• Title/Summary/Keyword: 공간가변성능

Search Result 87, Processing Time 0.027 seconds

Fractal Viedo Coding in Wavelet Transform Domain (웨이브릿 변환 영역에서의 프랙탈을 이용한 동영상 압축)

  • Bae, Sung-Ho;Han, Dong-Seok;Park, Gil-Heum
    • The Transactions of the Korea Information Processing Society
    • /
    • v.4 no.4
    • /
    • pp.1121-1131
    • /
    • 1997
  • In video coding at high compression rate, factal compression schemes in spatial domain have outstanding blocking artifacts and compression schemes in wavelet transform domain have rinfing artifacts at edges. In order to compensate these disadvantages, we propose a fractal video coding in wavelet transrorm domain which leads to clear edges without blocking atrifacts even at high bompression rate. The proposed method performs variable block sized motion estimation by using correlation among different subbands. Then the wavelet coefficients which are not enoded dffectively by the motion estimation are compressed by inter-frame fractal coding which predicts fine scale subbands hierarchically from the next coarser scale subbands. Computer sumulations with sev-eral test images wequences show that the proposed method shows better performance than the conventional video coding methods using fractal and wavelet.

  • PDF

A Study on the High-Performance Vector control of Induction Motor for Industrial Application (산업설비 적용을 위한 유도전동기의 고성능 벡터제어에 관한 연구)

  • 손진근;김진상;김병진;김국진;전희종
    • The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.9 no.6
    • /
    • pp.57-64
    • /
    • 1995
  • This paper deals with the modeling and simulation to control the torque and speed of an induction motor using field-oriented control methods. Rotor flux is estimated using the indirect sensing method based on the rotor circuit equation in the synchronously rotation reference frame, and slip angle and rotor position are calculated from rotor angular velocity and stator current. As results of modeling and digital simulation with a voltage source inverter, it is shown that the proposed scheme gives good static and dynamic performance to the induction motor drive.

  • PDF

Scalable multiplier and inversion unit on normal basis for ECC operation (ECC 연산을 위한 가변 연산 구조를 갖는 정규기저 곱셈기와 역원기)

  • 이찬호;이종호
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.40 no.12
    • /
    • pp.80-86
    • /
    • 2003
  • Elliptic curve cryptosystem(ECC) offers the highest security per bit among the known publick key system. The benefit of smaller key size makes ECC particularly attractive for embedded applications since its implementation requires less memory and processing power. In this paper, we propose a new multiplier structure with configurable output sizes and operation cycles. The number of output bits can be freely chosen in the new architecture with the performance-area trade-off depending on the application. Using the architecture, a 193-bit normal basis multiplier and inversion unit are designed in GF(2$^{m}$ ). It is implemented using HDL and 0.35${\mu}{\textrm}{m}$ CMOS technology and the operation is verified by simulation.

The Development of a Speed Changeable Current Controller for Driving a 10kW BLDC Motor for Revolving and Elevating a Turret a Tank (전차의 포탑 선회, 고저 구동용 10kW BLDC 전동기 가변속 전류제어기 개발)

  • Park, Moo-Yurl;Koo, Bon-Min;Choi, Jung-Keying
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • v.9 no.1
    • /
    • pp.947-950
    • /
    • 2005
  • For revolving and elevating a turret of a tank, we substitute an existing oil pressure system with an electric system using a motor and applied the vector control method to this system. A switching method of an inverter for providing desired sinusoidal current to each phase of a motor, we adopted min-max pulse width modulation method which takes less computation time, rather than space vector pulse width modulation method. We designed a digital filter and applied it to the control system. Developed current controller is verified it's performance through a current control test, speed control test, frequency response and tracking a profile of speed test.

  • PDF

SNR-based Weight Control for the Spatially Preprocessed Speech Distortion Weighted Multi-channel Wiener Filtering (공간 필터와 결합된 음성 왜곡 가중 다채널 위너 필터에서의 신호 대 잡음 비에 의한 가중치 결정 방법)

  • Kim, Gibak
    • Journal of Broadcast Engineering
    • /
    • v.18 no.3
    • /
    • pp.455-462
    • /
    • 2013
  • This paper introduces the Spatially Preprocessed Speech Distortion Weighted Multi-channel Wiener Filter (SP-SDW-MWF) for multi-microphone noise reduction and proposes a method to determine the speech distortion weights. The SP-SDW-MWF is known as a robust noise reduction algorithm against the error caused by the mismatch in microphones. The SP-SDW-MWF adopts weights which determine the amount of noise reduction at the expense of introducing speech distortion in the noise-suppressed speech. In this paper, we use the error of power spectral density between the estimated signal and the desired signal as the evaluation measure. Thus the a priori SNR is used to control the speech distortion weights in the frequency domain. In the experimental results, the proposed method yields better result in terms of MFCC distortion compared to the conventional method.

