• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.11a
• /
• pp.46-48
• /
• 2011

기존의 참조 소프트웨어인 MPEG-2, MPEG-4, H.264/AVC에서는 움직임 벡터를 찾을 때 항상 고정된 해상도를 사용하였으며 다른 참조 소프트웨어인 KTA에서는 움직임 벡터를 찾을 때 움직임벡터의 해상도를 슬라이스 단위로 성능이 가장 높은 해상도를 선택해서 사용하였다. 하지만 움직임 벡터의 해상도는 블록마다 서로 다르기 때문에 블록별로 서로 다른 해상도를 적응적으로 사용할 필요가 있다. 적응적인 움직임 벡터 해상도 부호화 방법은 이러한 점을 이용하여 블록 별로 현재 블록의 움직임 벡터가 1/4 해상도인지 1/8 해상도인지에 판단하고 그에 대한 정보를 복호기에 전송해준다. 제안하는 알고리즘은 적응적 움직임 벡터 해상도를 사용하여 부호화 할 때 1/8 해상도 움직임 벡터가 성능이 없다고 판단되는 곳에선 적응적 움직임 벡터 해상도 방식을 사용하지 않고 1/4 해상도로만 움직임 벡터를 찾는다. 이러한 경우 해상도 정보를 복호기에 전송하지 않아 부호화 효율을 높일 수 있고 또한 1/8 해상도에 대한 움직임 예측을 하지 않기 때문에 부호화기 복잡도를 낮출 수 있다. 실험결과 평균 0.2%의 성능을 얻을 수 있었으며 부호화기 복잡도는 4% 감소하였다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.6
• /
• pp.70-80
• /
• 2008

This paper presents comparison of 18000-3 ASK and PJM mode RFID in terms of reading speed. This is accomplished by counting the occurrences of a few representative blocks which constitute the reader / tag interactions for each mode. To apply FS (frame slotted)-aloha protocol, four Q-algorithms, which are a Q-algorithm suggested in the standard document, a fixed Q-algorithm, a minimum Q-algorithm and the number of tag dependent Q-algorithm, are used. Through some simulations, we present the reading speed of each mode with respect to the Q-algorithm and the comparison of the reading speed between the two modes for each Q-algorithms.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.80-83
• /
• 2010

This paper describes an analysis of decoding performance of multi-mode LDPC(Low Density Parity Check) decoder which supports three block lengths (648, 1296, 1944) and four code rates (1/2, 2/3,3/4, 5/6) for IEEE 802.11n WLAN system. A fixed-point model of LDPC decoder which adopts min-sum algorithm and layered decoding scheme is implemented using Matlab. From fixed-point simulation results for various bit-width parameters such as internal bit-width, bit-width of integer and fractional parts, an optimal design condition and decoding performance of LDPC decoder are analyzed.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.361-363
• /
• 2005

본 논문에서는 MPEG-4 Version2 Audio 표준에 근거하여 낮은 연산부담을 갖는 독자적인 엘고리즘을 적용한 MPEG-4 BSAC Audio 디코더를 개발하였다. 개발된 BSAC 디코더는 32bit RISC 구조를 갖는 Intel Xscale Processor 기반 시스템에 최적화하여 구현 및 평가를 수행하였다. 수행속도 증가 및 연산 정밀도 향상을 위해 각 기능 블록별 기능 및 구현 원리 연구와 32 bit 연산 구조를 파악하여, 이를 고정소수점 연산 구조로 구현함으로써 성능을 향상시켰다. 유한비트에 따른 오차 영향을 최소화하기 위해 데이터의 표현 범위에 대한 연구를 통해 근사한 오차를 최소화 하여 연산 정밀도를 향상 시키고자 하였다. 비선형 양자화기 및 filter bank 등 상대적으로 높은 연산 부담을 갖는 기능 블록은 Table look-up, 보간법, 지수연산 제거, pre/post scrambling 기법 등을 적용하여 최적화 하였다. 최종적으로 개발된 BSAC 디코더는 32 bit 연산 구조의 X-scale 프로세서를 탑재한 Development Board와 WindowsCE OS로 구성된 타겟 system에 이식하여 performance 평가하였으며, 높은 연산 정밀도 및 다른 수행속도를 확인할 수 있었다. 주관적인 청각 평가에서도 MPEG-4 reference 디코더와의 음원의 차이가 거의 없음을 확인하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.9
• /
• pp.2080-2089
• /
• 1997

Recent evolution in compute technology makesthe multimedia processing widely availiable. Conventional storage systems do not meet the requirements of multimedia data. Several approaches were suggested to improve disk storing methods for them. Bocheck proposed a disk partitioning technique for multiple steams assuming that all steams have same retrieval intervals with the same amount data for each access. While Bocheck's one provides a good method for same period, it does not consider the case of different periods of continous media streams. This paper proposes a new partitioning technique in which a fixed number of blocks are assigned for stresms with different retrieval periodicity. The analysis shows this problem is the same as the one scheduling the steams into a given sequence. The simulation was done to compare the proposed m-sequence merge method with the conventional Scan-EDF and Partitioning methods.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.2
• /
• pp.432-438
• /
• 2011

