• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.367-372
• /
• 2008

본 연구는 감조하천에서 조위의 영향을 크게 받는 저 평수위의 수위-유량관계곡선식 개발의 한계를 극복하기 위해 조위의 영향을 고려한 다변수 복합 수위-유량관계곡선식을 개발하였다. 곡선식 개발은 수위-수면차-수위차-유량의 관계를 통해 지수형 곡선식을 개발하였다. 여기서 수면차는 조위와 수위와의 차이며, 이때 조석파의 전파시간에 대한 지체시간을 고려하였다. 수위차는 대상 수위관측소의 전 시간과의 수위차이다. 또한 조위에 의해 발생되는 역유량 자료를 이용한 지수형 곡선식을 개발하고자 유량 조정변수를 추가하였다. 개발된 수위-유량관계곡선식을 한강대교에 적용하여 자동유량측정시설에서 측정된 유량자료와 비교 검토한 결과 경향성에서 일치하였으며, (-)유량의 산정도 가능하였다. 분석기간내의 총 유출량 검토 결과 8.3%의 오차를 보여 본 과업에서 제시된 복합 수위-유량관계곡선식의 적정성을 파악할 수 있었다.

• Journal of Wetlands Research
• /
• v.12 no.3
• /
• pp.99-106
• /
• 2010

In this study unit hydrograph and infiltration capacity curves have been determined based on rainfall-runoff data for the upper Ansung stream basin. Infiltration capacity curve also has been computed based on measurements of accumulated infiltration. Accumulated infiltration curve which has close relationship with unit hydrograph has been found in adopting the following two approach methods. In the first method the mean infiltration capacity with infiltration index method and the Kostiakov accumulation infiltration curves have been computed based on hydrological data for the GongDo gauging station of the upper Ansung stream basin. In the second method the accumulation curve has been determined through directly observed infiltration data for four points in the upper basin and has been compared with the infiltration capacity curves by three observed rainfall-runoff event.

• Journal of Korea Water Resources Association
• /
• v.37 no.7
• /
• pp.527-540
• /
• 2004

In order to investigate characteristics of the primary flow and the secondary currents in the meandering channel, laboratory experiments were conducted in the meandering channel made up of alterative bends haying 120。 arc angle. Experiments were performed in two types of cross-sections, a rectangular cross-section and a curved cross-section which was made to adopt a beta probability function. Three-dimensional velocity fields were measured using a micro-ADV. As the result of experiments, in case of the rectangular cross-section, the primary flow occurred taking the shortest course, which is similar to the result of previous researches. In case of the curved cross-section, the primary flow was expected to occur along the thalweg. but it occurred almost along the shortest way. This is considered due to effects of bottom roughness and sinuosity Not only a main cell but also a secondary cell of secondary currents were clearly shown by mean of the stream function. The secondary current intensity has the maximum value near the apex of the second bend for cases of both rectangular and curved cross-sections. However, the value of the secondary current intensity for the curved section is slightly larger than that for the rectangular cross-section. Also, in case of the rectangular cross-section, the higher the ratio of width to depth is, the larger the secondary current intensity is.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6C
• /
• pp.249-257
• /
• 2012

The reinforced earth method is financially viable. Furthermore, it overcomes environmental limitations and is therefore employed in retaining walls, slopes, foundations, roads, embankments, and other structures. However, in some cases, reinforced retaining walls are not strong enough in the curved sections and can collapse. Such mishaps are believed to occur because of an unsatisfactory analysis of the curved sections of a reinforced retaining wall. Accordingly, with the aim of investigating the workability and structural safety of curved sections of various types, this study investigates the differences in the estimated horizontal displacements of curved sections of various types and subsequently uses this information to study and analyze preliminary data so that appropriate measures can be taken to resolve alignment issues. The results of an experiment reveal that when a load is applied to curved sections of both concave and convex types, the largest horizontal displacement occurs at the center of the section. In the concave form, the earth pressure force is directed inward, whereas in the convex form, this force is directed outward. As a result, the horizontal displacement in convex forms is larger than that in concave forms. Convex reinforced earth structures are subjected to earth pressures as well as lateral earth pressure, therefore horizontal displacements in convex curved sections is larger than that of concave curved sections.

