• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.109-116
• /
• 2003

The amount of radioactive waste is expected to be increased continuously because of the rapid growth of the domestic nuclear industry, full power operation of the HANARO reactor and the increased research activities of the nuclear fuel cycle. Accordingly the efforts are focused to achieve the handling of radioactive waste in safe and reduce the volume of radioactive waste. The PIEF is carrying out the PIE (post irradiation examination) of spent fuel rods related to the identification of cause defect and evaluation of integration safety. This study describes the technologies and experiences of compaction, shredding and cutting of the solid radioactive waste used in the PIE. The quantity of the high level waste was reduced by 1/12 using the 100-ton compressor installed in hot-cell. Also middle and low level waste was reduced by 1/8 using the 60-ton compressor installed in intervention area. Plastic drums were shredded by crusher to be compacted in the ratio of 1/5, used filters in the ratio of 1/6 and the number of drum is also reduced by cutting procedure for the non-volatile materials such as metal.

• Korean System Dynamics Review
• /
• v.12 no.1
• /
• pp.39-57
• /
• 2011

This paper is the result of simulation modeling concerning high-level radioactive waste repository(HLRWR) and people's mind for the facility. We describe a procedure of simulation modeling for resident's policy acceptance and perceived risk of HLRWR facility by using System Dynamics approach. To Complete some complicated works, we made the 20 pieces of stock-flow diagrams based on the causal loop diagram that is a blue print of whole variables and relations. The simulation outputs clearly show that cental government efforts to siting the HLRWR will be failed if nothing to give for the region's residents. On the contrary, a monetary incentive and a regional development program help to turn this gloomy situation into a desirable and acceptable condition dramatically. Government has to prepare the schemes considering the HLRWR acceptance and total supporting program including the cash and local development programs.

• Geotechnical Engineering
• /
• v.40 no.3
• /
• pp.42-73
• /
• 2024

• Geotechnical Engineering
• /
• v.40 no.2
• /
• pp.8-36
• /
• 2024

• Geotechnical Engineering
• /
• v.40 no.4
• /
• pp.9-25
• /
• 2024

• Tunnel and Underground Space
• /
• v.13 no.2
• /
• pp.138-152
• /
• 2003

Three-dimensional computer modeling using FLAC3D had been carried out fur evaluating the thermal-mechanical stability of a high-level radioactive waste repository excavated in several hundred deep location. For effective modeling, a FISH program was made and the geological conditions and rock properties achieved from the drilling sites in Kosung and Yusung areas were used. Sensitivity analysis fer the stresses and temperatures from the modeling designed utilizing fractional factorial design was carried out. From the sensitivity analysis, the important design parameters and their interactions could be determined. From this study, it was found that deposition hole spacing is the most important parameter on the thermal and mechanical stability. The second and third most important parameters were disposal tunnel and buffer thickness.

• Tunnel and Underground Space
• /
• v.29 no.2
• /
• pp.75-88
• /
• 2019

With Kori nuclear power plant unit 1 as a beginning in April 1978, 24 nuclear power plants have been operated in Korea and two more plants are under construction. As the nuclear power plants being operated, radioactive wastes from the plants have been accumulated so that various methods for disposing them have been proposed. In Korea, researches have been conducted, being focused on DGD (Deep Geological Disposal), however, DBD (Deep Borehole Disposal) method needs considering as an alternative. In this technical note, element technologies for DBD were analyzed by compiling previous researches and their applicability on domestic cases were investigated. Conceptual studies regarding relevant designs were conducted and finally, technical challenges for actual disposal were described.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.4
• /
• pp.447-457
• /
• 2019

Japan enacted the "Designated Radioactive Waste Final Disposal Act" for the geological disposal of high-level radioactive waste in 2000 and began the site selection process. However, no local government wanted to participate in the siting process. Therefore, in 2015, the Japanese government developed a new site selection process during the literature survey step, and on June 28, 2017 they published a "Nationwide Map of Scientific Features for Geological Disposal" created with the aim of promoting public participation from local governments. This map illustrated the requirements and criteria to be considered in the early or conceptual stages of securing a geological repository and was useful for improving public understanding and exchanging opinions with local governments by analyzing the suitability of different geological disposal sites.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.11 no.1
• /
• pp.11-21
• /
• 2013

The Geyoungju Ca-bentonite with dry density of 1.6 g/$cm^3$ has been considered as a standard buffer material for the disposal of high level waste in KAERI disposal system design. But it had relatively lower thermal conductivity compared with other surrounding materials, that was one of key parameters to limit the increase of the disposal density in the disposal system. In this study, various additives were selected and mixed with the Ca-bentonite in different mixing methods in order to increase the thermal conductivity from 0.8 W/mK to 1.0 W/mK. As an additive, CNT (Cabon Nano Tube), graphite, alumina, CuO, and $Fe_2O_3$ were selected, which are chemically stable and have good thermal conductivity. As mixing methods, dry hand-mixer mixing, wet milling and dry ball mill mixing were applied for the mixing. Above all, the ball mill mixing was proved to be most effective since the produced mixture was most homogeneous and showed higher increase in the thermal conductivity. From this study, it was confirmed that the thermal conductivity for the Geyoungju Ca-bentonite could be improved by adding small amount of highly thermal conductive material to 1.0 W/mk. In conclusion, it was believed that the experimental results will be valuable in the disposal system design if the additive effects on the swelling and permeability on the compact bentonite are also approved in further studies.

• Tunnel and Underground Space
• /
• v.33 no.1
• /
• pp.10-28
• /
• 2023

Long-term shear behavior of the rock discontinuities should be analyzed and its stability should be evaluated to ensure the long-term stability of a high-level radioactive waste disposal repository. The long-term shear behavior of the discontinuities can be modeled with creep and RSF models. The shear creep test, velocity step test, and slide-hold-slide test can be performed to determine their model parameters or analyze the shear behavior by experiments under various conditions. Testing apparatuses for direct shear, triaxial compression, and biaxial shear were mainly used and improved to reproduce the thermo-hydro-mechanical conditions of local bedrock, and it was confirmed that the shear behavior could vary. In order to design a high-level radioactive waste disposal site in Korea, the long-term behavior of rock discontinuities should be investigated in consideration of rock types, thermo-hydro-mechanical conditions, metamorphism, and restoration of shear resistance.