A Design of Ultra Compact S-Band PCM/FM Telemetry Transmitter (초소형 S-대역 PCM/FM 텔레메트리 송신기 설계 및 제작)

  • Jun, Ji-ho;Park, Ju-eun;Kim, Seong-min;Min, Se-hong;Lee, Jong-hyuk;Kim, Bok-ki
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.50 no.11
    • /
    • pp.801-807
    • /
    • 2022
  • In this paper, we propose an ultra compact S-Band PCM/FM telemetry transmitter. The equipment is compact, so it can be applied to a limited space and capable of stable data transmission was designed and manufactured even with specifications set differently for each operating environment and system. RF direct conversion structure is used for the miniaturization of equipment, an RF transmission board, Power distribution board, and a signal processing board were implemented on a single PCB, so that the function of the transmitter could be performed with a minimum device. According to the target specification, variable output of 1~10W and variable data rate of 390kbps~12.5Mbps is possible in S-Band(2,200~2,400MHz) without degradation of performance. To verify the performance of the equipment, the RF performance test and BER measurement test were performed after the equipment was manufactured. It was confirmed that the OBW, null-to-null bandwidth, 1st IMD, Spurious emission, Phase noise specification of the PCM/FM modulated signal which is presented by the IRIG standard were satisfied, and we can confirm the data received using the transmitter inspection equipment were transmitted normally without distortion.

A Comparative Study of IP Mobility Protocols : Fast Handover vs. Mobile IPv6 (IP 이동성 지원 프로토콜에 대한 비교 연구: Fast Handover 대 Mobile IPv6)

  • 백상헌;최양희
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.29 no.6A
    • /
    • pp.651-659
    • /
    • 2004
  • The Fast Handover protocol [1] provides seameless handover in wireless If networks by minimizing handover latency, which uses anticipation based on layer 2 (L2) trigger information. Therefore, it incurs higher signaling costs compared with the basic Mobile U protocol. Furthermore, since the L2 trigger is based on fluctuating wireless channel states, the handover anticipation may sometimes be incorrect. In the case of incorrect anticipation, unnecessary buffer space may be used for the purpose of providing a smooth handover. Therefore, it is essentical to analyze these overhead costs, in order to evaluate and compare the performance of Fast Handover with that of the basic Mobile U protocol. In this paper, we analyzed the overhead associated with Fast Handover including the signaling cost and the packet delivery cost. We formulated these costs based on a timing diagram and compared Fast Handover with basic Mobile Ipv6 in terms of their packet loss rates and buffer requirements. Also, we studied the impact of the L2 triggering time on the total overhead cost.

