• Journal of the Korean GEO-environmental Society
• /
• v.12 no.1
• /
• pp.35-40
• /
• 2011

Magnesia-carbon brick is used to refractory material in Converter and/or Ladle furnace for molten steel manufacturing. The rapid growth of steel making industry, molten steel industry is increased. Therefore, growth of molten steel industry lead to make waste magnesia-carbon brick by repair of Converter and/or Ladle furnace. These waste magnesia-carbon brick is abandoned all. Besides, as it is loosely composed of silt and clay including sand falling according to the type of gangue, rainwater inflows and outflows relatively easily, but silt or clay particles absorb water for a long period, weakening ground. This study tried to show that when colluvial soil is solidified using waste magnesia-carbon brick powder as a way to solidify strengthen the rigidity of colluvial soil.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.2
• /
• pp.53-61
• /
• 2023

Most of the sewage sludge is organic waste containing a large amount of organic substances decomposable by microorganisms by biological treatment. As for existing sewage sludge treatment methods, reduction and fuel conversion are being carried out using technologies such as drying, incineration, torrefaction, carbonization. However, the disadvantage of high energy consumption has been pointed out as latent heat of 539 kcal/kg is consumed based on drying. Therefore, in this study, we intend to produce solid fuel through hydrothermal carbonization(HTC), which is a thermochemical treatment. To evaluate the value of solid fuel, the characteristics of carbonization and fuel ratio were analyzed. As a result, as the hydrothermal carbonization reaction temperature increased, the lower heating value also increased by about 500 kcal/kg due to the increase in the degree of carbonization. H/C, O/C, ratio showed a decreasing trend from 1.78, 0.46 to 1.57, 0.32. When the ratio of ash to combustible content (fixed carbon + volatile) of dry sludge was 0.25 or more, it was derived that the degree of carbonization and calorific value did not increase even when hydrothermal carbonization was performed.

• Economic and Environmental Geology
• /
• v.39 no.6 s.181
• /
• pp.699-710
• /
• 2006

Batch scale experiments to investigate the efficiency of the solidification process for metal mine tailing treatment were performed. Portland and MSG (micro silica pouting) cements were used as solidifier and three kinds of mine tailings (located at Gishi, Daeryang, and Aujeon mine) were mixed with cements to paste solidified matrices. Single axis com-pressible strengths of solidified matrices were measured and their heavy metal extraction ratios were calculated to investigate the solidification efficiency of solidified matrices created in experiments. Solidified matrices ($5cm{\times}5cm{\times}5cm$) were molded from the paste of tailing and cements at various conditions such as different tailing/cement ratio, cement/water ratio, and different cement or tailing types. Compressible strengths of solidified matrices after 7, 14, and 28 day cementation were measured and their strengths ranged from 1 to $2kgf/mm^2$, which were higher than Korean limit of compressible strength for the inside wall of the isolated landfill facility ($0.21kgf/mm^2$). Heavy metal extractions from intact tailings and powdered matrices by using the weak acidic solution were performed. As concentration of extraction solution for the powdered solidified matrix (Portland cement + Gishi tailing at 1:1 w.t. ratio) decreased down to 9.7 mg/L, which was one fifth of As extraction concentration for intact Gishi tailings. Pb extraction concentration of the solidified matrix also decreased to lower than one fourth of intact tailing extraction concentration. Heavy metal extraction batch experiments by using various pH conditions of solution were also performed to investigate the solidification efficiency reducing heavy metal extraction rate from the solidified matrix. With pH 1 and 13 of solution, Zn and Pb concentration of solution were over the groundwater tolerance limit, but at pH $1{\sim}13$ of solution, heavy metal concentrations dramatically decreased and were lower than the groundwater tolerance limit. While the solidified matrix was immerged Into very acidic or basic solution (pH 1 and 13), pH of solution changed to $9{\sim}10$ because of the buffering effect of the matrix. It was suggested that the continuous extraction of heavy metals from the solidified matrix is limited even in the extremely high or low pH of contact water. Results of experiments suggested that the solidification process by using Portland and MSG cements has a great possibility to treat heavy metal contaminated mine tailing.

