• The Journal of the Korean bone and joint tumor society
• /
• v.6 no.1
• /
• pp.30-34
• /
• 2000

Giant cell tumor of the small bones of the hands and feet is rare. Giant cell tumors in these locations develop at young age, are more commonly multifocal, and show the higher risk of recurrence than those at the end of the long bone. It should be differentiated from the other lesions of the hands, such as giant cell reparative granuloma, aneurysmal bone cyst and enchondroma. We experienced a case of giant cell tumor in the proximal phalanx of the left hand with swelling and pain. Curettage and bone graft were performed. Histologically large number of giant cells were distributed diffusely in the highly cellular stroma containing sheets of mononuclear cells. Secondary aneurysmal bone cyst and hemorrhage were associated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2197-2202
• /
• 2011

In this study, we propose a new short dental implant and investigate its bio-mechanical characteristics by using three dimensional finite element analyses. The proposed dental implant has the central cavity which can be integrated with the core of cancellous bone remained by trepanning drill. We take the Bicon short implant as a reference model for studying the effects according to the shape of cavity. The parametric finite element model using ANSYS APDL has been built to determine which length, diameter and thread of central cavity would be effective to dissipate stress. The reduction of undesirable stress in adjacent bone which can suppress bone defects and the eventual failure of implants. The numerical results shows that the cavity of well-determined shape has the beneficial effects on reducing the bone absorption in cancellous bone.

• Korean Journal of Environment and Ecology
• /
• v.24 no.5
• /
• pp.582-590
• /
• 2010

Baekdudaegan field survey has been proposed and presented as a various plan such as field survey analysis, management and restoration plan, etc. Whereas, the concerns of the Jeongmaek has increased continuously, nevertheless there is no research of present condition for Jeongmaek. This paper is to contribute to suggest for management and restoration as a basic study of vegetation structure in Yongso valley. We set up 30 plots($100m^2$) to verify the vegetation structure. As a result of classification analysis used by DCA, the type of 5 communities i.e. Pinus densiflora community, Betula schmidtii community, Populus maximowiczii community, Quercus mongolica community, Q. variabilis community were the most representative of Yongso valley vegetation communities. P. densiflora community was mainly distributed in the ridge of mountain, ridge of steep slope and stony area. In that reason, they avoid to compete with B. schmidtii community and Q. spp. community. In addition, the appearance of Rhododendron micranthum was mainly characteristics in the P. densiflora community. Species diversity indices(H') of groups were ranged from 0.7914~0.9942, the tree ages were 30~115 years. According to these results, the forests of Yongso valley not only form muti-layer vegetation structures but also have a great ecological value for protection and preservation.

• Journal of Veterinary Clinics
• /
• v.31 no.2
• /
• pp.159-162
• /
• 2014

A 4-month-old female thoroughbred foal was presented with large mass on mandibular gingiva. The enlarged mass was firm and yellowish pink in color, and occupied the whole mandibular arcade. The filly could not close her mouth with her lips. Radiographs showed radioopaque mass under the mandible. The mass was surgically excised from mandible. Histopathologically, gingival mass was characterized by hyperplastic gingival epithelium, well vascularized collagenous stroma and large area of bony tissues. Based on the gross and histopathologic findings, this case was diagnosed as ossifying epulis in the mandibular gingiva. This is the first report of ossifying epulis in a thoroughbred horse in Korea.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.4
• /
• pp.385-393
• /
• 2009

Statement of problem: High stress concentration on the crestal cortical bone has been regraded as a major etiologic factor jeopardizing long term stability of endosseous implants. Purpose: To investigate if the design characteristics of crestal module, i.e. internal type, external type, and submerged type, affect stress distribution on the crestal cortical bone. Material and methods: A cylindrical shaped implant, 4.3 mm in diameter and 10 mm in length, with 3 different crestal modules, i.e. internal type, external type, and submerged type, were analysed. An axisymmetric scheme was used for finite elment formulation. A vertical load of 50 N and an oblique load of 50N acting at $45^{\circ}$ with the implant's long axis was applied. The peak crestal bone stress acting at the intersection of implant and crestal bone was compared. Results: Under vertical load, the crestal bone stress was high in the order of internal, external, and submerged types. Under the oblique loading condition, it was in the order of internal, submerged, and external types. Conclusion: Crestal module design was found to affect the level of the crestal bone stresses although the actual amount was not significant.

• Journal of the Korean association of regional geographers
• /
• v.3 no.1
• /
• pp.165-182
• /
• 1997

