• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.2
• /
• pp.82-95
• /
• 2011

The objective of this paper is to analyze the GIS-based water cycle system: rainfall, evapotranspiration, surface run-off of Gyeongsanam-do for the effective rainwater management. The rainfall(1999~2008) analyzed by a spatial interpolation method, showed relatively higher amount in Hadong-gun, Sanchung-gun, and Sacheon-gun on the southwest coast than in Changnyeong-gun, Miryang-si, and Changwon-si in the mideast inland. The evapotranspiration was calculated by the three independent variables: air temperature, landuse, and NDVI(normalized difference vegetation index). The analysis showed that Namhae-gun had the highest evapotranspiration of 93.71mm, and Jinhae-si and Changwon-si had the lowest values of 81.78mm and 84.37mm. The surface run-off was analysed by a run-off equation based on the SCS hydrologic soil classification and landuse. The amount of surface run-off showed that Hadong-gun had the highest value, of 90.40mm, and Geochang-gun had the lowest, of 46.69mm. The analysis results of the GIS-based water cycle system will be used to support the establishment of the effective rainwater management plan in Gyeongasngnam-do.

• Journal of Korea Water Resources Association
• /
• v.36 no.4
• /
• pp.647-659
• /
• 2003

The purpose of this study is to evaluate hydrological applicability of spatially observed rainfall distribution data by the TRMM/PR (Tropical Rainfall Measuring Mission / Precipitation Radar). For this study, firstly, TRMM/PR data (Y) of the Yongdam-Dam Watershed (930.38$km^2$) was extracted and secondly, TRMM/PR data and the rainfall data (X) by AWS (Automatic Weather Station) were compared by executing a correlation analysis. As a result, the regression equations were deduced as two parts (under 60mm/day : Y = 18.55X-0.53, over 60mm/day : Y = 3.11X+51.16). SCS runoff analysis was conducted using 7 rainfall events in 1999 for Yongdam-Dam watershed and the Cheon-Cheon subwatershed for the revised TRMM/PR data. TRMM/PR data showed relative errors ranging from 19.6％ ti 45.6％, and from 11.3％ to 38.9％ for Cheon-Cheon subwatershed and Yongdam-Dam watershed, respectively, AWS data showed relative errors ranging from 0.5％ to 12.8％, and from -1.6％ to -10.3％, for Cheon-Cheon subwatershed and Yongdam-Dam watershed, respectively. Futher researches are necessary to evaluate the relationship between TRMM/PR data and AWS data for practical hydrological applications.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.8
• /
• pp.807-815
• /
• 2008

In this paper, design, development and evaluation of DIP(Database Interface Program) are presented. The main purpose of this study is to improve the simulation quality to get more realistic response of target system. The designed and developed major function is composed of flexible memory structure, efficient arithmetic database language and high speed interpolation/extrapolation algorithm. To evaluate the operation speed and accuracy of returned data, trim simulation is performed based on in-house software and, DIP is applied to existing real-time simulator such as engineering HQS(Handling Quality Simulator) to evaluate reliability and performance. The result of evlaution reveals that calculation speed and data accuracy are satisfied, and flight performance is satisfied in the real-time simulator environments.

• Spatial Information Research
• /
• v.22 no.2
• /
• pp.63-71
• /
• 2014

Ocean leisure sports have recently emerged as one of so-called blue ocean industries. They are sensitive to diverse environmental conditions such as current, temperature, and salinity, which can increase needs of forecasting data as well as in-situ observations for the ocean. In this context, a Web-based geovisualization system for coastal information produced by model forecasts was implemented for use in supporting various ocean activities. First, FVCOM(Finite Volume Coastal Ocean Model) was selected as a forecasting model, and its data was preprocessed by a spatial interpolation and sampling library. The interpolated raster data for water surface elevation, temperature, and salinity were stored in image files, and the vector data for currents including speed and direction were imported into a distributed DBMS(Database Management System). Web services in REST(Representational State Transfer) API(Application Programming Interface) were composed using Spring Framework and integrated with desktop and mobile applications developed on the basis of hybrid structure, which can realize a cross-platform environment for geovisualization.