• Korean Journal of Microbiology
• /
• v.24 no.4
• /
• pp.385-388
• /
• 1986

In a study of the aerobic growth of Baker's yeast (Saccharomyces cerevisiae) on Maxon-Johnson medium (with glucose as substrate) solidified with kudzu root starch, it was observed that between 8 and 24 hour incubation. 10 and 12% solids stimulated greater cell production than did 6 and 8% solids. The concentration of solids also affected thd secretion of protein from the yeast cells with the highest content of extracellular protein at 10-24 hour incubation stimulated by 10% starch solids.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.9
• /
• pp.142-149
• /
• 1994

Hangul is expressed by the basic elements, twenty-four characters. Because these characters are composed of a circle and lines, Hough transform(HT), which has a powerful performance on the noise in extracting lines, is introduced. Many difficulties often occur when the original HT is used to extract strokes and it's direction, position and length from handwritten Hangul characters. Original HT has eight direction selected as samples in the transformed image should be calculated for these eight directions. In this paper, the generalized sampling rule is suggested. According to the rule, those directions which are possible to a line are the only thing to be calculated. The experoment result turned out to be higher than the method that Chen suggested in sampling rate. Anogher experiment result is done on the 1800 handwritten Hangul characters that 10 persons wrote. By feature extracting the oritinal HT and sampling HT. And as a result of six type classification, the suggested method came out higher than original HT.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2005.05a
• /
• pp.224-227
• /
• 2005

본 연구에서는 국내 폐금속광산의 대표적인 폐기물 중 상동광산광미를 안정화, 고형화 및 감량화 시키기 위한 일환으로 광미를 실용적인 흙도로 포장재료로 사용하기 위한 모르타르 실험을 실시하였다. 모르타르에 사용된 고화제는 시멘트계 고화제를 사용하였으며, 상동광미는 대상 흙에 대하여 10% 중량비 치환한 경우 강도증진 효과가 있었다 따라서 상동광미를 흙도로용 포장재료로 사용할 수 있는 가능성을 얻을 수 있었다.

• Resources Recycling
• /
• v.6 no.2
• /
• pp.70-77
• /
• 1997

The paper revlcws [he kinds and thcir physical and chemical characleristics of varlnus plastics. The nccds for ~ccycling of used plastics are emphasized and problems and challcngcs ilssoclatcd with treatments of such used plastics are described It aLra makes various suggestions to meet and solve these problems.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.5
• /
• pp.732-736
• /
• 1986

This paper propose a novel vector-quantized block truncation coder for image data compression. A data compression ratio of about 3-6 times larger than that of the BTC can be achieved by utilizign a vector quantizer with the BTC. A vector quantizer was realized by computer simulation. The compressed data rate of 0.7~1.0 bit/pel with intraframe coder and that of 0.3~0.5 bit/pel with interframe coder gives a good performance.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.5
• /
• pp.5-13
• /
• 2008

In this study, It was carried out to evaluate the feasibility of recycled crushed concrete as aggregate used cement mortar replace sand and to investigate engineering properties of recycled aggregate for hazardous waste solidification. The compressive strength of cement mortar replaced 5-15% (wt.) recycled aggregate was over $163kgf/cm^2$ which is the standard of first grade concrete block class C. And cement mortar was examined to evaluate the stability by leaching test. Cu, Cd, Pb, Cr, and As as the heavy metals were proved very stable but mercury (Hg) was leached high concentration because it was simply tied to the cement surface. We investigated the crystal structures of cement mortar and they had shown the peaks of $Ca(OH)_2$, ettringite, and CSH (calcium silicate hydrate). As the result, the longer curing time, the higher CSH peak that means to increase compressive strength and the cement mortar was more stable. Therefore it was shown that it may be possible to apply hazardous waste solidification using recycled aggregate, fly ash and sewage sludge ash.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.294-301
• /
• 2017

In this study, we found the optimal manufacturing conditions of livestock manure sludge RDF with the oil-drying method. We performed oil evaporation, oil drying and pelletizing of the sludge to evaluate the value of the product (sludge RDF), and measured the performance of the product using calorimeter and PXRF equipment. Also, we conducted the calorie comparison test between sludge RDF manufactured in this study and wood RDF generally used in the field. Experimental results showed that 30g of the sludge treated by vegetable oil at $130^{\circ}C$ for 25 minutes were the optimal conditions to make the sludge RDF (considering the aspects of eco-friendly and mass production). The caloric value of the sludge RDF manufactured in this study was 5211kcal/kg which is higher than that of wood RDF used widely in the market. Finally, PXRF results showed sludge RDF contains no heavy metals with the exception of sulfur. Therefore, we recommend more study about the sulfur control process for future development of the industrial manufacturing process.