This paper describes an analysis of optimal design conditions of multi-mode LDPC(low density parity check) decoder which supports three block lengths (648, 1296, 1944) and four code rates (1/2, 2/3, 3/4, 5/6) for IEEE 802.11n WLAN system. A fixed-point model of LDPC decoder, which adopts min-sum algorithm and layered decoding scheme, is implemented using Matlab. From fixed-point simulation results for various bit-width parameters such as internal bit-width, integer/fractional part bit-widths, optimal design conditions and decoding performance of LDPC decoder are analyzed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.236-236
• /
• 2018

한국농어촌공사 농어촌연구원에 구축되고 있는 대형 수리모형 실험시설은 수공구조물에 대한 수리모형실험 수행, 설계기준 제 개정, 호안 검인증제도 지원 등 국가의 정책지원과 개방 공유를 통한 국내 건설기업의 하천분야 신기술 개발 및 국가 경쟁력 확보, 하천 관련 원천기술 확보 등 다양한 목적을 가지고 진행되고 있는 대규모 분산공유형 실험시설에 해당한다. 본 사업의 일환으로 현재 구축 진행되고 있는 7종의 실험수로는 장기하상변동, 토석류, 실규모 호안블록, 감세공 수리특성, 신형어도개발 등 다양한 수리특성에 대한 계측 및 분석이 가능한 대형 실험시설에 해당한다. 7종의 실험수로는 PIV시스템의 연계 계측이 가능한 1) 고정식개수로, 2) PIV실험수로와 1/5의 역경사 재현이 가능한 3) 가변식경사수로, 호안블록 및 사석의 소류력 측정이 가능한 4) 고정식급경사수로, 토석류흐름 측정이 가능한 5) 가변식하도실험수로, 장기하상변동 분석을 위한 6) 대형유사순환수로, 부유사의 침 퇴적 양상 재현을 위한 7) 소형유사순환수로로 구성되어진다. 7종의 실험수로는 '18년 2월에 착공하여 현재 실시설계도서를 검토 중에 있으며, 18년 9월에 준공될 예정이다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.5 s.305
• /
• pp.95-102
• /
• 2005

When images compressed with block-based compression techniques are transmitted over a noisy channel, unexpected block losses occur. In this paper, we present a post-processing-based block recovery scheme using Haar wavelet features. No consideration of the edge-direction, when recover the lost blocks, can cause block-blurring effects. The proposed directional recovery method in this paper is effective for the strong edge because exploit the varying neighboring blocks adaptively according to the edges and the directional information in the image. First, the adaptive selection of neighbor blocks is performed based on the energy of wavelet subbands (EWS) and difference of DC values (DDC). The lost blocks are recovered by the linear interpolation in the spatial domain using selected blocks. The method using only EWS performs well for horizontal and vertical edges, but not as well for diagonal edges. Conversely, only using DDC performs well diagonal edges with the exception of line- or roof-type edge profiles. Therefore, we combined EWS and DDC for better results. The proposed methods out performed the previous methods using fixed blocks.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.32 no.2
• /
• pp.163-170
• /
• 2022

LEA is a lightweight block cipher developed in Korea in 2013. In this paper, among block cipher operation methods, CTR operation mode and GCM operation mode that provides confidentiality and integrity are implemented. In the LEA-CTR operation mode, we propose an optimization implementation that omits the operation between states through the state fixation and omits the operation through the pre-operation by utilizing the characteristics of the fixed nonce value of the CTR operation mode. It also shows that the proposed method is applicable to the GCM operation mode, and implements the GCM through the implementation of the GHASH function using the Galois Field(2¹²⁸) multiplication operation. As a result, in the case of LEA-CTR to which the proposed technique is applied on 32-bit RISC-V, it was confirmed that the performance was improved by 2% compared to the previous study. In addition, the performance of the GCM operation mode is presented so that it can be used as a performance indicator in other studies in the future.

• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.1043-1048
• /
• 2009

PES (Programmable Electronic System) is used by software development for the train control system. PES has been widely used in real world and consists of hardware, firmware and application software. The PES are easily apply to many applications because its implementation has high flexibility. Many safety critical functions are realized through software in safety critical system. Normally, it is difficult to detect failures for PES system because the PES is too sophisticated to identify sources of the failure. So, the reliability analysis is needed by using software fault tolerance techniques. Currently, there are the recovery block, distributed recovery block, N-version programming, N self-checking programming in fault tolerance techniques. In this paper, the models of recovery block and N-version programming in software fault tolerance techniques are suggested by using the Markov model. Also, the reliability in the train control system is analyzed through changing time. The fault occupancy rates of the program, adjustment test and voter are stationary. So, the relation between time and reliability is presented by using Matlab program. In the result of reliability, the reliability of recovery block is more high than N-version programming in case of the same number of substitution block.