• Journal of Astronomy and Space Sciences
• /
• v.14 no.1
• /
• pp.136-141
• /
• 1997

To calculate the position and velocity of the artificial satellite precisely, one has to build a mathematical model concerning the perturbations by understanding and analysing the space environment correctly and then quantifying. Due to these space environment model, the total acceleration of the artificial satellite can be expressed as the 2nd order differential equation and we build an orbit propagation algorithm by integrating twice this equation by using the Cowell's method which gives the position and velocity of the artificial satellite at any given time. Perturbations important for the orbits of geostationary spacecraft are the Earth's gravitational potential, the gravitational influences of the sun and moon, and the solar radiation pressure. For precise orbit propagation in Cowell' method, 40 x 40 spherical harmonic coefficients can be applied and the JPL DE403 ephemeris files were used to generate the range from earth to sun and moon and 8th order Runge-Kutta single step method with variable step-size control is used to integrate the the orbit propagation equations.

• Geophysics and Geophysical Exploration
• /
• v.4 no.3
• /
• pp.80-83
• /
• 2001

Four seismic reflection horizons in 3-D seismic data, coherence derived from the seismic data, and 38 well logs from the Boonsville Gas Filed in Texas were tried to be integrated and visualized in 3 dimensions. Time surface was constructed from pick times of the reflection horizons. Average velocities to each horizon at 38 well locations were calculated based on depth markers from the well logs and time picks from the 3-D seismic data. The time surface was transformed to depth surface through velocity interpolation. Coherence was calculated on the 3-D seismic data by semblance method. Spatial distribution of the coherence is captured easily in 3-D visualization. Comparing to a time-slice of seismic data, distinctive stratigraphic features could be correctly recognized on the 3-D visualization.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.457-457
• /
• 2012

말라리아는 매개체에 의한 전염병으로써 국내에서는 이미 1970년대에 사라진 것으로 알려져 있다. 하지만 1990년대에 재발생하여 2000년대 초반까지 경기도와 강원도 북부지역에서 환자가 증가하는 양상을 보였다. 사람에게서 발병하는 말라리아는 4종으로 알려져 있으나 우리나라의 경우 이 중 오로지 삼일열 원충감염에 의한 것으로 밝혀졌다(질병관리 본부, 2010). 기후변화는 질병의 발생에 영향을 미칠 수 있는 중요한 요인 중 하나로써 매개체에 의한 질병의 경우 기후요소는 매개체의 번식과 활동에 적지않은 영향을 미친다. 특히 말라리아의 경우 병원균을 가진 개체수와 모기에 물리는 횟수, 감염된 모기의 수, 그 모기에 사람이 물리는 횟수와 관계가 있으나 기온과 강수량, 습도의 변화 등 기후 및 수문학적 요소와도 밀접한 관계를 가지는 것으로 밝혀졌다(Lindsay & Birley, 1996; 박윤형 외, 2006; 신호성, 2011 재인용). 본 연구의 목적은 한반도 기후-수문학적 환경특성 및 변화를 파악하고 지역적 말라리아 발생과의 상관관계를 도출하며 이를 기반으로 하여 말라리아 발생의 변동을 예측하는 것이다. 분석에 사용된 데이터는 말라리아 발생자료의 경우, 질병관리 본부에서 제공하는 2001년 1월~2011년 12월 까지의 약 16000건의 발병자료가 포함 되었고 분석의 시간 단위는 2WEEKS 이며 전국 251개의 시군구에서 발생한 전염병을 합산하였다. 기상자료의 경우 기상청 기후자료 관리 시스템에서 제공하는 동일 기간대의 평균기온, 최고(최저)기온, 강수량, 신적설, 평균 해면기압, 평균 이슬점 온도, 평균 상대습도, 평균풍속, 평균운량, 일조시간 자료를 활용하였다. 본 연구에 사용된 AWS(Automatic Weather Station)자료의 경우 기본적으로 point 형태의 관측자료이고, 분석기간 동안의 개수에서도 차이가 있기 때문에 공간 내삽기법인 kriging을 활용하여 행정구역과 zonal하는 방법으로 재가공 하였다. 지역의 수문학적 특성의 경우 10*10 DEM을 기반으로 ESRI ArcGIS 소프트웨어의 ArcHydro 기능을 이용 하여 유역을 생성하는 방법을 채택하였다. 본 연구에서는 통계적 모형을 기본으로 기후 및 수문 특성과 말라리아 발생간의 상관관계를 분석하였으며 시계열 자료의 특성상 포아송 분포의 Generalized Estimation Equation 과 Generalized Linear Model을 이용한다(Baccini 외, 2008; 신호성, 2011). 또한 말라리아 잠복시간의 지연효과 및 전염병의 계절 영향을 반영하기 위하여 Fourier transform 을 적용 하였다.

