• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.484-488
• /
• 2010

In this study, combustion experiments of the End-Burning Hybrid Propulsion System using $GN_2O$(Gas Nitrous oxide)/HDPE were performed and the results were compared to those of the combustion experiments using GOX/HDPE. The regression rate of the solid fuel using $GN_2O$ is lower than that of the solid fuel using GOX since oxidizer inlet velocity of $GN_2O$ is lower than that of GOX. However, in case of using $GN_2O$, the characteristic velocity is higher than those of the GOX. The combustion chamber pressure and thrust were relatively kept constant during combustion.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.4
• /
• pp.371-377
• /
• 2020

Combustion instability occurred in the combustion test of solid rocket motor with large aspect ration Length/Diameter (L/D) and cylinder-slot grain. As a result of spectral analysis of the pressure perturbation, it was confirmed that the central axis longitudinal frequency was dominant, so that the length of the cylinder part was increased to eliminate the coincidence with acoustic node. In addition, acoustic modal analysis and flow analysis were performed to analyze the cause of instability by unsteady flow structure in solid rocket motors. It was confirmed that the combustion instability is reduced by quantitative comparison of the amplitude and frequencies of the pressure inside the combustion chamber using the grain shape before and after the design change. Finally, a combustion test was performed to verify that the combustion instability was resolved as in the flow analysis.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.221-226
• /
• 2008

Novel synthetic routes were proposed for hydroxy-terminated Poly(EO-co-THF) by Cationic ring-opening copolymerization of Tetrahydrofuran(THF) and Ethylene oxide(EO). It was carried out using Boron trfluoride tetrahydrofuranate($BF_3$ THF complex) as catalyst in the presence of 1,4-butandiol. The resultant products are well-defined linear polyetherpolyol. Polyurethane(TPU) were prepared using resultant polyetherpolyol with IPDI/N-100 as curing agent and TPB(Triphenylbismuth) /MA(Maleic anhydride) mixture as cure catalyst. Mechanical properties of TPU prepared from poly(EO-co-THF) polyol were investigated and compared with polyurethane using ATK HTPE.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.3
• /
• pp.15-20
• /
• 2013

The graphites as airtight structure seals prevent high-pressure and high-temperature gas from flowing into actuator of propulsion system and generate lubricant film during wear procedure to assist lubricant and sealing. In this study, the tribological characteristics of the graphite in high-temperature are evaluated. In order to evaluate the tribological characteristics of high density graphite(HK-6), variables which are temperature, sliding speed and contact load are set. this study suggest optimized environment conditions through the wear properties of graphite. Consequeantly, high temperature is better than at room temperature to generate lubricant film, so that friction coefficient of graphite is lower at high temperature than at room temperature.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.651-663
• /
• 2017

Experimental results of $30^{\circ}-15^{\circ}$ nozzles were compared with numerically calculated convective heat transfer coefficients using FLUENT, Boundary Layer Integration Method and Bartz predictions. Also, the convective heat transfer coefficients were calculated by using FLUENT and boundary layer integration method for NASA HIPPO nozzles according to the characteristics of combustion gas and the correlation between pressure and pressure was compared. Finally, thermal analysis of NASA HIPPO nozzle was performed to compare the ablation thickness and char depth according to the combustion gas characteristics.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.70-75
• /
• 2012

In this paper, the regression rate of the End-Burning Hybrid Rocket with variation of swirl intensity was investigated experimentally with the variation of fuel diameter, injector shape and angle. When fuel grain diameter is large, fuel mass flow rate increases. And the injector diameter increase, fuel regression rate decrease. The impinging effect of oxidizer flow on fuel surface for fuel combustion efficiency is stronger than swril effect in this End-burning propulsion system. The relation between the regression rate, oxidizer mass flux and swirl intensity was obtained.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.3
• /
• pp.81-124
• /
• 2020

In liquid oxygen/kerosene liquid rocket engines, kerosene is not only a propellant but also plays a role as a coolant to protect the combustion chamber wall from 3,000 K or more combustion gas. Since kerosene is exposed to high temperature passing through cooling channels, it may undergo heat-related chemical reactions leading to precipitation of carbon-rich solids. Such kerosene's thermal and fluidic characteristic test data are essential for the regeneratively cooled combustion chamber design. In this paper, we investigated foreign studies related to regenerative cooling channel and kerosene. Starting with general information on hydrocarbon fuels including kerosene, we attempted to systematically organize sedimentary phenomena on cooling channel walls, their causes/research results, coking test equipments/prevention methods, etc.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.3
• /
• pp.345-351
• /
• 2014

Dinitramide ($N(NO_2)_2$) salts are one of plausible oxidizing agents for a high efficient propellant. Guanidine dinitramide (GDN) is an organic salt improving its stability against moisture, so that enables massive production and long term storage. Several types of GDN (GDN-1,2,3,4,5) were synthesized using some types of starting materials such as guanidine acetate, chloride, carbonate, nitrate and sulfate. As a result of the experimental work, synthesized GDN from the carbonate salt appeared fairly pure relatively higher yield (99%) than the other samples. The absorption wave length of all prepared GDNs by FTIR were found at 3452, 3402, 3354, 3278, 3208, 1642, 1570, 1492, 1416, 1337, 1179 and $1000cm^{-1}$. DSC analysis found a thermal phase change at $130^{\circ}C$, and indicated exothermic reaction at about $150^{\circ}C$ to $160^{\circ}C$.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.23 no.4
• /
• pp.30-35
• /
• 2015

In this paper, a theoretical study of low frequency non acoustic instability, the $L^*$ instability, of a solid rocket motor is investigated. The $L^*$ stability criterion is determined by analysing the $L^*$ stability curves of two very distinct propellants for five different geometrical combustors. The $L^*$ instability of two extreme fuels showed totally different behavior in terms of operating pressure of the combustor. A parametric study on the stability for different chamber volume and different throat area keeping constant $L^*$ is conducted and analyzed. It was found that one of the main parameters, the non-dimensional critical characteristic time, requires an enough margin from the critical $L^*$ stability curve.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.2
• /
• pp.8-14
• /
• 2011

In this paper, the combustion characteristics of hybrid rocket fuel with tapered grain port were investigated experimentally. The charging efficiency of convergent and divergent port shape fuel with $1^{\circ}$ taper angle was 6.8% higher than that of cylindrical port shape fuel. The regression rate was increased about 17.5% by using the convergent port shape fuel. On the other hand, in case of divergent port shape fuel, no notable difference of regression rate was observed when compared to that of the cylindrical port shape fuel. In the case of convergent port shape fuel, characteristic velocity and its efficiency were notably increased with respect to cylindrical port fuel. It was found that convergent port shape of hybrid rocket fuel can lead to a better option compared to the conventional cylindrical port in terms of combustion efficiency and performance improvement.