• 지반과기술
• /
• v.11 no.1
• /
• pp.43-47
• /
• 2014

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.829-836
• /
• 1999

• The Korean Journal of Quaternary Research
• /
• v.21 no.1
• /
• pp.1-14
• /
• 2007

In this study we experiment on sand deposits (tine aggregates) taken from the old river-bed of the Bonghwang-cheon of Geum River Basin, and evaluate physical properties of fine aggregates in comparison to the KS quality regulation. As a result of experimentation, particle size of fine aggregates is generally smaller in the downstream area than in the upstream area. In addition, physical properties of the fine aggregates tend to depend on the bedrock type. Physical properties of fine aggregates show a strong positive correlation with particle size of old river-bed sediments. Finally, the general physical properties of fine aggregates are conformable to the KS quality regulation, except density and proportion of materials finer than $75{\mu}m$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.715-723
• /
• 2017

This study investigates the properties of a high-performance cementitious composite with partial substitution of stone dust for fine aggregate. The relationship between the properties and particle size distribution was analyzed using several analytical models. Experiments were carried out to examine the flowability, rheology, and strength of cement mortars with different stone-dust replacement ratios of 0-30 wt.%. The results showed improved flowability, lower rheological parameters (yield stress and plastic viscosity), and improved strength as the amount of stone dust increased. These results are closely related to the packing density of the solid particles in the mortar. The effect was therefore estimated by introducing an optimum particle size distribution (PSD) model for maximum packing density. The PSD with a higher amount of stone dust was closer to the optimum PSD, and the optimization was quantified using RMSE. The improvement in the PSD by the stone dust was proven to affect the flowability, strength, and plastic viscosity based on several relevant analytical models. The reduction in yield stress is related to the increase of the average particle diameter when using stone dust.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.4
• /
• pp.458-465
• /
• 2017

The purpose of the present study was to examine the method of physically processing oyster shells for use as raw material(aggregate) through experimentation. The results of the experiment found that the adequate particle size of the pulverized oyster shells should be smaller than 10mm due to their shape. Also, after considering various particle size distributions and residual rates by particle size, the study found the cutter mill to be the most suitable tool for pulverizing oyster shells. The use of a cutter mill resulted in recovery rates of 97.3%, 98.2%, and 98.9% for inner screens of 8mm, 12mm, and 20mm respectively, revealing how the increase of screen size results in slightly higher recovery rates. The experiment involving the difference between the inner screen of the cutter mill and the speed of the inverter shows that a smaller screen size and a faster inverter speed result in a lower fineness modulus, while a rise in inverter speed for an identical screen made possible the material recovery of a much lower range of particle sizes.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.3
• /
• pp.61-68
• /
• 2011

The pH of recycled aggregate is over 12 because of high alkalinity of cement. This high alkalinity give circumstance harmful effect. The high alkalinity of recycled aggregate can appear variously according to aggregate properties, elution time of alkalinity, aggregate size, and so on. This study analyzed recycled aggregate properties according to wet and dry type manufacture process; different test methods: waste official test, soil contamination official test, BS EN 1744-3 standard; elution time and different size to test effects of various condition. These test results can contribute to solving environmental problems by recycled aggregate. In the test results, pH of recycled aggregate was as higher as smaller particle size and as time elapsed. There was no difference between dry and wet type recycled aggregate except for difference according to elapsed time. Waste official test method got the highest pH value between pH test methods. So unified pH test method need to test recycled aggregate pH.

• Journal of the Korea Concrete Institute
• /
• v.18 no.4 s.94
• /
• pp.459-467
• /
• 2006

Recently, interest grew on the quality of aggregates following the diminution of primary resources from river as to grow construction demand and the low grade of nature sand like sea sand. Following, need is to diversify the supply sources of fine aggregates which are excessively relying on sea sand and urgency is to find as soon as possible aggregate resources that can substitute sea sand. On the other hand, various fine aggregates are utilized to produce concrete in the domestic construction fields. However, few studies have been systematically investigated on the effects of such fine aggregates on concrete properties. Therefore, this study examined the effects of comparatively widely used fine aggregates in the domestic construction fields on the quality of concrete through the analysis of the effects of such fine aggregates on the physical properties of fresh concrete and strength of hardened concrete. Results revealed that crushed sand degraded the fluidity and air entraining of concrete compared to natural aggregates like sea sand and river sand. Especially, the use of crushed sand exhibiting bad grain shape and grade was larger adverse effect on the physical properties of concrete. The type of fine aggregates appeared to have negligible influence on the strength for W/C of 55%, 45% while crushed sand decreased the strength for W/C of 35% compared to natural aggregates. It analyzed that the combination of crushed sand exhibiting bad grain shape and grade with natural aggregates improved the characteristics of fresh concrete and had negligible influence on the strength.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.4
• /
• pp.33-45
• /
• 2022

