등 자연공간이 감소하여 개발 전 지표면의 유역 내 저류 및 지연효과가 현저히 감소하고 있다. 시가지의 확대와 도로포장 등 유역 내 불투수층의 증가로 홍수유출량과 첨두유출량이 점차 증가하고 있고 이러한 국지성 호우에 의한 피해는 점점 다양해지고 대형화 되고 있으며, 버스정류장 한 두개 정도의 거리에서도 호우형태가 크게 달라지고 있다. 하지만 영동지방의 경우 1개의 관측소가 $834.4km^2$, 낙동강 유역의 경우 $126.8km^2$로 간헐적으로 분포되어 있다. 많은 양의 폭우가 좁은 지역에 집중적으로 비를 뿌리는 국지성 호우를 관측하기 위해서는 고밀도의 면적강우량 산정이 필요하다. 본 연구에서는 차량용 강우센서를 이용하여 W-S-R 관계식을 개발하였으며, 대상지역인 삼척시내를 대상으로 면적강우량을 산정 하였으며, 실제 관측 면적강우량과의 비교를 통해 차량용 강우 센서를 이용하여 생산된 면적강우량의 효용성을 검토하였다.

• Tunnel and Underground Space
• /
• v.30 no.6
• /
• pp.551-558
• /
• 2020

This note presents the calculation of nominal area for rock core specimen under direct shear testing condition. The initial nominal area was assumed as ellipsoid, and the equations for calculating the nominal area are derived. The normalized shear displacement and normalized nominal area have an identical relationship regardless of the ellipsoid shape. New testing constants and the generalized method were suggested to calculate the decrease of the nominal area. The method was applied to calculate the direct shear testing data and the changes of result were discussed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.429-429
• /
• 2015

면적감소계수(ARF)는 면적강우에 대한 지점강우의 비로 정의되며, 과거 면적확률강우량 산정시 유역 내의 여러 지점강우량을 티센기법, Kriging 기법 등을 통해 공간보정을 실시하고 면적강우량을 산정하였다. 하지만 이러한 방법은 강우의 시공간분포 특성을 정확히 반영하지 못하는 단점이 있기 때문에, 최근에는 많은 연구에서 레이더 강우를 활용한 ARF를 산정한다. 기존의 연구에서 이중편파레이더를 사용하여 낙동강 유역의 호우중심형 ARF를 산정한 바 있기 때문에, 본 연구에서는 산정된 ARF 값을 적용한 설계홍수량은 분석해보고자 한다. 대상유역은 낙동강 유역내의 유역들을 대상으로 하고자 한다. 낙동강 유역에는 약 $175km^2{\sim}2000km^2$의 다양한 면적의 유역들이 존재함을 확인하였다. 따라서 면적별로 대표적인 유역을 선정하여 설계홍수량을 산정하기에 적합한 지역이라 판단된다. 설계홍수량을 산정하기 방법으로는 강우-유출 모형을 이용하고자 한다. 이용할 모형은 호주에서 개발된 IHACRES 모형으로써, 개념적인 모형으로 장기 및 단기 강우사상을 모두 모의할 수 있는 특징을 갖고 있다. 따라서 낙동강 내의 선정된 유역들을 실제 강우자료를 통해 각 유역의 매개변수를 산정하고, 확률강우량과 Huff분포를 이용한 지속시간 24시간의 설계강우량을 산정하고자 한다. 산정된 설계강우량에 앞서 소개한 이중편파레이더 ARF를 적용하여 설계홍수량을 산정하고, ARF를 적용하지 않고 산정한 설계홍수량, 두 값의 차이를 통해 ARF를 통해 감소된 설계강우량의 비와 ARF 적용 유무에 따른 설계홍수량 차이의 비를 비교하여 이중편파레이더 ARF가 면적별로 미치는 영향을 알아보고자 한다.