The aim of this paper is to clarify geomorphic features on talus within ${\check{O}}rumkol$ and the origin of ${\check{O}}rumkol$. ${\check{O}}rumkol$ is located in Milyang of Kyungnam province, in South Korea. ${\check{O}}rumkol$ is good area to study talus. because it is characterized by following three geomorphic landscapes : free face surrounding ${\check{O}}rumkol$ ; ${\check{O}}rumkol$ with deep and wide valley floor ; lots of taluses typically developing within ${\check{O}}rumkol$. The main results can be summarized as follows: 1) The origin of ${\check{O}}rumkol$ may be suggested two assumptions : one is that its origin have been resulted from intrusion structure(intrusive rock might capture less resistant rock as tuff) ; the other is that its origin have been resulted from volcanic depression after intrusion or eruption. But these assumptions are not obvious. therefore more geological evidences will be supplemented after this 2) The characteristics of ${\check{O}}rumkol$ talus (1) Pattern ${\check{O}}rumkol$ taluses are tongue-shaped or cone-shaped in appearance. They are $50{\sim}200m$ in length and the range of the maximum width from 25 to 115m and one of their mean slope gradient from 32 to $36^{\circ}$ (2) Origin ${\check{O}}rumkol$ taluses have been formed under periglacial environment in the last glacial age and they are classified into rock fall talus type, considering in conjunction with the shape, hardness, sorting, weathering conditions of constituent debris. (3) The stage of landform development ${\check{O}}rumkol$ talus slope profiles are mainly concave slope. This concave slope type was eventually caused by talus creep at the lower end of the talus. That means new additions of debris from the free face have virtually ceased and there is no evidence of recent motion in the deposit. Now it is predominant that vegetation cover is gradually increasingly. Therefore ${\check{O}}rumkol$ taluses appear to be relict form stage. at present.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.3
• /
• pp.328-334
• /
• 2009

Statement of problem: Pier abutments act as a Class I fulcrum lever system when the teeth are incorporated in a fixed partial denture with rigid connectors. Therefore non-rigid connector incorporated into the fixed partial denture might reduce the stresses created by the leverage. Purpose: The purpose of this study was to evaluate, by means of finite element method, the effects of non-rigid connectors and supporting alveolar bone level on stress distribution for fixed partial dentures with pier abutments. Material and methods: A 2-dimensional finite element model simulating a 5-unit metal ceramic fixed partial denture with a pier abutment with rigid or non-rigid designs, the connector was located at the distal region of the second premolar, was developed. In the model, the lower canine, second premolar, and second molar served as abutments. Four types of alveolar bone condition were employed. One was normal bone condition and others were supporting bone reduced 20% height at one abutment. Two different loading conditions, each 150 N on 1st premolar and 1st molar and 300N on 1st molar, were used. Results: Two types of FPD were displaced apically. The amount of displacement decreased in an almost linear slope away from the loaded point. Non-rigid design tended to cause the higher stresses in supporting bone of premolar and molar abutments and the lower stresses in that of canine than rigid design. Alveolar bone loss increased the stresses in supporting bone of corresponding abutment. Conclusion: Careful evaluation of the retentive capacity of retainers and the periodontal condition of abutments may be required for the prosthetic design of fixed partial denture with a pier abutment.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.2
• /
• pp.193-200
• /
• 2008

Statement of problem: There have been a few studies about unsplinted implant retainted maxillary overdenture. Purpose: The purpose of this study was to examine the effect of different position of implant for 2 implants-retained maxillary overdenture. Materials and methods: Three-dimensional finite element models were used to reproduce an edentulous human maxilla with an implant-retained overdenture. Two implants in the canine tooth positions on both side and in the second premolar tooth positions on both side models were examined. Axial loads of 100 N were applied to the occlusal surface at the right first molar tooth positions. Maximum stress at the implant-bone interface and stress at the cortical bone surface just under the loading point were observed. Results and conclusion: Within the limits of this study, maximum stresses were concentrated around implant of canine position at loading side. The second premolar area was thought to be more favorable to distribution of stress on mucosa, alveolar bone and implants than canine area for maxillary overdenture.

• The Journal of the Korean bone and joint tumor society
• /
• v.9 no.1
• /
• pp.24-30
• /
• 2003

Purpose: To clarify the results of simple bone cyst (SBC) treatment in children by percutaneous autologous bone marrow grafting and xenografting. Materials and Methods: We studied seven cases (4 males, 3 females) of SBC, which were treated by percutaneous autologous marrow and heterograft bone grafting from January 1996 to February 1999. Their mean age at surgery was 10 years (6 to 15), and the mean follow-up period was 35.6 months (20 to 52). Three cases were located in the proximal and middle humerus; three cases were in the proximal femur; and one case occurred in the ilium. Mean volume was 14.7 $cm^2$ (10 to 23). Six cases were active, and one was inactive. Five patients had a history of receiving a mean of 3.2 steroid injections. The mean quantity of bone marrow used in treatment was 14.3 ml (10 to 20), and the mean amount of $Lubboc^{(R)}$ heterograft bone (Transphyto S.A. Clermont Ferrand, France) used was 6.4 blocks (5 to 10). Results were analyzed using the modified Neer classification. Results: Five cases completely healed with obliteration of the cyst cavity (Grade IV). Two cases demonstrated sclerosis around a partially visible cyst (Grade III). All treatment results were satisfactory and without intraoperative or postoperative complications. Conclusione: Percutaneous autologous marrow and heterograft bone grafting is recommended as an effective treatment method for simple bone cyst. It offers ease of operative technique, a high rate of healing, a low recurrence rate, low morbidity, a low incidence of postoperative complications, and free from bone graft donor site problems.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.128-131
• /
• 2002

Several FE models were developed based on micro-CT images of a mandibular specimen. A new dental implant model was suggested from parameter study for the relation between shape and interfacial stress of dental implants. It is found that the proposed model is highly beneficial.