• Korean Journal of Remote Sensing
• /
• v.38 no.5_1
• /
• pp.627-646
• /
• 2022

Recently, the seriousness of climate change-related problems caused by global warming is growing, and the average temperature is also rising. As a result, it is affecting the environment in which various temperature-sensitive creatures and creatures live, and changes in the ecosystem are also being detected. Seasons are one of the important factors influencing the types, distribution, and growth characteristics of creatures living in the area. Among the most popular and easily recognized plant seasonal phenomena among the indicators of the climate change impact evaluation, the blooming day of flower and the peak day of autumn leaves were modeled. The types of plants used in the modeling were forsythia and cherry trees, which can be seen as representative plants of spring, and maple and ginkgo, which can be seen as representative plants of autumn. Weather data used to perform modeling were temperature, precipitation, and solar radiation observed through the ASOS Observatory of the Korea Meteorological Administration. As satellite data, MODIS NDVI was used for modeling, and it has a correlation coefficient of about -0.2 for the flowering date and 0.3 for the autumn leaves peak date. As the model used, the model was established using multiple regression models, which are linear models, and Random Forest, which are nonlinear models. In addition, the predicted values estimated by each model were expressed as isopleth maps using spatial interpolation techniques to express the trend of plant seasonal changes from 2003 to 2020. It is believed that using NDVI with high spatio-temporal resolution in the future will increase the accuracy of plant phenology modeling.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.19 no.3
• /
• pp.130-139
• /
• 2017

The crop damage caused by strong wind was predicted using the wind speed data available from Korean Meteorological Administration (KMA). Wind speed data measured at 19 automatic weather stations in 2012 were compared with wind data available from the KMA's digital forecast. Linear regression equations were derived using the maximum value of wind speed measurements for the three-hour period prior to a given hour and the digital forecasts at the three-hour interval. Estimates of daily maximum wind speed were obtained from the regression equation finding the greatest value among the maximum wind speed at the three-hour interval. The estimation error for the daily maximum wind speed was expressed using normal distribution and Weibull distribution probability density function. The daily maximum wind speed was compared with the critical wind speed that could cause crop damage to determine the level of stages for wind damage, e.g., "watch" or "warning." Spatial interpolation of the regression coefficient for the maximum wind speed, the standard deviation of the estimation error at the automated weather stations, the parameters of Weibull distribution was performed. These interpolated values at the four synoptic weather stations including Suncheon, Namwon, Imsil, and Jangsu were used to estimate the daily maximum wind speed in 2012. The wind damage risk was determined using the critical wind speed of 10m/s under the assumption that the fruit of a pear variety Mansamgil would begin to drop at 10 m/s. The results indicated that the Weibull distribution was more effective than the normal distribution for the estimation error probability distribution for assessing wind damage risk.

• Journal of Korea Water Resources Association
• /
• v.49 no.3
• /
• pp.227-239
• /
• 2016

This study is to estimate Surface Energy Balance Algorithm for Land (SEBAL) daily spatial evapotranspiration (ET) comparing with eddy covariance flux tower ET in Seolmacheon mixed forest (SMK) and Cheongmicheon rice paddy (CFK). The SEBAL input data of Albedo, Land Surface Temperature (LST), Normalized Difference Vegetation Index (NDVI) from Terra MODIS products and the meteorological data of wind speed, and solar radiation were prepared for 2 years (2012-2013). For the annual average flux tower ET of 302.8 mm in SMK and 482.0 mm in CFK, the SEBAL ETs were 183.3 mm and 371.5 mm respectively. The determination coefficients ($R^2$) of SEBAL ET versus flux tower ET for total periods were 0.54 in SMK and 0.79 in CFK respectively. The main reason of SEBAL ET underestimation for both sites was from the determination of hot pixel and cold pixel of the day and affected to the overestimation of sensible heat flux.