A series of model tests were performed in this study to demonstrate the clogging mechanism created during the installation of a compaction pile to improve soft ground. The application of an air-jet to extrude sand or aggregates from a casing during the installation of a compaction pile imposes a remarkably high-pressure difference between the composite soil layers of clay and sand (or aggregates), resulting in severe clogging. Therefore, a one-dimensional testing system was developed to simulate composite soil layers consisting of clay and sand (or aggregates) and to apply a high-pressure differential at both boundaries, thus replicating the extrusion process used in compaction pile installation. Herein, the performance of two construction materials for compaction piles of crushed stone and grading-controlled aggregates was compared. A series of one-dimensional model tests were performed under multiple pressure settings, with clogging depth and permeability measured in each case. Results indicate that, blinding clogging mechanisms and blocking defined by previous studies were observed for crushed stone, and a new mechanism of "infiltration" was revealed and defined. Whereas, the controlled aggregates performed excellently against clogging because only blinding was observed.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.164.2-164.2
• /
• 2010

KEPCO에서는 발전소로부터 생산되는 전력을 각 가정에 공급하기 위하여 전력선을 설치하고 있다. 이 전력선은 지상과 지중에 동시에 설치되고 있으며, 지상에 위치한 전력선을 가공선이라 한다. 지중에 설치된 전력선을 지중선이라 하며, 지중선을 설치하기 위한 공사를 지중화공사라 한다. 전력선은 전력이 통전될 때 일정한 온도 이상의 열이 발생하게 되며 이 열이 신속하게 외부로 빠져나가야지만 전력수송효율이 떨어지지 않게 된다. 지중화공사는 대부분 도로를 재굴착하여 설치하게 되며, 전력선을 설치한 후 주변 되메움재로는 모래를 이용하고 있다.하지만 최근 들어 모래의 수급이 딸리고, 가격이 높아지고 있는 관계로 이의 대체재료가 필요한 실정이다. 이에 본 연구에서는 전력선 되메움재인 모래의 대체재료로 건설폐기물의 일종이었던 순환골재를 이용하기 위하여 열저항특성을 분석하였다. 이미 순환골재는 2005년부터 공공 공사에 의무적으로 사용하도록 규정이 되어 있어 도로 또는 콘크리트 골재로 사용하고 있다. 순환골재를 전력선 되메움재로 사용하기 위해서는 열저항온도(thermal resistivity)가 $120^{\circ}C$-cm/W 이하가 되어야만 전력선 효율이 떨어지지 않기 때문에 이를 만족하는 것이 매우 중요하다. 이를 위해 QTM-500 장비를 이용하여 순환골재의 열저항 특성실험을 시행하였다. 실험의 원활한 수행을 위하여 순환골재의 입도는 5.0mm 이하로 제한하였으며, 인자로는 다짐도와 함수비를 중요한 인자로 선택하였다. 분석결과, 다짐도 및 함수비는 순환골재의 열저항온도에 영향을 미치는 주인자로 나타났으며, 일부 교호작용도 존재하는 것으로 나타났다. 향후 실험결과를 바탕으로 현장 실증실험을 수행할 예정이며, 본 연구결과는 KEPCO의 순환골재 이용기준수립에 활용할 예정이다.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2015.11a
• /
• pp.132-133
• /
• 2015

이 논문은 세라믹 비드를 일반 모르타르의 잔골재로 대체하여 사용했을 경우 모르타르의 압축강도에 변화를 확인하고자 수행하였다. 잔골재를 대체할 세라믹 비드의 입도분포를 확인하였고, 세라믹 비드의 잔골재 대체율을 10%, 20%, 30%로 설정하고 2가지 종류의 세라믹 비드를 이용하여 시험체를 제작하여 7일, 14일 28일의 압축강도를 측정하였다.