• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.4
• /
• pp.22-29
• /
• 2002

Usually, much harmonics are included and cause harmonic loss of motor, torque pulsation, electro-magnetic noise and shock etc. by switching function of inverter when drive induction motor variableness inside. It applied partial resonant Buck converter and three phase voltage type SPWM inverter circuit to induction motor driving system in this paper that see to solve such problem. Changed operation condition variously to do input current of circuit that propose sine-wave by unit power factor almost and capacitor supplied bringing back to life voltage by power supply arranging properly assistance diode and electric power switching. Power factor and efficiency improved as that minimize variation of input at power supply voltage polarity reverse by that add voltage reversal function. Also, by using output filter, reduced harmonic of output line to line voltage components, and introduce state space analysis and forecast operation of rectifier. Such all items confirmed validity through simulation and an experiment.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.12
• /
• pp.2002-2008
• /
• 2001

Nonlinear vibration characteristics of a piezoelectric-type micro actuator used for hard disk drives are experimentally studied. The nonlinear characterisitics include hysteresis, superharmonic resonance, jump phenomenon, and shifting of natural frequencies. The vibration modes and frequencies of the commercial actuator of the Hutchinson's Magnum series are measured using a laser vibrometer. From harmonic excitation to the PZT acturator, we observe interesting hysteresis patterns with 3 times input frequency. It is shown that the micro actuator has the typical 3 times superhamonic resonances coupled to the first torsional and sway modes of the suspension.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.935-940
• /
• 2005

In this paper, dual rotor disk configuration with a coreless stator is proposed for the Lorentz force type integrated motor bearing system. An experimental compensation for the effects of high order harmonics is performed using the digital controller of the experimental setup. The runout profile and rotor unbalance are also identified by the extended influence coefficient method. The experimental results confirm that this compensation method effectively attenuates the rotor vibration all over the operating range of rotational speed.

• Journal of KSNVE
• /
• v.8 no.5
• /
• pp.887-899
• /
• 1998

It has been resulted that Lagrange multiplier method with statistical approach was superior to traditional harmonic balance method in identifying the nonlinear loudspeaker parameters when output signals were contaminated with Gaussian random noise. We have known that the displacement-dependent characteristic values of nonlinear parameters identified by traditional harmonic balance method were estimated less than original values by the increase of output noise and the stiffness coefficients were very sensitive to output noise. Also, by the sensitivity analysis we have verified that the harmonic distortions in acoustic radiation was mainly due to nonlinearity of force factor caused by uneven magnetic fields and that reducing the nonlinearity of damping coefficients were very effective for improving second harmonic distrotion of acoustic radiation.

• Journal of KSNVE
• /
• v.8 no.5
• /
• pp.879-886
• /
• 1998

An automated calibration system of sound level meters was developed and tested. As a standard sound source, the speaker unit(Forstex FE208) cabineted by 440$\times$390$\times$490 $\textrm{mm}^3$(LHW) volume wood box was adopted. Including this source, the driving part was found out to have a good linearity of sound pressure output vs AC voltage input. The Hybrid-Bisect/Newton-Raphson method modified by the linearity was adopted as a searching algorithm. Uisng GPIB interface, the console PC make the control, measurements, and calculations and finally make the accumulation of useful data and results automatically by the instructon in the program coded by C languate. Several trials of automatic calibration using this developed system give the reliable results.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1062-1063
• /
• 2015

오프 그리드 형태의 소형풍력발전기는 도심지 또는 사람이 거주하는 지역에 설치되므로 소음, 진동, 안전성 등에 많은 문제가 야기되고 있다. 풍력발전기 내부적으로 소음 및 진동에 가장 큰 영향을 미치는 요소는 코깅토크로 발전기 회전자가 회전할 때 고정자 슬롯과 회전자 영구자석 사이 공극 릴럭턴스 변화에 의해 발생한다. 또한, 코깅토크는 풍력발전기의 초기 기동 풍속에 영향을 미치며, 토크리플 증가의 원인이 되어 코깅토크 저감 설계는 소형풍력발전기 설계에서 필수적으로 이루어져야 한다. 본 논문에서는 실험계획법을 진행하여 이중고정자 발전기의 영구자석 형상 최적화 설계를 통해 코깅토크를 저감 설계를 실시하였으며, 추가적으로 발전기 출력 전압 고조파 발생을 저감시켰다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.9 s.102
• /
• pp.1045-1052
• /
• 2005

Tn this paper. dual rotor disk configuration with a coreless stator is proposed for the Lorentz force type integrated motor hearing system. An experimental compensation for the effects of high order harmonics is performed using the digital controller of the experimental setup. The runout profile and rotor unbalance are also identified by the extended influence coefficient method. The experimental results confirm that this compensation scheme effectively attenuates the rotor vibration all over the operating range of rotational speed.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.2
• /
• pp.92-100
• /
• 1995

In this study, the bearing defects were modeled and the vibration of ball bearing faults was presented for the defective pattern. The vibration signal was measured for the single and multiple defected ball bearing at the various defect positions and rotation speed, and then the signal components using the HFRT(high frequency resonance technique) were analyzed by FFT. The experimental data analysis has shown that the frequencies generated in the single or multiple defected ball bearings appear with the characteristic defect frequency and harmonics of ball pass frequency peak. Signal processing by HFRT makes it possible not only to detect the presence of a defect but also to diagnose the defect part of the bearing.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.803-804
• /
• 2006

우리는 이전 논문을 통해 Air blower용 모터에서 널리 사용되고 있는 단상 유도기를 기존의 분포 권선 방식에서 벗어나 집중 권선 방식을 사용하여 설계한 결과 생산 공정의 단계를 줄이고 많은 생산 비용을 줄일 수 있었다. 또한 집중 권선형에서 발생할 수 있는 고조파 문제를 로터의 skew와 overlap 권선 방식을 이용하여 해결 할 수 있음을 증명하였다. 그러나 이러한 이점에도 불구하고 시제품의 특성을 측정한 결과 집중 권선형 모터의 자계 불균형 때문에 기존 분포권 모터에 비해 소음과 진동 특성이 좋지 않은 결과를 보였다. 이에 본 논문에서는 소음과 진동 특성을 고려하여 기존의 기동 및 정격 토크 특성을 유지하면서 토크 리플을 저감할 수 있는 방법을 로터의 Skew 각도 영향, 권선 사양 및 스테이터 및 로터 형상 등을 고려하여 새롭게 설계하였고 그 결과를 제시하였다.

• Journal of the Korea Convergence Society
• /
• v.8 no.5
• /
• pp.179-184
• /
• 2017

The cage of a tapered roller bearing keeps the gap between the rollers, which prevents friction, wear and suppresses heating. The material of the cage is changing from metal to plastic for lightening the weight. If the cage is severely deformed due to resonance, the roller may not be able to roll and even get off the cage. In this paper, the dynamic characteristics of the cage is analyzed according to the cage material. Under the assumption that a train runs at the highest speed, frequency harmonics of that speed is calculated, and the comparative analysis is carried out in order to select the optimum thickness of the cage, which is easy to change among the cage design variables for avoiding the resonance.