• Korean Chemical Engineering Research
• /
• v.56 no.6
• /
• pp.864-870
• /
• 2018

The effect of lower bed height on the collapse velocity was investigated for a two-stage bubbling fluidizedbed (0.1 m in diameter, 1.2 m high) connected with a standpipe (0.025 m in diameter) for solid transport. Air was used as fluidizing gas and mixture of coarse (< $1000{\mu}m$ in diameter and $3625kg/m^3$ in apparent density) and fine (< $147{\mu}m$ in diameter and $4079kg/m^3$ in apparent density) particles as solid particles. Mixing ratio of fine particles, height of the lower bed and the distributor of the upper bed were considered as experimental variables. The collapse velocity increased with static height of the lower bed. However, the effect decreased as the mixing ratio of fine particles increased. The effect seemed to be attributed to the increase in height of the dense layer of coarse particles that prevented the gas from flowing into the standpipe, not in pressure drop for the standpipe, as the bed height increased. The collapse velocity decreased a little as the pressure drop of the distributor of the upper bed increased. An improved correlation was proposed for predicting the collapse velocity.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.271-274
• /
• 2007

In the fuel of the solid fuel ramjet there are metal particles in order to improve the Isp like as solid rocket propellants. Because of the short combustion residence time these metallized fuels have low combustion efficiencies. Therefore it is necessary to increase the combustion efficiency and the inlet air temperature does an important role to this. The main factors to affect the inlet air temperature is the free stream temperature and the flight Mach number. Also the flow velocity in the combustor does an important role, therefore entire range of the air flow; from the stagnation to the sonic velocity in the ramjet combustor is considered.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.5
• /
• pp.18-26
• /
• 2013

This study suggested techniques to reduce burning rate and their effects for the AP thermoplastic composite propellant. Burning rate obtained through ground tests using a small size motor were analyzed to investigate the effects of AP particle size and LiF of 0.5~2.0% on the inhibition reaction for the PEBAX/AP thermoplastic propellant. The results showed that utilization of large size particle of AP and addition of LiF under 2.0% can reduce the burning rate sufficiently and their quantitative effects were suggested in this paper.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.181-184
• /
• 2009

In this study, flow visualization method to simulate internal flows of solid rocket motor in a water tunnel is introduced. The tunnel provides excellent visualization of vortex flows and has been used to propellant grain design of the solid rocket motor. A water tunnel is suggested for the research and the visualization test using dye, hydrogen bubble generator and PIV has been studied and discussed.

• Tribology and Lubricants
• /
• v.10 no.1
• /
• pp.1-9
• /
• 1994

어떤 유체는 전기장에서 순간적으로 고체화한다. 이러한 다변형의 물질은 더욱 신속하고 적절한 기계의 앞날을 약속하고 있다. T-1000 (영화 터미네이터2; 심판의 날에서 생동하는 거의 불멸의 로보트)는 능숙하게 액체에서 고체로 변환다. T-1000은 총탄으로 관통되었을 때, 로보트의 액체-금속 피부는 관통된 구멍으로 흘러 들어가고, 산산조각이 났을때 T-1000은 녹아버린 후에 다시 제원형으로 응결된다. 전기유변성 유체는 이 영화제작자의 상상력에 어느 정도 적용될 수 있을 것이다. 전기유변성 유체는 전기장이 있는 곳에서 변형을 일으키는 물질이다. 주어진 전기장의 세기에 따라 전기유변성 유체는 물처럼 자유롭게 흐르기도 하고, 꿀처럼 진득하게 흐르기도 하며 제라틴처럼 고체화하기도 한다. 참으로 물질이 수천분의 일초사이에 한상태에서 다른 상태로 변할 수 있는 것이다. 전기유변성 유체는 만들기 쉽다; 절연액체에 미시적 입자가 분산된 것이다. 그러나 아직은 상업용으로 쓰이지 못하고 있다. 여러가지 문제점 중의 하나가 고체로서는 구조적으로 약하고, 또, 액체로서는 마찰성이 문제이며, 특히 고온에서는 화학적으로 불안정하다는 것이다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.04a
• /
• pp.25-25
• /
• 2000

가스발생기와 같이 로켓모터에서 추력이 아닌 기체압 형태의 에너지를 일정한 시간동안 얻고자 하는 경우, 로켓모터의 크기 및 추진제 충전율을 고려하여 그레인 형태를 단면 연소형으로 선택할 수 있다. 단면 연소형 그레인을 가진 로켓모터는 그레인의 연소시, 일찍 연소된 부분의 라이너가 추진제 연소 화염에 노출되면서 표면부터 서서히 분해가 진행되며, 분해물질의 일부는 추진제에 포함된 산화제 성분에 의해 산화되어 기체화 될 수 있다. 산화제 성분이 충분치 않은 경우에는 고체 입자 형태로 추진제 연소 기체와 함께 배출되며, 이는 일차연기(primary smoke)의 일종으로 볼 수 있다. 가스 발생기에서 얻고자 하는 기체는 고체 입자가 포함되지 않은 깨끗한 기체형태인 경우가 대부분이며, 따라서, 무연 라이너 및 내열재의 연구가 필요하다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.9
• /
• pp.817-824
• /
• 2000

The fluidized solid particles not only increase heat transfer rates but have a cleaning function eliminating contaiminated substances caused from condensate water. An experiment was performed to measure heat transfer rates and pressure drops in a fluidized heat exchanger with circulating solid particle for constant heat transfer rate. As a results, the heat transfer rate increased by 26.9~2.6%, heat transfer coefficient by 11.9~2.7%, and pressure drop by 79.1~10.9% at the gas velocity of 6.1 ~12.1 m/s and solid particle flow rate of 100~50 kg/h with the heat exchanger of H: 50 mm, $D_p=2 in,\; and\;D_{BP}$=30 mm.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03a
• /
• pp.171-175
• /
• 2008

In the present study, a numerical simulations are investigated in a stirred solid/liquid system by using Eulerian multi-phase model. The transient flow field of liquid phase and distribution of solid particles are predicted in stirred tanks consisting of 4-pitched paddles impeller and baffles. The effects of number and width of baffles on the mixing time and the quality of solid suspension in a stirred tank are presented numerically. The result shows that the mixing time decreases as the width and number of baffles increase.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.9
• /
• pp.2916-2923
• /
• 1996

A numerical analysis of the moving bed heat exchanger of solid particles inside the vertical pipe was performed using finite difference method. Also, the theoretical solutions were obtained for comparison when the wall heat flux or the wall temperature was assumed constant. The comparison showed that their results agreed well each other. The moving bed heat exchanger was classified as countercurrent-flow, parallel-flow, and cross-flow types according to the gas flow direction. For each type, the thermal efficiency of heat exchanger was calculated as a function of non-dimensional parameters such as the characteristic length of heat exchanger, Biot number and the ratio of thermal capacities of gas and solid particles.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.705-710
• /
• 2001

The commercial viability of heat exchanger is mainly dependent on their long-term fouling characteristics because the fouling increases the pressure loss and degrades the thermal performance of a heat exchanger. An experimental study was performed to investigate the characteristics of fluid flow in a fluidized bed heat exchanger with circulating various solid particles. The present work showed that the drag force coefficients of particles in the internal flow were higher than in the external flow, in addition, they were lower with the shapes of particles being closer to the spherical geometries.