• Proceedings of the KIPE Conference
• /
• 2008.10a
• /
• pp.97-99
• /
• 2008

계통 연계 인버터 제어 시 계통 전압과 동상인 계통 전류를 공급해주기 위해, 계통 전압의 위상 값을 알아내야 한다. 계통 전압에 고조파가 존재하지 않을 시에 이 위상값은 정확하지만, 고조파 존재 시에 위상 값은 오차가 생긴다. 이 오차는 동기 좌표계 PI 제어기의 지령치에 기본파 외의 고조파를 함유하게 만든다. 그 결과, 계통에 공급하는 계통 전류에 고조파를 함유하게 만든다. 본 논문은 3차 필터를 이용하여 고조파가 존재하는 3상 계통 전압에도 불구하고 기본파의 위상 값만을 추출해내는 PLL을 설계한다. 주파수 응답 이론에 근거하여 해석적으로 필터 변수를 정하며, 이를 검증하기 위하여 모의 실험을 수행한다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.1
• /
• pp.103-111
• /
• 2003

With the proliferation of nonlinear loads such as personal computer in an educational building, high neutral harmonic currents have been observed. High neutral currents in three-phase four ire distribution power systems can cause tots of harmonic problems such as overloaded neutral conductors and malfunction of protective equipment. On-site measurements of harmonic currents and voltages were made and the corresponding equivalent circuits was developed. The circuit model under study was simulated numerically and graphically through the use of the software MATLAB. Simulation results verifying the effect of a single-tuned passive filter for the neutral harmonic current reduction are presented.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.5
• /
• pp.9-17
• /
• 2006

Large steel industries have nonlinear loads such as electric arc furnaces. Harmonic field measurements have shown that the harmonic contents of a waveform varies with time. Direct application of the harmonic assessment to the snapshot measurements would result in ambiguous conclusions depending on which instant is sampled. A cumulative probablistic approach is the most commonly used method to solve time-varying harmonics. Harmonic simulations are performed to evaluate the harmonic voltage and current distortions throughout the system. This paper provides an in depth analysis on harmonics field measurement of the electric arc furnace loads, harmonics assessment by the international harmonic standards IEC 61000-3-6 and IEEE Std. 519 and harmonic simulation for the time-varying harmonics. The EDSA program was used as a simulation tool for the case study.

• Journal of the Korean Magnetics Society
• /
• v.5 no.2
• /
• pp.103-108
• /
• 1995

We propose an analyzing method of the harmonics of output voltage in salient pole syochronous generator. In simulation, 2-D finite elerrent method is used for calculating the stator coil flux linkage considering the rotor movement. As an application of the proposed method, we calculated the harrronics of output voltage in the 150 kw class syochromus generator and compared it with the experirrental result.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.3
• /
• pp.237-245
• /
• 2008

Recently, multilevel H-bridge inverters have become popular in medium to high power ac drive applications. One of significant advantages of them is low harmonic contents in their input line currents thanks to the transformer with multiple phase-shifted secondary windings. This paper attempts to provide basic guidelines for the design of the phase shifting transformer windings and theoretical analysis of input line current harmonics of H-bridge inverters. The part II is devoted to the analysis of the harmonic characteristics of the input line current, providing mathematical background for the equidistant phase-shifting angle distribution policy for harmonic elimination.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.4
• /
• pp.12-20
• /
• 2006

Heavy chemical industries have nonlinear loads including electrolyzers. The electrolysis consists of AC-BC converters which generate harmonic currents and create distortions on the sinusoidal voltage of the power system. This paper provides in depth an analysis on harmonics field measurement for the electrolyzer loads, adding a single-tuned filter at the customer bus for reducing harmonic distortion and harmonic assessment by the international harmonic standards IEC 61000-3-6 and IEEE Std. 519. The EDSA program was used as a simulation tool for the case study.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.6
• /
• pp.35-42
• /
• 2006

Large steel industries have nonlinear loads including electric arc furnaces. These nonlinear loads generate harmonic currents and create distortions on the sinusoidal voltage of the power system. This paper provides an in depth analysis on harmonics field measurement of the electric arc furnace loads, adding a single-tuned filter at the customer bus for reducing harmonic distortion and harmonics assessment by the international harmonic standards IEC 61000-3-6 and IEEE Std. 519. The EDSA program was used as a simulation tool for the case study.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1007_1008
• /
• 2009

본 논문은 3상 NPC형 3-레벨 인버터를 영시퀀스 주입에 의한 SVPWM방식에 고조파의 특성이 가장 우수하다고 알려진PD(phase disposition)방식의 멀티 캐리어 방식을 적용하였다. 구현된 NPC형 3-레벨 인버터는 전 영역에서 동작할 수 있도록 구현하여, 각 영역에 따른 고조파 및 THD를 분석하였다. 일반적은로 NPC형 3-레벨 인버터는 2-레벨 인버터에 비해 동일 변조비에서 고조파의 특성이 우수 한 것으로 알려졌다. 본 논문에서는 이러한 변조비에 따른 고조파의 분포 이중 푸리에 시리즈를 통해 분석하였고, 이를 시뮬레이션을 통하여 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.179-181
• /
• 2005

PWM(Pulse Width Modulation) 컨버터에서 공급 전압의 품질은 교류 입력전류 및 직류 출력전압의 품질에 큰 영향을 미친다. 공급전압이 불평형 또는 고조파가 포함된 경우에는 평형 전원전압의 경우보다 입력 전류의고조파 및 역률 특성이 저하된다. 또한 컨버터 입력 측의 사용된 인덕턴스의 용량에 따라 입력전류의 고조파 및 역률 특성이 달라진다. 본 논문에서는 입력측 인덕턴스 값의 변화에 따른 단상 및 삼상 PWM 컨버터의 입력전류 고조파와 역률 관계를 해석하였는데, 특히 입력전압에 고조파를 포함한 경우와 불평형인 상태까지 확장하여 성능을 평가하였다. 이러한 결과를 통해 입력 인덕턴스 설계 값을 선정하는데 기준을 제시하였다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.6 no.4
• /
• pp.1-7
• /
• 1969

A Series Inverter circuit is analyzed and Fourier analysis is applied to its output waveform. It is proved that under the optimum condition the Output is nearly sinusoidal wave which contains only odd harmonic Components and the relative amplitude of the hramonic components are expressed with very simple formula which contain only "Q" of the circuit as a parameter.parameter.