에어컨용 냉매압축기

  • 이승갑;소순갑;최영민
    • The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
    • /
    • v.31 no.11
    • /
    • pp.8-14
    • /
    • 2002
  • 가정용 룸에어컨이나 가정, 점포, 사무실에 사용하는 패키지에어컨은 쾌적한 주거 사무공간을 실현할 수 있기 때문에 최근 10년 동안에 광범위하게 보급되었고, 그 기술도 해마다 진보하고 있다. 그림 1에서 나타나듯이 2001년 가정용 룸에어컨의 국내생산 수량은 연간 600만대 수준이며, 패키지에어컨은 연간 약 80만대 수준이다. 2001년 기준으로 에어컨의 국내시장규모는 약 130만대로 세대 보급률이 약 40%에 도달하고 있다. 비록 패키지에어컨은 생산 수량면에서는 룸에어컨과 비교할 수 없지만, 한대의 냉방능력이 룸에어컨의 수배에서 수십배로 크기 때문에 전력에너지소비, 환경 등에 미치는 영향은 룸에어컨과 비견될 수 있다. 공조장치 보급에 따른 환경, 에너지 측면에서의 사회적 영향과 관심이 점차 커지고 있고, 이것을 개선하기 위한 기술개발이 활발하게 진행되고 있다. 에어컨을 포함한 공조장치의 다수는 효율이 좋은 증기 압축식 냉동사이클로써 구성되어 있으며, 증기 압축식 사이클에서 냉매가스를 압축하여 순환시키는 심장역할을 하고 있는 것이 압축기이다. 또한 압축기는 공조장치 전체의 전력소비의 80%에서 90%을 차지하고 있어 에너지절감 기술개발과 환경기술개발의 포인트가 되는 기구이다. 최근에 에어컨용 냉매압축기의 기술적인 개발동향을 정리하면 다음과 같은 경향으로 진행되고 있다. (1)오존층 파괴 지수가 제로인 친환경 HFC계와 자연냉매용 밀폐형 압축기기술 (2)로터리압축기의 성능향상 및 대용량화 기술 (3)압축기용 모터의 DC화통에 의한 모터 효율 향상 및 압축기 효율 향상 기술 (4)스크롤압축기의 압축비 변화의 대응, 고효율 유지, 대용량화 등 성능향상기술 (5)로터리, 스크롤, 왕복동 압축기를 이용한 용량가변기술 본 논고에서는 룸에어컨과 패키지에어컨에서 사용되고 있는 밀폐형 압축기에 대해서 그림 2에서 나타내고 있는 냉방능력 10tons(120,000Btu/h) 이하를 중심으로 상기의 최근 기술 동향을 간략하게 소개하고자 한다.

  • PDF

Performance Evaluation by Frame Discard Methods in Adaptive Bandwidth Allocation Technique for Transmission Plan of Game Moving Picture (게임 동영상 전송을 위한 적응형 대역폭 방법에서 프레임 폐기 방법에 의한 성능 평가)

  • Lee, Myoun-Jae;Kim, Tae-Eun
    • Journal of Digital Contents Society
    • /
    • v.9 no.3
    • /
    • pp.433-439
    • /
    • 2008
  • A moving picture in online game is one of major ways to advertise online games, which gives a lot of help in playing game. In this case, a moving picture is compressed to variable bit rate for efficient storage use and network resource efficiency. Adaptable bandwidth allocation technique builds a transmission plan of a game moving picture. And, then some frames are discarded when transmission rate by the transmission plan is larger than available transmission rate, until transmission rate satisfies available transmission rate. Thus, performance evaluation factors in adaptable bandwidth allocation technique may be dependent on discarding order of a frame which transmission rate is much influenced. In this paper, in order to show the performance, a CBA algorithm, an MCBA algorithm, an MVBA algorithm, [6] and [7] algorithm were applied to a transmission plan in the adaptable band width allocation technique using various frame discard methods and performance evaluation factors were compared in among smoothing algorithms.

  • PDF

Performance Comparison of Matching Cost Functions for High-Quality Sea-Ice Surface Model Generation (고품질 해빙표면모델 생성을 위한 정합비용함수의 성능 비교 분석)

  • Kim, Jae-In;Kim, Hyun-Cheol
    • Korean Journal of Remote Sensing
    • /
    • v.34 no.6_2
    • /
    • pp.1251-1260
    • /
    • 2018
  • High-quality sea-ice surface models generated from aerial images can be used effectively as field data for developing satellite-based remote sensing methods but also as analysis data for understanding geometric variations of Arctic sea-ice. However, the lack of texture information on sea-ice surfaces can reduce the accuracy of image matching. In this paper, we analyze the performance of matching cost functions for homogeneous sea-ice surfaces as a part of high-quality sea-ice surface model generation. The matching cost functions include sum of squared differences (SSD), normalized cross-correlation (NCC), and zero-mean normalized cross-correlation (ZNCC) in image domain and phase correlation (PC), orientation correlation (OC), and gradient correlation (GC) in frequency domain. In order to analyze the matching performance for texture changes clearly and objectively, a new evaluation methodology based on the principle of object-space matching technique was introduced. Experimental results showed that it is possible to secure reliability and accuracy of image matching only when optimal search windows are variably applied to each matching point in textureless regions such as sea-ice surfaces. Among the matching cost functions, NCC and ZNCC showed the best performance for texture changes.