• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.593-594
• /
• 2010

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1379-1384
• /
• 2009

High power light emitting diode(LEDs), a strong candidate for the next generation general illumination applications are of interest. With major advantages of power saving, increased life expectancy and faster response time over traditional incandescent bulb, the LEDs are rapidly taking over many applications such as LCD backlighting, traffic light, automotive lighting, signage, etc. The increased electrical currents used to drive the LEDs have focused more attention on the thermal management because the efficiency and reliability of the solid-state lighting devices strongly depend on successful thermal management. There exist some problems that are caused by heat generation in the LED package, such as wire breakage, yellowing of epoxy resin, lifted chip caused by reflow of thermal paste chip attach and interfacial separation between LED package and silicon resin. The goal of this study is to analyze high power LED thermal properties of using pulsating heat pipe.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.12
• /
• pp.23-30
• /
• 2009

LEDs are increasingly used for many applications including automotive, aviation, display, transportation and special lighting applications. Generally, the RGB multichip LED luminaire applied to signboard, emotional lighting system and display device and the white LED luminaire applied to general lighting system. white LED spectra for general lighting should be designed for high luminous efficacy as well as good color rendering. This paper describes characteristics of LED luminaire white LED and RGB multichip LED. Two type of LED luminaire prototype used experiment physical, electrical and optic test and performance analyzed. RGB multi-chip and phosphor-type white LED luminaire were analyzed by experiment on their color characteristics and luminous efficacy of radiation, distribution curve, and electrical characteristics. Research work is in progress to develop an improved performance for optic and electrical works well for two type of LED luminaires.

• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.1111-1117
• /
• 2011

We was designed the portable LED light which can shadowless shooting and developed using a high-power LED that medical attention as a new lighting components for structural confirmation of oral dental area, medical and surgical lesions in the local area. LED which applied to the development, was used the 3-color LEDs for possible of implement a variety of colors and adjusted the light intensity. It is being magnified of delicacy expressiveness and three-dimensional for tone of the subject-specific. It has been developed a highly efficient light module that LED is used to consider the electrical characteristics and optical properties. SMPS has We was designed the portable LED light which can shadowless shooting and developed using a high-power LED that medical attention as a new lighting components for structural confirmation of oral dental area, medical and surgical lesions in the local area. LED which applied to the development, was used the 3-color LEDs for possible of implement a variety of colors and adjusted the light intensity. It is being magnified of delicacy expressiveness and three-dimensional for tone of the subject-specific. It has been developed a highly efficient light module that LED is used to consider the electrical characteristics and optical properties. SMPS has produced for use in mobile that can be driven at low voltage. In addition, it was also possible to implement a variety of colors from monochromatic Light to polychromatic light using by PWM control method and were available 32,768.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.509-510
• /
• 2010

• 프린팅코리아
• /
• v.12 no.3
• /
• pp.92-93
• /
• 2013

작업량과 시간, 기계를 뛰어넘어 수만 번의 출력에도 일관적인 고품질의 인쇄를 유지하는 '오세 다이렉트 프레스' 는 사용자의 신뢰를 얻기에 충분하다. 가변 데이터 처리를 통해 기존 출력 방식의 LED, 정착 온도, 습도, 정전하, 디벨로퍼와 폐토너의 영향을 받지 않는 안정성과 컬이 없는 일관성 있는 출력품질은 오세의 타협 없는 자부심이 낳은 결과다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.6
• /
• pp.681-687
• /
• 2013

This study analyzed characteristics of 240 W high power LED lamps by comparing with those of traditional metal halide lamps. In addition, it analyzed the propriety of LED lamps as a source of light, considering seawater transmission characteristics. When Applying white LED package with the color temperature color temperature of 6500K, a 240W-LED fishing lamp has a characteristics of the luminous angle to be expanded to ${\pm}45^{\circ}$, the illumination change was improved to 0.8, as well as the luminance efficiency was improved to 98.8lm/W. As results of comparison between one 1,500W-metal halide lamp and four 240W-LED lamp with considering a seawater transmission and a luminous efficiency of scotopic vision, the radiant flux of two lamps were almost equal level at 50m depth and the luminous flux was 5% higher LED lamp than metal-halide lamp even if only applying the luminous efficiency of scotopic vision. As the luminous flux of LED lmap was 14% higher than that of metal-halide lamp with applying the luminous efficiency of scotopic vision to radiant flux at 50m depth, so LED fishing lamp was verified to alternative possibility of metal-halide lamp.

• Korean Journal of Optics and Photonics
• /
• v.24 no.6
• /
• pp.342-346
• /
• 2013

We present the thermal analysis result of die bonding for a high power LED package using a metal hybrid silicone adhesive structure. The simulation structure consists of an LED chip, silicone die adhesive, package substrate, silicone-phosphor encapsulation, Al PCB and a heat-sink. As a result, we demonstrate that the heat generated from the chip is easily dissipated through the metal structure. The thermal resistance of the metal hybrid structure was 1.662 K/W. And the thermal resistance of the total package was 5.91 K/W. This result is comparable to the thermal resistance of a eutectic bonded LED package.

• Photonics industry news
• /
• s.25
• /
• pp.48-53
• /
• 2004

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3144-3146
• /
• 1999

$8{\sim}12$인치의 원형(또는 사각) PCB 기판에 수백 개의 고휘도 반도체 발광 다이오드(Light Emitting Diode. LED)와 구동 회로로 구성되는 LED 교통 신호등은 특정 파장대의 단색광을 발광하므로, 기존의 백열전구식 신호등에 비해 시인성이 좋고, 80 % 이상의 에너지 절약이 가능하다. 그러나 LED는 주위 온도에 따라 밝기가 변화하는 특성이 있다. 신호등은 기능상 외부 온도의 영향 없이 항상 일정한 광도를 유지해야 하므로, 본 논문에서는 외부 온도의 변화에 관계없이 일정한 광출력을 유지할 수 있는 LED 구동회로를 설계한다 이를 위해 정전압 및 정전류로 구동되는 LED의 온도에 따른 광출력 특성 실험이 수행되고, 이러한 데이터들을 바탕으로 정광출력 LED 신호등 구동회로가 설계되고 그 성능을 평가한다.