• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.11
• /
• pp.2694-2703
• /
• 1993

In the vibration analysis of Timoshenko beams by the finite element method, it is necessary to use a large number of elements or higher-order elements in modeling thin beams. This is because the overestimated stiffness matrix due to the shear locking phenomenon when lower-order displacement-based elements are used yields poor eigensolutions. As a result, the total number of degrees of freedom becomes critical in view of computational efficiency. In this paper, the curvature-based formulation is applied to the vibration problem. It is shown that the curvaturebased beam elements are free of shear locking and very efficient in the vibration analysis.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.12
• /
• pp.3020-3027
• /
• 1993

Curved beam element has received attention because of its own usefulness and its bearing on general curved elements like shells. In conventional curved beam elements stiffness matrix is overestimated and eigensolutions are poor. To avoid this phenomenon it is necessary to use a large number of elements and, as a result, the total number of degrees of freedom is increased. In this paper the two-noded, with three degrees of freedom at each node, in-plane curvature-based curbed beam element is employed in eigen-analysis of curved beam. It is shown that the curvature-based beam element is very efficient in vibration analysis and also that it is applicable to both thin and thick curved beams.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.1
• /
• pp.100-114
• /
• 1996

In this paper, a new thin-walled beam finite elcment is developed to overmome the difficulties in the analysis of real structures by existing beam elements. The element is formulated by extending Benscoter's assumption and also by adopting the concept of the curvature-based element. It is applicable to the analysis of the beams with arbitrary cross-sectional shapes. The results obtained show that the element is locking-free and the accuracy of the finite element solutions is remarkably improved.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.6
• /
• pp.497-504
• /
• 2012

Finite element analysis is to approximate a geometry model developed in computer-aided design(CAD) to a finite element model, thus the conventional shape design sensitivity analysis and optimization using the finite element method have some difficulties in the parameterization of geometry. However, isogeometric analysis is to build a geometry model and directly use the functions describing the geometry in analysis. Therefore, the geometric properties can be embedded in the NURBS basis functions and control points so that it has potential capability to overcome the aforementioned difficulties. In this study, the isogeometric structural analysis and shape design sensitivity analysis in the generalized curvilinear coordinate(GCC) systems are discussed for the curved geometry. Representing the higher order geometric information, such as normal, tangent and curvature, yields the isogeometric approach to be the best way for generating exact GCC systems from a given CAD geometry. The developed GCC isogeometric structural analysis and shape design sensitivity analysis are verified to show better accuracy and faster convergency by comparing with the results obtained from the conventional isogeometric method.

• Economic and Environmental Geology
• /
• v.50 no.2
• /
• pp.129-143
• /
• 2017

The shallow sediments in the southwestern Ulleung Basin consist of mass flow deposits such as slide/slump and debris flow deposits (DFD), caused by slope failure. These sediments are proven to be important in studying geological disaster and stability of the seafloor. In this paper, we analysised the flow accumulation and slope failure susceptibility of the Ulleung Basin on the basis of multi-beam data, collected in this area. We also studied the distribution pattern and the seismic characteristics of the DFD in the uppermost layer of the Ulleung Basin on the basis of seismic data. The slope susceptibility was calculated as the frequency ratio of each factors including slope, aspect, curvature and stream power index (SPI), which causes the slope failure. These results indicate that the slope failure is frequently to occur in the southern and western continental slope of the Ulleung Basin. The sediment flow (mass flow) caused by the slope failure converges to the north and northwest of the Ulleung Basin. According to the seismic characteristics, the uppermost layer in study area can be divided into four sedimentary unit. These sedimentary units develop from the south and southwest to the north and northwest in association with slope susceptibility and flow accumulation.