• Journal of Korean Society of Steel Construction
• /
• v.13 no.6
• /
• pp.651-659
• /
• 2001

The main purpose of this paper is to present an analytical method for free vibration of stepped horizontally curved members on two-parameter elastic foundation. The ordinary differential equations governing the free vibration of such beams are derived as non-dimensional forms including the effects of rotatory inertia and shear deformation. The governing equations are solved numerically for the circular, parabolic, sinusoidal and elliptic curved beams with hinged-hinged, hinged-clamped and clamped-clamped end constraints. As the numerical results, the lowest four natural frequency parameters are presented as the functions of various non-dimensional system parameters. Also the typical mode shapes are presented.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.649-653
• /
• 2005

유역형상의 변화에 따라서 이동강우가 유출에 미치는 영향을 운동파이론을 적용하여 분석하였으며, 유역형상은 신장형유역과 정4각형유역 및 장방형유역에 대하여 분석하였고, 이동강우 분포형은 균등분포형, 전진형, 지연형, 중앙집중형을 사용하였다. 이와 같은 형상의 유역에 대하여 다양한 이동속도를 가진 강우가 유역내 하천의 상류방향, 하류방향, 횡방향으로 이동할 때 강우분포형에 따르는 유출수문곡선을 모의하여 그 특성을 비교분석하였다. 유출수문곡선의 모양과 첨두시간, 첨두유량은 시간적, 공간적으로 변화하는 강우와 유역형상에 의하여 크게 영향을 받는다. 횡방향의 이동강우에서는 상류방향과 하류방향의 경우보다 더 큰 첨두유량이 발생하며, 하류방향 이동강우의 첨두유량은 상류방향의 첨두유량보다 더 크게 나타났다. 신장형유역의 경우 하류방향 이동강우의 첨두시간은 상류방향과 횡방향의 경우보다 더 지체되며, 수문곡선의 총유출량과 기저시간은 강우속도가 증가함에 따라 감소하였다.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.2
• /
• pp.23-36
• /
• 2019

In this paper, field measurement of the Block Type Mechanically Stabilized Earth (MSE) wall curved section was performed, and the reinforced area of the curved part is studied through the result. MSE method has been applied to various fields because of easy construction and excellent economic efficiency, so that it can be easily access in our life. However due to lack of compaction and stress concentration phenomenon, cracks and collapse occur in the curve of MSE wall, which is important for safety. The cause of collapse is lack of research on curved section, lack of design criteria, lack of construction due to economical efficiency and shortening of construction period, insufficient compaction space. In this study, therefore, it was examined the existing design and construction standards, analyzed the cause through accident examples of the curved section of the Block Type MSE wall. As a result, the horizontal displacement of the curved section was 90% higher than that of the straight section and 60% higher than that of the concave section. In the case of the convex section in the curved section reinforcement region, the maximum displacement is shown in the H/2 section in the horizontal direction from the center of the MSE wall, and the range of influence from H is shown. In the case of the concave section, the maximum displacement is shown in the center, The minimum displacement was confirmed in H/4 section in the horizontal direction from the center of the MSE wall. As a basic study on the reinforcement area rehabilitation through the actual construction of block type MSE wall, the behaviors of the straight part and the curved part were compared and analyzed. And analyzed the reinforced area in order to reduce the damage of the stress concentration phenomenon and secure the safety.

• Computational Structural Engineering
• /
• v.11 no.3
• /
• pp.155-164
• /
• 1998

이 논문은 변단면을 고려한 수평 곡선보의 자유진동에 관한 연구이다. 진동시 곡선보 요소에 작용하는 합응력과 관성력의 동적평형방정식을 이용하여 변단면 원호형 수평 곡선보의 자유진동을 지배하는 상미분방정식을 유도하였다. 이 미분방정식을 원형 단면을 갖는 선형변변단면에 적용하여 고유진동수, 진동형 및 합응력을 산출하였다. 수치 해석예에서는 양단고정 및 양단회전 곡선보를 채택하였으며, 수치해석 결과로서 고유진동수와 단면비, 세장비 및 중심각 사이의 관계를 그림에 나타내었다. 또한 실험실 규모의 실험을 통하여 본 연구결과의 타당성을 보였다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.206-207
• /
• 2003

광집적회로의 등장으로 그 설계에 있어서 다양한 구조의 광배선은 필수적 요소가 되었다. 일반적으로 전기적 배선 및 소자간에 전자기파의 간섭으로 인해 신호의 왜곡이 야기될 뿐 아니라 기생정전효과 등에 의해 소자 시간지연이 유발되듯이, 광 집적회로에서도 광배선간 감쇄필드의 겹침으로 인해 원하지 않는 광결합이 발생하게 된다. 이러한 광집적회로내에서의 이러한 불필요한 광결합을 줄이기 위해서 곡선형 구조의 광배선들이 이용되며 대부분의 경우 이러한 곡선형 도파로 부분의 광결합은 무시된다. (중략)

• Journal of Astronomy and Space Sciences
• /
• v.11 no.2
• /
• pp.196-207
• /
• 1994

Data on 27 W UMa systems having a asymmetric light curve so called O'Conell effect have been collected. Investigated 27 W UMa systems were classified into 12 positive and 15 negative type according to the shape of its asymmetric light curve. A list of members of the group, their current observational statue, and their physical and evolutional relationship to asymmetric W UMa type binaries are discussed.